chore(deps): bump the prod-minor-patch group in /frontend with 2 updates

[dependabot]

Bumps the prod-minor-patch group in /frontend with 2 updates: @turf/circle and maplibre-gl.

Updates @turf/circle from 7.3.5 to 7.4.0

Release notes

Sourced from @​turf/circle's releases.

v7.4.0

What's Changed

⚠️ Due to correctness fixes, behavior across the boolean-* methods has changed. If you depended on the invalid behavior of these methods take extra care when upgrading.

@​turf/bearing

• Fix final bearing returning values outside [-180, 180] by @​JSap0914 in Turfjs/turf#3077

@​turf/bezier

• Fix z value computation by @​githubhanjunjun in Turfjs/turf#3042

@​turf/boolean-contains

• Allow boundary points in MultiPoint containment checks by @​rexxars in Turfjs/turf#3024
• Treat an equal two-vertex line as contained by @​spokodev in Turfjs/turf#3080
• Add MultiPolygon support for non-polygon types by @​rexxars in Turfjs/turf#3010
• Speed up point, line, and MultiPolygon hot paths by @​rexxars in Turfjs/turf#3099
• Reject inner polygon whose edge crosses a concave outer polygon by @​aloktomarr in Turfjs/turf#3104

@​turf/boolean-crosses

• Make MultiPoint/LineString crossing order-independent by @​spokodev in Turfjs/turf#3079
• Return false if a line/line intersection is on an endpoint by @​mfedderly in Turfjs/turf#3070

@​turf/boolean-disjoint

• Overlapping collinear lines should return false by @​cycsmail in Turfjs/turf#3097
• Test for explicit line/line touch on a boundary point by @​mfedderly in Turfjs/turf#3100
• Performance: Delegate flattening to booleanDisjoint by @​rexxars in Turfjs/turf#3103

@​turf/boolean-point-in-polygon

• Perf improvement & Fix issue with multiple polygons when the point is on the boundary of a polygon by @​Pitouli in Turfjs/turf#2821

@​turf/boolean-valid

• Add support for GeometryCollection geometries by @​ltkum in Turfjs/turf#2916
• Allow MultiLineStrings with only a single LineString by @​sharmaB01 in Turfjs/turf#2846

@​turf/boolean-within

Internally this has been rewritten to use @​turf/boolean-contains. This increases correctness, but the additional checks may have regressed performance slightly depending on inputs (it is actually faster for some inputs).

• Require an interior point in MultiPoint-in-Polygon check by @​mahirhir in Turfjs/turf#3085
• Add MultiPolygon support, de-duplicate logic by @​rexxars in Turfjs/turf#3011

@​turf/clusters-dbscan

• Correctly honor units option by @​mradlinski in Turfjs/turf#3026

@​turf/combine

• Docs: add MultiGeometries to input type by @​rczobor in Turfjs/turf#2935

@​turf/convex

• Correctly include properties in the final result by @​blchelle in Turfjs/turf#2972

@​turf/helpers

• Add short forms for Units and AreaUnits by @​Johse in Turfjs/turf#3063

... (truncated)

Commits

• 22acbd8 v7.4.0
• ebb20d8 Update release workflow (#3119)
• 7b99235 Bump softprops/action-gh-release from 2.2.1 to 3.0.2 (#3114)
• 2cd17ea Bump actions/checkout from 4.2.2 to 7.0.1 (#3117)
• 841895e Bump actions/setup-node from 4.3.0 to 7.0.0 (#3116)
• b117389 Bump pnpm/action-setup from 4.1.0 to 6.0.9 (#3115)
• d496ae1 Dependabot - Keep GitHub actions up to date (#3113)
• 73b2589 Clarify geomEach behavior and add a test (#3112)
• fc7bc94 line-offset - Fix bench.ts (#3111)
• d05f1fd fix(boolean-contains): reject inner polygon whose edge crosses a conc… (#3104)
• Additional commits viewable in compare view

Updates maplibre-gl from 6.0.0 to 6.1.0

Release notes

Sourced from maplibre-gl's releases.

v6.1.0

✨ Features and improvements

• Add support for updating an ImageSource with an already-decoded image (HTMLImageElement, HTMLCanvasElement, ImageBitmap or ImageData) directly via ImageSource.updateImage({image}), skipping the network request (#7944) (by @​mondsichtung)
• Add GeoJSONSource.getClusterOptions to get a source's current cluster options (cluster, clusterMaxZoom, clusterRadius) (#7948) (by @​lazerg)
• Support global-state expressions in sky.*, light.* and projection.type properties (#7966, #7967, #7968) (by @​CommanderStorm)
• Add MapOptions.rotateSpeed and MapOptions.pitchSpeed, the degrees the bearing/pitch change per pixel dragged (#7949) (by @​clement-igonet)
• Show a grab cursor over draggable markers, including on non-interactive maps (#8019) (by @​hugosmoreira)

🐞 Bug fixes

• Use role=img for non-interactive default markers and role=button when they become interactive (#7790) (by @​cat0825)
• Fix an error thrown when a paint property transitions between arrays of different length (#6606) (by @​HarelM)
• Fix renderer crash when RasterTileSource.setTiles/setUrl is called while the source contains errored tiles (#7911) (by @​lazerg)
• Fix 3D buildings disappearing when the camera pitches up to look near the horizon, by growing tile-culling bounds as the frustum's bottom edge (from pitch and FOV) approaches horizontal (#7633) (by @​clement-igonet)
• Fix globe latitude precision on some GPUs (e.g. Mali) by reformulating the mercator-to-sphere Y coordinate algebraically (exp + rational arithmetic instead of atan/sin/cos), avoiding float32 cancellation and imprecise hardware transcendentals near the equator; the runtime GPU atan-error measurement/correction this superseded has also been removed (#7419) (by @​clement-igonet)
• Fix a race in RasterTileSource.loadTile and ImageSource.load where a tile/image aborted during an awaited transformRequest passed an undefined AbortController into the image request queue, crashing it with TypeError: Cannot read properties of undefined (reading 'signal') (#8004) (by @​jan-grzybek)
• Fix setTerrain not destroying the previously active terrain when switching to a new configuration, which leaked its GPU resources and left the old source still configured as a terrain source (#7990) (by @​lazerg)
• Fix fill and line layers being rendered twice near the antimeridian on globe when looking at poles or when zoomed out (#6248) (by @​pabueco)

Changelog

Sourced from maplibre-gl's changelog.

6.1.0

✨ Features and improvements

• Add support for updating an ImageSource with an already-decoded image (HTMLImageElement, HTMLCanvasElement, ImageBitmap or ImageData) directly via ImageSource.updateImage({image}), skipping the network request (#7944) (by @​mondsichtung)
• Add GeoJSONSource.getClusterOptions to get a source's current cluster options (cluster, clusterMaxZoom, clusterRadius) (#7948) (by @​lazerg)
• Support global-state expressions in sky.*, light.* and projection.type properties (#7966, #7967, #7968) (by @​CommanderStorm)
• Add MapOptions.rotateSpeed and MapOptions.pitchSpeed, the degrees the bearing/pitch change per pixel dragged (#7949) (by @​clement-igonet)
• Show a grab cursor over draggable markers, including on non-interactive maps (#8019) (by @​hugosmoreira)

🐞 Bug fixes

• Use role=img for non-interactive default markers and role=button when they become interactive (#7790) (by @​cat0825)
• Fix an error thrown when a paint property transitions between arrays of different length (#6606) (by @​HarelM)
• Fix renderer crash when RasterTileSource.setTiles/setUrl is called while the source contains errored tiles (#7911) (by @​lazerg)
• Fix 3D buildings disappearing when the camera pitches up to look near the horizon, by growing tile-culling bounds as the frustum's bottom edge (from pitch and FOV) approaches horizontal (#7633) (by @​clement-igonet)
• Fix globe latitude precision on some GPUs (e.g. Mali) by reformulating the mercator-to-sphere Y coordinate algebraically (exp + rational arithmetic instead of atan/sin/cos), avoiding float32 cancellation and imprecise hardware transcendentals near the equator; the runtime GPU atan-error measurement/correction this superseded has also been removed (#7419) (by @​clement-igonet)
• Fix a race in RasterTileSource.loadTile and ImageSource.load where a tile/image aborted during an awaited transformRequest passed an undefined AbortController into the image request queue, crashing it with TypeError: Cannot read properties of undefined (reading 'signal') (#8004) (by @​jan-grzybek)
• Fix setTerrain not destroying the previously active terrain when switching to a new configuration, which leaked its GPU resources and left the old source still configured as a terrain source (#7990) (by @​lazerg)
• Fix fill and line layers being rendered twice near the antimeridian on globe when looking at poles or when zoomed out (#6248) (by @​pabueco)

Commits

• 3d50bcf Bump js version to 6.1.0 (#8058)
• 5d50057 chore(deps-dev): bump rollup from 4.62.2 to 4.62.3 (#8055)
• 8ad192c chore(deps-dev): bump globals from 17.7.0 to 17.8.0 (#8056)
• b143343 fix: clip z0 tile at antimeridian on globe to prevent double rendering (#7896)
• 7e8e1e4 Add a Vitest bench lane for micro benchmarks (#8047)
• 985df32 Show grab cursor for draggable markers (#8023)
• cb32014 chore(deps-dev): bump postcss from 8.5.22 to 8.5.23 (#8042)
• 1ab477c chore(deps-dev): bump eslint from 10.7.0 to 10.8.0 in the eslint group (#8040)
• cb98660 Fix npm run benchmark (#8027)
• b2e4cc1 chore(deps): bump github/codeql-action/analyze from 4.37.2 to 4.37.3 (#8036)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions