V4.90

Changes

• Added on display shot counter for latency testing
• Added automatic test delay for fast displays to get better start data (press HOME to enable, END to disable manually in the UE4 test window)
• Added adaptive backlight limiter check and warning (may need refinement)
• Improved the processing code to be more accurate in edge cases
• Fixed EDID name errors
• Fixed 0-255-0 colour
• Added default response time type control
• Improved gamma table interpolation
• Tweaked scaling control
• Fixed message boxes showing titles as message and vice versa

V4.85

Changes

• Fixed flicker filter setting dropdown
• Fixed out of bounds error in processing results

V4.8

Changes

• Added a new display flicker filter for response time testing.
  
  It turns the above, into the below!
  
  Specifically it searches for drops (that recover to a similar level to pre-drop) and replaces the data with interpolated data. This does not affect OLED results, but should help an awful lot for flickering displays. This won't help certain types of flicker though - ULMB just doesn't output any useable light so I can't work magic, and some low frequency MiniLED displays won't be helped, but for some this is a major improvement in processing.

This is also something you can disable in the result settings if you find it interferes with a certain type of result - but please do email/raise an issue with the data you find it messes up so I can improve the function!

V4.7

Changes

• Made the Live View mode save data to file
• Added a control for the moving average filter the program uses to smooth noisy data (useful for extra-noisy displays/TVs)
• Added experimental support for OSRTT Expert

V4.6

Changes

• Disabled "Calibrate Brightness" mode for Pro/CS users as it isn't meant for that tool
• Fixed "N/A" folder bug
• Made 100ms the default capture time
• Added digital potentiometer timeout for rare cases where brightness cal gets stuck in an endless loop
• Officially support Pro CS versions with appropriate (V2.0) firmware. V1.9 was shipped on some units so I've skipped to V2.0 for uniformity.

V4.52

Changes

• Fixed FPS limit bug in software

V4.51

Changes

• Fixed firmware not updating for Pro boards resulting in firmware not compatible warnings.
• Fixed spelling and format error on firmware warning warning

V4.5

Changes

• [BREAKING] Added refresh rate limits of 480, 500, 540 (requires both firmware and software update to work, otherwise FPS limit functionality will break)
• Improved the backlight strobing check on OSRTT Pro to allow you to continue despite strobing (can't guarantee accurate results)
• Added run counter to OSRTT Pro display
• Improved windows scaling issue

V4.3

Changes

• Fixed OSRTT V1 not working for input latency testing
• Swapped to using per-compiled firmware for better compatibility

Post launch update

I've fixed an issue with the installer to install to the correct location. If you have issues with the program launching, please give the new installer a shot.

V4.2

Changes

• Fixed bug with Pro firmware not updating

Known Issues

• Original OSRTT units won't be able to run the input lag test - I'm already fixing it and will have an update soon!