Skip to content

About

Dark industrial and EBM firmware for the M-VAVE FM-1, built on Felucca

Topics

Resources

Contributing

Security policy

Stars

2 stars

Watchers

0 watching

Forks

Repository files navigation

KRIECHSTROM

by Grigorii Bezborodov

build and test License: GPL-3.0-only Release

Dark industrial and EBM firmware for the M-VAVE FM-1. Built on Felucca, with parts of Glitchbox: thanks to both for the inspiration and the groundwork.

KRIECHSTROM

Kriechstrom is German for creepage current, the leakage across worn insulation that leaves a branching mark like the one above.

Also on VIBE FM: KRIECHSTROM for VIBE FM, the same sound as a native Vibe (site).

Why

Glitchbox is built on Felucca 1.5.1 for the older FM-1 flash chip and does not run on the newer units (UC25HQ80, 0xB36014). KRIECHSTROM is built on the current Felucca, which supports both, and brings over the parts of Glitchbox it needed.

What it adds to Felucca

  • GLCH engine (from Glitchbox): clipping, wavefolding, a resonant filter, bit crushing and micro-stutter; 56 sounds, most with a distortion pedal set
  • HOWL and MIC in GLCH: no oscillator, a loop that feeds itself; HOWL a string in overdrive that sustains and screams in tune, MIC a microphone in front of a speaker that howls at the note
  • 185 sounds in 13 engines, 19 drum kits including DESTROY
  • six drum kits of its own (KIT ROOM, GATE, MARCH, ARC, ROT, SLAB): its own voices, each kit with its own room or grit (a squashed room, a gated snare, only impacts, sparks, a falling sample rate, noise); every hit a short impact
  • DICE: hold SEQ, press F5, the track gets a new part in one of eight moods (MACHINE, GRIND, MARCH 7/8, GLITCH, SPIRAL, GHOST, SURGE, HUSH); G5 picks the mood
  • HAPPY ACCIDENT: hold EDIT, press G5, two or three parameters of the sound change at random; hold SAVE to undo
  • DAMAGE on the master: tape (darker, wobbling, sagging) to digital (bits, lower rate, hard cuts), its level kept; the same as the DAMG pedal on one track
  • WALL: one knob from quiet to a wall of sound (the mix double-tracked, an octave added under its low end, squeezed hard, the sends and distortion pushed, the FILL steps), its level kept; FX + SELECT
  • HISS: a tape's noise floor on its own knob
  • INFECT: a sidechain pedal; one track drives another (GATE, DUCK, CRUSH, FOLD, RING) or talks through it (VOX, an 8-band vocoder); the source may sit at LEVEL 0
  • RESONATE: four strings on the master tuned to a chord, rung by everything that plays
  • HAUNT: one of two on the master: SUCK (a reverse swell into each snare and clap), DRAG (a tape brake on each bar's last beat, down to an octave)
  • SPLICE: the tape of the whole mix cut and glued back wrong on the sixteenths (repeats, reverses, misplaced pieces, half speed, dropouts), one knob
  • MUFF, BASS and SMASH pedals, ROLL and GATE live effects (from Glitchbox)
  • power-on sounds and patterns that play when PLAY is pressed
  • the STROM theme (black and red), large values and hints on screen, effects that toggle with a tap
  • screen reader support: the screen said aloud with Charles Vestal's FM-1 Screen Reader, for blind and low-vision musicians
  • its own USB name and identity FM-1_57810002; works with the newer FM-1 flash (0xB36014)

Projects and sounds: KRIECHSTROM reads Felucca's projects, user presets and samples as they are. Projects of other firmwares are not read; back them up before installing.

Everything Felucca does still works: the 64-step sequencer with locks, conditions, ratchets, automation and songs, the FX layer, chord keys, the arpeggiator, MIDI in over USB and TRS, MIDI learn, USB audio, the web editor.

Install

Connect the FM-1 by USB and open the web installer in Chrome or Edge: https://xforsa.github.io/kriechstrom/webapp/installer/ (or the .fwsc from the releases with tools/fm1_install.py). The installer can take you back to the official V15 or V16. Back up your projects first.

Manual

English: https://xforsa.github.io/kriechstrom/manual/en.html, Russian: https://xforsa.github.io/kriechstrom/manual/ru.html, with a cheat sheet of the button combinations that are not printed on the panel.

Build

See BUILDING.md. In short: ./build.sh --release X.Y (Docker and the JieLi toolchain), then sh tests/run_tests.sh for the host tests.

Contributing

Bugs to Issues, ideas and music to Discussions. See CONTRIBUTING.md and CHANGELOG.md.

Credits and licence

KRIECHSTROM is a fork of Felucca by Leo Kuroshita, Hügelton Instruments (GPL-3.0-only), with the GLCH engine, the DESTROY kit, the MUFF / BASS / SMASH pedals and ROLL / GATE from Glitchbox by erikdevos (GPL-3.0-only) and ideas from DIRGE by sinscum. The screen reader's device side (firmware/src/announce.c, tools/gen_words.py) is from fm1-base by Charles Vestal (MPL-2.0), for his FM-1 Screen Reader. Everything Felucca credits is in CREDITS.md; the licences in LICENSING.md and LICENSES/.

Free software under the GPL-3.0-only: if you share builds, share the source. Not affiliated with M-VAVE or Hügelton Instruments. M-VAVE and FM-1 are trademarks of their owners.

You can also try KRIECHSTROM in the browser, no flashing needed, in the free community FM-1 Emulator.

About

Dark industrial and EBM firmware for the M-VAVE FM-1, built on Felucca

Topics

Resources

Contributing

Security policy

Stars

2 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages