Skip to content
Merged
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
174 changes: 174 additions & 0 deletions arch/arm64/boot/dts/apple/t6050-j714s.dts
Original file line number Diff line number Diff line change
Expand Up @@ -47,6 +47,180 @@
#define T6050_J714S
#include "t6050-peripherals.dtsi"

/*
* Type-C, from the ADT:
* ATC0 usb-drd0 left-back hpm0 nub-spmi-a0 0x0c (the debug port, not described)
* ATC1 usb-drd1 left-front hpm1 nub-spmi-a0 0x0a
* ATC2 usb-drd2 right hpm2 nub-spmi-a1 0x0c
* hpm5 nub-spmi-a0 0x08 (MagSafe, not a USB-C connector)
* There is no usb-drd3 and no nub-spmi-a2, so ATC3's USB chain and that bus stay
* off. Both described ports are wired as on J716s.
*/
&atc3_phy_mbox {
status = "disabled";
};

&atc3_phy {
status = "disabled";
};

&usb_drd3 {
status = "disabled";
};

&usb_drd3_dart_0 {
status = "disabled";
};

&usb_drd3_dart_1 {
status = "disabled";
};

&nub_spmi_a2 {
status = "disabled";
};

/* Left-front port (ATC1): the SN201202x hpm1 and the connector graph */
&nub_spmi_a0 {
hpm1: usb-pd@a {
compatible = "apple,sn201202x";
reg = <0xa SPMI_USID>;

typec1: connector {
compatible = "usb-c-connector";
label = "USB-C Left-front";
power-role = "dual";
data-role = "dual";

ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
typec1_hs: endpoint {
remote-endpoint = <&usb_drd1_hs>;
};
};

port@1 {
reg = <1>;
typec1_ss: endpoint {
remote-endpoint = <&atc1_phy_typec>;
};
};
};
};
};
};

&usb_drd1 {
port {
usb_drd1_hs: endpoint {
remote-endpoint = <&typec1_hs>;
};
};
};

&atc1_phy {
port {
atc1_phy_typec: endpoint {
remote-endpoint = <&typec1_ss>;
};
};
};

/*
* Right port (ATC2): hpm2 on nub-spmi-a1, USB only (dcpext0's DisplayPort route
* through ATC2 stays off). The inventory's nub-spmi-a1 has the generation 4 bus's
* three register windows and IRQ (ADT nub-spmi-a1); the driver polls it and
* refuses an interrupt, so it takes the first window only, as on J716s.
*/
&nub_spmi_a1 {
reg = <0x2 0x8a1a8000 0x0 0x4000>;
/delete-property/ interrupts;
status = "okay";

hpm2: usb-pd@c {
compatible = "apple,sn201202x";
reg = <0xc SPMI_USID>;

typec2: connector {
compatible = "usb-c-connector";
label = "USB-C Right";
power-role = "dual";
data-role = "dual";

ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
typec2_hs: endpoint {
remote-endpoint = <&usb_drd2_hs>;
};
};

port@1 {
reg = <1>;
typec2_ss: endpoint {
remote-endpoint = <&atc2_phy_typec>;
};
};
};
};
};
};

&ps_atc2_common {
status = "okay";
};

&ps_atc2_usb_aon {
status = "okay";
};

&ps_atc2_phymxwrap {
status = "okay";
};

&ps_atc2_usb {
status = "okay";
};

&atc2_phy_mbox {
status = "okay";
};

&atc2_phy {
status = "okay";

port {
atc2_phy_typec: endpoint {
remote-endpoint = <&typec2_ss>;
};
};
};

&usb_drd2 {
status = "okay";

port {
usb_drd2_hs: endpoint {
remote-endpoint = <&typec2_hs>;
};
};
};

&usb_drd2_dart_0 {
status = "okay";
};

&usb_drd2_dart_1 {
status = "okay";
};

/*
* The PMP (ADT pmp0, /chosen, /arm-io/pmgr). iBoot loads its firmware and the driver starts it
* with these boot arguments and the firmware properties below. Its report tells it which devices
Expand Down
Loading