Continuum carbon-fiber truss homogenization, area-grading optimality, and specific-rigidity limits on the bridged cross-polytope (incentre-lattices) framework.
Part of Foundation-0, extending the unit-spring rigidity theory of Foundation-0/incentre-lattices (results/rigidity-nd/PROOF.md) to physical axial carbon-fiber reinforced polymer (CFRP) struts, area-graded tow allocations,
When the abstract unit springs (k = 1) of the
Every claim is labelled strictly per the Foundation-0 repository standard (PROVEN = written proof + symbolic check; VERIFIED = deterministic numerical check with must-fail controls; KNOWN = cited literature/datasheet):
| Result | Key Formula / Value | Label | Check |
|---|---|---|---|
| Continuum-bar moduli |
|
PROVEN (VERIFIED ( |
python3 verify.py |
| Equal-area relaxation penalty | At |
PROVEN & VERIFIED
|
python3 verify.py |
| Universal bulk-modulus saturation | Area ratio |
PROVEN (VERIFIED ( |
python3 verify.py |
| Uniaxial |
Interior optimum |
PROVEN & VERIFIED
|
python3 verify.py |
| Octagonal-pore |
12 non-intersecting pore chords/cell (exact length |
VERIFIED |
python3 verify.py |
| Same-material bound check (honest limit) | No pin-jointed truss beats the closed-cell plate Hashin–Shtrikman (HS) bound of the same solid ( |
PROVEN / KNOWN
|
Must-fail #3 & #4 |
| CFRP specific-rigidity vs. metal HS bounds | At |
VERIFIED |
python3 verify.py |
| Tensile vs. Euler buckling transition | Solid T1100G rods buckle below $\bar{\rho}{\text{crit}} = 4.00%$; hollow tubes ($\eta = 0.80$) give $4.56\times$ gain ($\bar{\rho}{\text{crit}} = 0.88%$, and |
PROVEN & VERIFIED
|
python3 verify.py |
Fiber properties are loaded from data/carbon_fibers.json using official Torayca Carbon Fiber (T300, Technical Manual, T1100G) and Mitsubishi DIALEAD Pitch Fiber (K13D2U Datasheet) specifications:
| Material / Architecture |
|
|
Graded |
Isotropic |
Graded |
Hollow Tube |
|---|---|---|---|---|---|---|
| Al 6061-T6 (HS Plate Upper Bound) | 68.9 | 0.1350 | — | 13.08 | 8.75 | — |
| Ti-6Al-4V (HS Plate Upper Bound) | 113.8 | 0.2215 | — | 13.18 | 8.95 | — |
| AISI 4340 Steel (HS Plate Upper Bound) | 205.0 | 0.3925 | — | 13.36 | 8.43 | — |
|
Torayca T300 CFRP ( |
139.4 | 0.0768 | 13.93 | 11.62 | 10.08 | 0.62% |
|
Torayca T700S CFRP ( |
139.4 | 0.0780 | 13.72 | 11.44 | 9.93 | 0.87% |
|
Torayca T1100G CFRP ( |
195.8 | 0.0777 | 19.34 | 16.13 | 14.00 | 0.88% |
|
Torayca M55J CFRP ( |
325.4 | 0.0813 | 30.72 | 25.63 | 22.24 | 0.30% |
|
Mitsubishi K13D2U CFRP ( |
562.4 | 0.0900 | 47.96 | 40.01 | 34.72 | 0.16% |
-
PROOF.md— Full mathematical derivations, scope boundaries, and prior-art citations. -
data/carbon_fibers.json— Primary-sourced fiber and reference alloy properties with SHA-256 integrity check. -
verify.py— Deterministic checker (sympysymbolic proofs for$n=2..7$ ,numpy60-case coordinate-space Schur-complement truss homogenizer, CFRP/HS benchmarks, and 6 must-fail falsification controls). -
results/certificate.json— Committed machine-verifiable output certificate.
python3 -m pip install numpy sympy
python3 verify.pypython3 verify.py recomputes every symbolic and numerical result from scratch, executes all 6 must-fail controls, and fails if any value differs from results/certificate.json.
-
Finite-joint overlap & Timoshenko beam bending (
task): Add rigid/bonded CFRP node bending stiffness ($EI/L^3$ ) to quantify$\bar{\rho}^2$ shear scaling without diagonal ties and correct solid volume fraction for joint-collar overlaps above$\bar{\rho} > 0.10$ . -
Pre-tensioned unilateral cable mechanics (
task): Formulate exact pre-strain bounds$\varepsilon_0 \in (0, \varepsilon_{\text{ult}})$ on the 12 octagonal-pore carbon-fiber filaments so compression struts remain below Euler/kink-band limits while tension ties stay taut under arbitrary multiaxial shear. -
Folding-to-locked CFRP deployment (
task): Couple the continuousm = 1folding path of Foundation-0/incentre-lattices with snap-taut carbon-fiber tension cables that lock at target deployment angle.
Follow Foundation-0/f0's JOIN.md and CONTRIBUTING.md:
- Open one pull request per result, disclose AI assistance and the model used, and name the person signing for the work.
- Never edit
verify.pyto weaken a check alongside a claimed result; include must-fail controls for new verifiers. - Label every claim honestly (
PROVEN,VERIFIED,KNOWN, orCONJECTURE), and never call "not found" "new".
- Maintainer & Human Sign-Off: Shahid Arifuddin (
@abu-aska) - Foundational Framework (
incentre-lattices): Ahraz Arifuddin (@ahrazzle) - AI Assistance: Prepared by Google Gemini (autonomous research & verification agent) working for Shahid Arifuddin (
@abu-aska), following Foundation-0 principles 0.2–0.6. test for superior rigidity limits.