Adaptive Cover

This Custom-Integration provides sensors for vertical and horizontal blinds based on the sun's position by calculating the position to filter out direct sunlight.

This integration builds upon the template sensor from this forum post Automatic Blinds

Adaptive Cover

Features

Individual service devices for vertical, horizontal and tilted covers
Three strategy modes: basic, climate, security
Binary Sensor to track when the sun is in front of the window
Sensors for start and end time
Auto manual override detection
Climate Mode
- Weather condition based operation
- Presence based operation
- Switch to toggle climate mode
- Sensor for displaying the operation modus (winter, intermediate, summer)
- Diagnostic sensor exposing all intermediate climate decision values
Security Mode (v1.9+)
- Automatically closes covers when nobody is home
- Per-group switch (visible only when a presence entity is configured)
- Hub switch for global activation across all groups
- Manual override always wins — covers in manual control are never moved
- Automatic return to adaptive positioning when presence is restored
- Fail-safe: unavailable presence sensor → security stays inactive
Adaptive Control
- Turn control on/off
- Control multiple covers
- Set start time to prevent opening blinds while you are asleep
- Set minimum interval time between position changes
- Set minimum percentage change
All Blinds hub device (v1.8+)
- Single aggregate cover entity controlling every blind at once
- 4-state control select (Auto / Off / All open / All closed)
- ON/OFF switch for Alexa voice control ("Alexa, turn on / turn off the blinds")
- Security switch for Alexa ("Alexa, activate blind security")
- Scene shortcuts for automations
- Native Alexa, Google Assistant and Assist support

Installation

HACS (Recommended)

Add https://github.com/kamahat/adaptive-cover as custom repository to HACS. Search and download Adaptive Cover within HACS.

Restart Home-Assistant and add the integration.

Manual

Download the adaptive_cover folder from this github. Add the folder to config/custom_components/.

Restart Home-Assistant and add the integration.

Setup

Adaptive Cover supports (for now) three types of covers/blinds; Vertical and Horizontal and Venetian (Tilted) blinds. Each type has its own specific parameters to setup a sensor. To setup the sensor you first need to find out the azimuth of the window(s). This can be done by finding your location on Open Street Map Compass.

When adding the integration for the first time, a menu is shown:

Add a cover group — configure a Vertical, Horizontal or Tilt blind group (one per window or room).
Add 'All Blinds' aggregator — creates the singleton hub device that controls all groups at once. Created automatically on first setup if not yet present.

Cover Types

	Vertical	Horizontal	Tilted

Movement	Up/Down	In/Out	Tilting
	variables	variables	variables

Modes

This component supports three strategy modes: a basic mode, a climate (comfort/energy saving) mode that works with presence and temperature detection, and a security mode that closes covers when nobody is home.

Mode	Priority	Description
`basic`	3 (base)	Pure sun-position tracking
`climate`	2	Adapts to temperature — summer / winter / intermediate
`security`	1 (highest)	Closes covers on absence — overrides all other logic including outside the time window

flowchart TD
    START(["☀️ Sun data update"])

    START --> CTRL{"Toggle Control\nswitch ON?"}
    CTRL -- No --> DEFAULT["↩️ Return default\nposition"]

    CTRL -- Yes --> SECURITY{"🛡️ Security mode\nON + no presence?"}
    SECURITY -- "Yes\n(absent)" --> SECPOS["🛡️ Security position\n0% or min_position\n(0% if no climate\nor summer branch)"]
    SECURITY -- No --> TIME{"Within active\ntime window?"}
    TIME -- No --> SUNSET["🌙 Return sunset /\ndefault position"]

    TIME -- Yes --> MANUAL{"Manual override\nactive?"}
    MANUAL -- Yes --> HOLD["🔒 Hold current\nposition"]

    MANUAL -- No --> SUN{"Sun in field of view\nAND elevation > 0?"}
    SUN -- No --> DEFAULT

    SUN -- Yes --> CLMODE{"Climate\nMode?"}

    %% ── BASIC MODE ────────────────────────────────
    CLMODE -- No --> CALC["📐 Calculate optimal\nposition from sun geometry"]
    CALC --> LIMITS

    %% ── CLIMATE MODE ──────────────────────────────
    CLMODE -- Yes --> PRES{"Presence\ndetected?"}
    PRES -- "No" --> PNONE["min_position or 0%"]

    PRES -- "Yes" --> WCHECK{"❄️ WINTER?\ntemp_winter < temp_low\ntemp_winter = inside preferred\n              outside as fallback"}
    WCHECK -- Yes --> OPEN["🪟 Open fully (100%)\nsolar gain"]

    WCHECK -- No --> SCHECK{"🌡️ SUMMER?\ntemp_summer > temp_high\nAND outside_high\ntemp_summer = outside if temp_switch=ON\n              else inside\noutside_high = outside > temp_summer_outside\n              (True if not configured)"}
    SCHECK -- Yes --> TRANSP{"Transparent / perforated blind?\n(filters only —\ncannot fully block heat)"}
    TRANSP -- "Yes\n(filter only)" --> CALC
    TRANSP -- "No\n(opaque)" --> CLOSE["🪟 Close fully (0%)\nblock heat"]

