Skip to content

arm64: dts: apple: t8132-j713-j715: give the J715 the J713's sleep, enclave and display power wiring - #2245

Draft
RyanTheTide wants to merge 2 commits into
integration/aurorafrom
spec-m3m4/j715-shared-j713-wiring
Draft

RyanTheTide wants to merge 2 commits into
integration/aurorafrom
spec-m3m4/j715-shared-j713-wiring

Conversation

@RyanTheTide

@RyanTheTide RyanTheTide commented Nov 19, 2026 •

Copy link
Copy Markdown
Contributor

Stacked on #2244 (same lines of t8132-j713.dts); merge that first.

Problem. The J715 (MacBook Air 15", M4) is the J713 board with a bigger panel and more amps, but its DT lacked the J713's deep-sleep controller, both cluster power gates, the SEP (which Touch ID needs; the J715 already enables the fingerprint sensor), DCP and external-DCP power gating, the DCP/USB4 DART clock-protection slices, the radio port CLKREQ and the ACIO PHY links. All of that sat in t8132-j713.dts with "tested on this machine only" as the reason.

Change. Move those blocks unchanged into the shared t8132-j713-j715.dtsi. Board-specific parts (radio island, ATC PHY trims, panel, amps) stay in the board files.

Testing. cpp + dtc on all six T8132 boards: same warning counts. J713's sorted decompile is byte-identical before and after.

Still to run. On a J715: boot, Touch ID enroll and match, s2r with and without a dock.

Assisted-by: LLM (Claude:Opus 5.5)

RyanTheTide and others added 2 commits November 19, 2026 22:14
Every T8132 has the ANE; the DT enabled it, with its three DARTs, on the
J713 only, the board it was first run on (#1952). The node's resources
and power domains are the SoC's, and the driver binds only when the
loader hands off the firmware preload (aura#260 does so for any
apple,t8132-ane node), so enable it in the SoC file and drop the J713
copy. The J713's DT is unchanged.

Not tested on the J604, J715, J623/J624 or J773g (desk audit, lane
SPEC-M3M4).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…nclave and display power wiring

The J715 (MacBook Air 15", M4) is the J713 board with a larger panel and
six amps; its ADT matches the J713's apart from the radio island and the
ATC PHY trims (t8132-j715.dts). Yet the deep-sleep controller, both
cluster power gates, the SEP (which Touch ID's match path needs, and the
J715 DT already enables the Mesa sensor), the DCP and external-DCP
power gating, the USB4/DCP DART clock-protection slices, the radio
port's CLKREQ and the ACIO PHY links sat in t8132-j713.dts only, with
"tested on this machine only" as the reason.

Move them unchanged into the shared J713/J715 file. The J713 DT compiles
to the same tree (dtc -s output identical before and after).

Not tested on a J715: needs a J715 boot,
Touch ID enroll, and an s2r cycle with and without a dock.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant