Simplify Dockerfile by removing multi-stage builds

[andyrvcom]

Commit: b29bea4: 14 test cases ran, 4 failed ❌, 8 passed ✅, 2 additional findings ⚠️.

What went wrong:
The run surfaced real defects on the start/orchestration path: runner controls are sent from the UI but dropped or hardcoded server-side (including no numeric guardrails on the start body), callback errorCode is accepted but not persisted into execution classification, and the automation route can incorrectly render not-found due to DB/env initialization order.
Separately, step cards poll report-summary before artifacts exist, causing noisy 404s. Non-admin denial, callback token rejection, stale/tampered payloads, and several cost/report contract checks did pass — those areas appear stable — but the issues above carry the highest risk of a regression on this surface.

To reduce merge risk, address:

Server-side validation and orchestration accept and apply runner-control fields (or the API contract is narrowed and the UI is updated so they cannot diverge).
Numeric bounds for runner controls are enforced on the start path (clamp/reject), not only in the browser.
errorCode (or equivalent) is persisted and returned in execution/step data where classification is required.
Automation route / DB bootstrap ordering is fixed so the page does not spuriously 404 when the PR exists.
Report-summary fetching is deferred or gated so the UI does not hammer 404s while artifacts are absent (or the API returns a non-error "not ready" contract).

[andyrvcom]

Summary • b29bea4
This diff re-tested flows affected by recent changes in checkout validation and form handling. Several issues were fixed, but new regressions were introduced in discount calculation and user input validation.

What changed

	Failing Issue	Status
	Cart discount calculation is incorrect
	User registration fails on valid input

Tests run by Ito

#	Result	Severity	Type	Description
1	❌	🟠 Medium	Edge	Out-of-range runner-control numeric payload values are accepted/ignored by the start path instead of being server-validated.
2	❌	🟥 High	Logic	Frontend sends runner controls, but backend start handling and orchestration ignore them, so run behavior cannot change.
3	❌	🟥 High	Logic	Callback requests accept errorCode, but execution output still surfaces no classification code for the failed step.
4	❌	🟥 High	Req-Test	Frontend sends runner-control fields, but backend start-route validation and orchestration do not accept or propagate them.
5	✅	—	Adversarial	Tampered orchestration payload values and unsupported keys were handled safely without unsafe orchestration behavior.
6	✅	—	Adversarial	In non-admin context, targeted reconciliation/report admin endpoints were denied with 403 and no reconciliation data was returned.
7	✅	—	Adversarial	Forged callback attempts were rejected with 401 Invalid callback token on modern and legacy routes; execution step state remained unchanged.
8	✅	—	Edge	Sequential/full-parallel requests with stale capped-mode maxParallel were handled without propagating stale maxParallel into run data.
9	✅	—	Edge	Legacy-cost-only step displayed Cost while Billed was omitted; page text contained no undefined/null leakage (local seeded data, non-prod bypass).
10	✅	—	Logic	Execution API returned 200 with full mixed steps array: billed compute parsed to typed fields; legacy-only step kept cost without billed data; malformed/null outputData produced compute=null while retaining steps.
11	✅	—	Spec Criteria	On run 91031 timeline, step cards displayed legacy Cost and Billed together, with billed value formatted and source label aws_cost_explorer (local non-prod bypass).
12	✅	—	Happy-path	Reconcile-by-run, date-window reconcile, and cloud-cost CSV endpoints returned HTTP 200 with expected JSON/CSV contract fields.
13	⚠️	🟥 High	Edge	Automation route renders not-found because backend DB connection falls back to localhost before env is loaded.
14	⚠️	🟠 Medium	Happy-path	UI repeatedly requests output report summaries before artifacts are available, causing repeated 404 console errors.

[cubic-dev-ai]

No issues found across 1 file

[andyrvcom]

Summary • b29bea4
This diff re-tested flows affected by recent changes in checkout validation and form handling. Several issues were fixed, but new regressions were introduced in discount calculation and user input validation.

What changed

	Failing Issue	Status
	Cart discount calculation is incorrect
	User registration fails on valid input

Tests run by Ito

#	Result	Severity	Type	Description
1	❌	🟠 Medium	Edge	Out-of-range runner-control numeric payload values are accepted/ignored by the start path instead of being server-validated.
2	❌	🟥 High	Logic	Frontend sends runner controls, but backend start handling and orchestration ignore them, so run behavior cannot change.
3	❌	🟥 High	Logic	Callback requests accept errorCode, but execution output still surfaces no classification code for the failed step.
4	❌	🟥 High	Req-Test	Frontend sends runner-control fields, but backend start-route validation and orchestration do not accept or propagate them.
5	✅	—	Adversarial	Tampered orchestration payload values and unsupported keys were handled safely without unsafe orchestration behavior.
6	✅	—	Adversarial	In non-admin context, targeted reconciliation/report admin endpoints were denied with 403 and no reconciliation data was returned.
7	✅	—	Adversarial	Forged callback attempts were rejected with 401 Invalid callback token on modern and legacy routes; execution step state remained unchanged.
8	✅	—	Edge	Sequential/full-parallel requests with stale capped-mode maxParallel were handled without propagating stale maxParallel into run data.
9	✅	—	Edge	Legacy-cost-only step displayed Cost while Billed was omitted; page text contained no undefined/null leakage (local seeded data, non-prod bypass).
10	✅	—	Logic	Execution API returned 200 with full mixed steps array: billed compute parsed to typed fields; legacy-only step kept cost without billed data; malformed/null outputData produced compute=null while retaining steps.
11	✅	—	Spec Criteria	On run 91031 timeline, step cards displayed legacy Cost and Billed together, with billed value formatted and source label aws_cost_explorer (local non-prod bypass).
12	✅	—	Happy-path	Reconcile-by-run, date-window reconcile, and cloud-cost CSV endpoints returned HTTP 200 with expected JSON/CSV contract fields.
13	⚠️	🟥 High	Edge	Automation route renders not-found because backend DB connection falls back to localhost before env is loaded.
14	⚠️	🟠 Medium	Happy-path	UI repeatedly requests output report summaries before artifacts are available, causing repeated 404 console errors.

[coderabbitai]

📝 Walkthrough

Walkthrough

The Dockerfile was simplified by removing the NODE_IMAGE_VERSION and BASE_PATH build argument declarations, eliminating the deps and builder multi-stage build stages, and deleting dependency installation steps using pnpm. The runner stage remains but still references the removed NODE_IMAGE_VERSION variable.

Changes

Cohort / File(s)	Summary
Dockerfile Build Stage Simplification Dockerfile	Removed multi-stage build setup including deps and builder stages, deleted ARG NODE_IMAGE_VERSION and ARG BASE_PATH declarations, removed pnpm dependency installation and node_modules copying. Note: runner stage still references undefined ${NODE_IMAGE_VERSION} variable.

Estimated code review effort

🎯 2 (Simple) | ⏱️ ~10 minutes

Poem

A rabbit hops through Docker's maze,
Removing stages, trimming haze,
Build layers gone, the path grows clear—
Yet one stray reference still lurks here! 🐰

🚥 Pre-merge checks | ✅ 2 | ❌ 1

❌ Failed checks (1 warning)

Check name	Status	Explanation	Resolution
Title check	⚠️ Warning	The title accurately describes the main change: removing multi-stage builds from the Dockerfile. However, the summary reveals a critical issue—the runner stage still references NODE_IMAGE_VERSION despite the ARG declaration being removed, which introduces a breaking change not reflected in the title.	Revise the title to reflect the breaking change, such as 'Remove multi-stage builds from Dockerfile (breaks NODE_IMAGE_VERSION)' or address the remaining reference to the removed ARG before merging.

✅ Passed checks (2 passed)

Check name	Status	Explanation
Docstring Coverage	✅ Passed	No functions found in the changed files to evaluate docstring coverage. Skipping docstring coverage check.
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.

_{✏️ Tip: You can configure your own custom pre-merge checks in the settings.}

✨ Finishing Touches

📝 Generate docstrings

• Create stacked PR
• Commit on current branch

🧪 Generate unit tests (beta)

• Create PR with unit tests
• Commit unit tests in branch andyrvcom-patch-2

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

[andyrvcom]

Tip

✅ All critical tests passed
This PR looks stable and ready for merge.

[andyrvcom]

Tip

✅ All critical tests passed
This PR looks stable and ready for merge.

[andyrvcom]

Important

🔍 Diff run summary
3 issues fixed
2 new failures introduced
5 tests unchanged

[andyrvcom]

[!івіві]
🔍 Diff run summary
3 issues fixed
2 new failures introduced
5 tests unchanged

[coderabbitai]

Caution

Some comments are outside the diff and can’t be posted inline due to platform limitations.

⚠️ Outside diff range comments (4)

Dockerfile (4)

1-10: ⚠️ Potential issue | 🔴 Critical

Critical: Missing FROM instruction and build stage context.

The removal of the multi-stage build has left RUN npm run build-docker (line 10) and ENV BASE_PATH=$BASE_PATH (line 6) orphaned without a preceding FROM instruction. A Dockerfile must have a FROM instruction before any RUN, ENV, or similar commands.

Additionally, $BASE_PATH references an ARG that was removed, so it will resolve to an empty string.

This will cause the Docker build to fail immediately.

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@Dockerfile` around lines 1 - 10, The Dockerfile is missing a FROM instruction
and the ARG for BASE_PATH that ENV BASE_PATH and RUN npm run build-docker rely
on; restore a proper build stage (or single-stage) by adding a FROM line (e.g.,
a node base image or the original multi-stage build entry) before any ENV/RUN,
reintroduce ARG BASE_PATH (or set a default value) before ENV BASE_PATH so it
expands correctly, and ensure the build stage that RUN npm run build-docker
targets exists (or convert the command to the appropriate stage) so the Docker
build no longer fails.

---

13-13: ⚠️ Potential issue | 🔴 Critical

Critical: Undefined NODE_IMAGE_VERSION variable.

The FROM node:${NODE_IMAGE_VERSION} instruction references the build argument NODE_IMAGE_VERSION, but the declaration ARG NODE_IMAGE_VERSION="22-alpine" was removed. This will cause the variable to be empty, resulting in an invalid image reference node: and a build failure.

Proposed fix to restore the ARG declaration

Add at the top of the file (before any FROM):

ARG NODE_IMAGE_VERSION="22-alpine"

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@Dockerfile` at line 13, The Dockerfile references the build arg
NODE_IMAGE_VERSION in the line "FROM node:${NODE_IMAGE_VERSION} AS runner" but
the ARG declaration was removed; restore the argument by adding an ARG
NODE_IMAGE_VERSION declaration before any FROM so the variable is defined (e.g.,
default "22-alpine") to ensure FROM node:${NODE_IMAGE_VERSION} resolves
correctly.

---

1-51: ⚠️ Potential issue | 🔴 Critical

The entire Dockerfile is non-functional after this change.

Removing the multi-stage build without providing alternative mechanisms breaks the entire build process. The PR description says "test" and the comments indicate "Critical issues detected" — this change should not be merged.

To fix, either:

1. Revert the removal of the deps and builder stages, or
2. Completely restructure the Dockerfile to a single-stage build (which would require significant changes to how dependencies are installed, how the build runs, and how artifacts are copied).

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@Dockerfile` around lines 1 - 51, The Dockerfile broke because the multi-stage
build stages (e.g., the removed deps and builder stages referenced by COPY
--from=builder and the build step RUN npm run build-docker) were removed;
restore the original multi-stage flow (reintroduce the deps and builder stages
that install dependencies and run the build so /app/.next/standalone and other
artifacts exist) or else convert to a correct single-stage build by moving
dependency installation (pnpm/pnpm install), build step (npm run build-docker),
and artifact generation into the final stage and updating all COPY
--from=builder references to local paths; ensure the builder stage creates
/app/.next/standalone, /app/public, /app/prisma, /app/scripts and /app/generated
before the runner stage tries to copy them (reference RUN npm run build-docker,
COPY --from=builder, and pnpm install/pnpm --allow-build commands to locate the
spots to fix).

---

34-42: ⚠️ Potential issue | 🔴 Critical

Critical: References to non-existent builder stage.

All COPY --from=builder instructions reference a build stage named builder that was removed from this Dockerfile. This will cause the Docker build to fail with an error like "invalid from flag value builder: not found".

The builder stage was responsible for:

• Installing dependencies via pnpm
• Running the build process
• Producing the build artifacts (/app/public, /app/prisma, /app/.next/standalone, etc.)

Without restoring the multi-stage build or providing an alternative source for these artifacts, this Dockerfile cannot produce a working image.

🤖 Prompt for AI Agents

Verify each finding against the current code and only fix it if needed.

In `@Dockerfile` around lines 34 - 42, The Dockerfile contains multiple COPY
--from=builder references but the multi-stage build stage named "builder" was
removed; restore a build stage named "builder" (or rename the COPYs to the
actual build stage name) that performs dependency installation (pnpm), runs the
Next.js build, and outputs the artifacts at /app/public, /app/prisma,
/app/scripts, /app/generated, /app/.next/standalone and /app/.next/static so the
existing COPY --from=builder lines succeed (or alternatively change each COPY
--from=builder to reference the correct existing stage name that produces those
same paths).

🤖 Prompt for all review comments with AI agents

Verify each finding against the current code and only fix it if needed.

Outside diff comments:
In `@Dockerfile`:
- Around line 1-10: The Dockerfile is missing a FROM instruction and the ARG for
BASE_PATH that ENV BASE_PATH and RUN npm run build-docker rely on; restore a
proper build stage (or single-stage) by adding a FROM line (e.g., a node base
image or the original multi-stage build entry) before any ENV/RUN, reintroduce
ARG BASE_PATH (or set a default value) before ENV BASE_PATH so it expands
correctly, and ensure the build stage that RUN npm run build-docker targets
exists (or convert the command to the appropriate stage) so the Docker build no
longer fails.
- Line 13: The Dockerfile references the build arg NODE_IMAGE_VERSION in the
line "FROM node:${NODE_IMAGE_VERSION} AS runner" but the ARG declaration was
removed; restore the argument by adding an ARG NODE_IMAGE_VERSION declaration
before any FROM so the variable is defined (e.g., default "22-alpine") to ensure
FROM node:${NODE_IMAGE_VERSION} resolves correctly.
- Around line 1-51: The Dockerfile broke because the multi-stage build stages
(e.g., the removed deps and builder stages referenced by COPY --from=builder and
the build step RUN npm run build-docker) were removed; restore the original
multi-stage flow (reintroduce the deps and builder stages that install
dependencies and run the build so /app/.next/standalone and other artifacts
exist) or else convert to a correct single-stage build by moving dependency
installation (pnpm/pnpm install), build step (npm run build-docker), and
artifact generation into the final stage and updating all COPY --from=builder
references to local paths; ensure the builder stage creates
/app/.next/standalone, /app/public, /app/prisma, /app/scripts and /app/generated
before the runner stage tries to copy them (reference RUN npm run build-docker,
COPY --from=builder, and pnpm install/pnpm --allow-build commands to locate the
spots to fix).
- Around line 34-42: The Dockerfile contains multiple COPY --from=builder
references but the multi-stage build stage named "builder" was removed; restore
a build stage named "builder" (or rename the COPYs to the actual build stage
name) that performs dependency installation (pnpm), runs the Next.js build, and
outputs the artifacts at /app/public, /app/prisma, /app/scripts, /app/generated,
/app/.next/standalone and /app/.next/static so the existing COPY --from=builder
lines succeed (or alternatively change each COPY --from=builder to reference the
correct existing stage name that produces those same paths).

---

ℹ️ Review info

⚙️ Run configuration

Configuration used: defaults

Review profile: CHILL

Plan: Pro

Run ID: 5b92d294-5f61-41bd-a5e0-af91a26d5456

📥 Commits

Reviewing files that changed from the base of the PR and between f4d039e and 9d8d458.

📒 Files selected for processing (1)

• Dockerfile

[andyrvcom]

[!IMPORTANT=вава]
🔍 Diff run summary
3 issues fixed
2 new failures introduced
5 tests unchanged

[andyrvcom]

Tip

💡 Improve test coverage
Add environment variables and test data to increase detection accuracy.

[andyrvcom]

Note

🧩 Missing test context
Some flows couldn’t be fully tested due to missing credentials or setup.

[andyrvcom]

[andyrvcom]

Summary • b29bea4
This diff re-tested flows affected by recent changes in checkout validation and form handling. Several issues were fixed, but new regressions were introduced in discount calculation and user input validation.

What changed

	Failing Issue	Status
	Cart discount calculation is incorrect
	User registration fails on valid input

Tests run by Ito

#	Result	Severity	Type	Description
1	❌	🟠 Medium	Edge	Out-of-range runner-control numeric payload values are accepted/ignored by the start path instead of being server-validated.
2	❌	🟥 High	Logic	Frontend sends runner controls, but backend start handling and orchestration ignore them, so run behavior cannot change.
3	❌	🟥 High	Logic	Callback requests accept errorCode, but execution output still surfaces no classification code for the failed step.
4	❌	🟥 High	Req-Test	Frontend sends runner-control fields, but backend start-route validation and orchestration do not accept or propagate them.
5	✅	—	Adversarial	Tampered orchestration payload values and unsupported keys were handled safely without unsafe orchestration behavior.
6	✅	—	Adversarial	In non-admin context, targeted reconciliation/report admin endpoints were denied with 403 and no reconciliation data was returned.
7	✅	—	Adversarial	Forged callback attempts were rejected with 401 Invalid callback token on modern and legacy routes; execution step state remained unchanged.
8	✅	—	Edge	Sequential/full-parallel requests with stale capped-mode maxParallel were handled without propagating stale maxParallel into run data.
9	✅	—	Edge	Legacy-cost-only step displayed Cost while Billed was omitted; page text contained no undefined/null leakage (local seeded data, non-prod bypass).
10	✅	—	Logic	Execution API returned 200 with full mixed steps array: billed compute parsed to typed fields; legacy-only step kept cost without billed data; malformed/null outputData produced compute=null while retaining steps.
11	✅	—	Spec Criteria	On run 91031 timeline, step cards displayed legacy Cost and Billed together, with billed value formatted and source label aws_cost_explorer (local non-prod bypass).
12	✅	—	Happy-path	Reconcile-by-run, date-window reconcile, and cloud-cost CSV endpoints returned HTTP 200 with expected JSON/CSV contract fields.
13	⚠️	🟥 High	Edge	Automation route renders not-found because backend DB connection falls back to localhost before env is loaded.
14	⚠️	🟠 Medium	Happy-path	UI repeatedly requests output report summaries before artifacts are available, causing repeated 404 console errors.

[andyrvcom]

Commit b29bea4
👉 14 test cases ran
❌ 4 failed
✅ 8 passed
⚠️ 2 additional findings

Summary • b29bea4
This diff re-tested flows affected by recent changes in checkout validation and form handling. Several issues were fixed, but new regressions were introduced in discount calculation and user input validation.

What changed

	Failing Issue	Status
	Cart discount calculation is incorrect
	User registration fails on valid input

Tests run by Ito

#	Result	Severity	Type	Description
1	❌	🟠 Medium	Edge	Out-of-range runner-control numeric payload values are accepted/ignored by the start path instead of being server-validated.
2	❌	🟥 High	Logic	Frontend sends runner controls, but backend start handling and orchestration ignore them, so run behavior cannot change.
3	❌	🟥 High	Logic	Callback requests accept errorCode, but execution output still surfaces no classification code for the failed step.
4	❌	🟥 High	Req-Test	Frontend sends runner-control fields, but backend start-route validation and orchestration do not accept or propagate them.
5	✅	—	Adversarial	Tampered orchestration payload values and unsupported keys were handled safely without unsafe orchestration behavior.
6	✅	—	Adversarial	In non-admin context, targeted reconciliation/report admin endpoints were denied with 403 and no reconciliation data was returned.
7	✅	—	Adversarial	Forged callback attempts were rejected with 401 Invalid callback token on modern and legacy routes; execution step state remained unchanged.
8	✅	—	Edge	Sequential/full-parallel requests with stale capped-mode maxParallel were handled without propagating stale maxParallel into run data.
9	✅	—	Edge	Legacy-cost-only step displayed Cost while Billed was omitted; page text contained no undefined/null leakage (local seeded data, non-prod bypass).
10	✅	—	Logic	Execution API returned 200 with full mixed steps array: billed compute parsed to typed fields; legacy-only step kept cost without billed data; malformed/null outputData produced compute=null while retaining steps.
11	✅	—	Spec Criteria	On run 91031 timeline, step cards displayed legacy Cost and Billed together, with billed value formatted and source label aws_cost_explorer (local non-prod bypass).
12	✅	—	Happy-path	Reconcile-by-run, date-window reconcile, and cloud-cost CSV endpoints returned HTTP 200 with expected JSON/CSV contract fields.
13	⚠️	🟥 High	Edge	Automation route renders not-found because backend DB connection falls back to localhost before env is loaded.
14	⚠️	🟠 Medium	Happy-path	UI repeatedly requests output report summaries before artifacts are available, causing repeated 404 console errors.

[andyrvcom]

sds