    SCHECK -- "No\n(intermediate)" --> LIGHT{"Not sunny? — OR of 3 conditions\n① lux ≤ threshold  (if switch ON + entity set)\n② irradiance ≤ threshold  (if switch ON + entity set)\n③ weather state not in sunny list\nAbsent/OFF sensor = neutral"}
    LIGHT -- "Yes\n(at least one true)" --> DEFAULT
    LIGHT -- "No\n(all false → sunny)" --> CALC

    %% ── COMMON FINAL STEPS ────────────────────────
    LIMITS["🔧 Apply min / max position limits\n+ blind spot correction\n+ delta position check"]
    OPEN --> LIMITS
    CLOSE --> LIMITS
    PNONE --> LIMITS
    SECPOS --> LIMITS

    LIMITS --> RESULT(["✅ Apply new position\nto cover(s)"])

    %% ── STYLES ────────────────────────────────────
    style CLOSE   fill:#f28b82,color:#000
    style OPEN    fill:#81c995,color:#000
    style CALC    fill:#78b7f5,color:#000
    style RESULT  fill:#34a853,color:#fff
    style HOLD    fill:#fbbc04,color:#000
    style SUNSET  fill:#aecbfa,color:#000
    style DEFAULT fill:#e8eaed,color:#000
    style SECURITY fill:#ff9800,color:#fff,stroke:#e65100
    style SECPOS   fill:#ff9800,color:#fff,stroke:#e65100
    style PNONE    fill:#e8eaed,color:#000
    style LIGHT    fill:#8e44ad,color:#fff,stroke:#6c3483
    style WCHECK  fill:#1a5276,color:#fff
    style SCHECK  fill:#922b21,color:#fff

Execution priority: Security (1) > Climate (2) > Basic (3). Security is evaluated before the time window check.

Climate classification — three mutually exclusive branches (temp_low < temp_high by design):

Branch Condition Temp reference

WINTER temp_winter < temp_low inside preferred, outside fallback — always

SUMMER temp_summer > temp_high AND outside_high outside if temp_switch=ON, else inside

INTERMEDIATE neither WINTER nor SUMMER —

Why the asymmetry? WINTER checks indoor comfort. SUMMER optionally uses outdoor temp (temp_switch=ON) to confirm genuine heat outside. WINTER wins in the edge case where both conditions are true simultaneously (only possible when temp_switch=ON).

Basic mode

This mode uses the calculated position when the sun is within the specified azimuth range of the window. Else it defaults to the default value or after sunset value depending on the time of day.

Climate mode

This mode calculates the position based on extra parameters for presence, indoor temperature, minimal comfort temperature, maximum comfort temperature and weather (optional).

Climate strategies

No Presence: Returns min_position (or 0% if not configured). No temperature calculation needed.
Presence (or no Presence Entity set):
- Winter (temp_winter < temp_low): Opens fully (100%) to capture solar heat.
  - temp_winter = indoor temperature (outdoor as fallback if indoor not configured).
- Summer (temp_summer > temp_high AND outside_high): Closes or shades.
  - temp_summer = outdoor temperature if temp_switch=ON, else indoor.
  - outside_high = extra guard: outdoor > temp_summer_outside threshold (True by default if not set).
  - Transparent/perforated blind → calculate position (filtering only)
  - Opaque blind → close fully (0%)
- Intermediate: "not sunny?" is an OR of three independent sources:
  - lux ≤ threshold / irradiance ≤ threshold (only if switch ON and entity configured)
  - weather state not in sunny list
  - One source true → default position. All false → adaptive calculation.
For tilted blinds above summer threshold: slats positioned at 45° (found optimal).

Security mode

Security mode closes covers automatically when nobody is home, regardless of the current climate branch and regardless of the configured time window.

Requires a presence entity to be configured in the entry options. Without one, the switch exists but has no effect.

Situation	Target position
No climate mode	0% (fully closed)
Climate mode + `summer` branch	0% (fully closed)
Climate mode + `winter` or `intermediate`	`min_position` (or 0% if unset)

Key behaviours:

Manual override always wins — covers already in manual control are never moved by security
Automatic return — when presence is restored, adaptive positioning resumes without manual action
Fail-safe — unavailable presence sensor → security inactive
Outside time window — security applies even outside the configured start/end hours

Variables

Common

Variables	Default	Range	Description
Entities	[]		Denotes entities controllable by the integration
Window Azimuth	180	0-359	The compass direction of the window, discoverable via Open Street Map Compass
Default Position	60	0-100	Initial position of the cover in the absence of sunlight glare detection
Minimal Position	100	0-99	Minimal opening position for the cover — also used by security mode in winter/intermediate
Maximum Position	100	1-100	Maximum opening position for the cover
Field of view Left	90	1-90	Unobstructed viewing angle from window center to the left, in degrees
Field of view Right	90	1-90	Unobstructed viewing angle from window center to the right, in degrees
Minimal Elevation	None	0-90	Minimal elevation degree of the sun to be considered
Maximum Elevation	None	1-90	Maximum elevation degree of the sun to be considered
Default position after Sunset	0	0-100	Cover's default position from sunset to sunrise
Offset Sunset time	0		Additional minutes before/after sunset
Offset Sunrise time	0		Additional minutes before/after sunrise
Inverse State	False		Calculates inverse state for covers fully closed at 100%

Vertical

Variables	Default	Range	Description
Window Height	2.1	0.1-6	Length of fully extended cover/window
Glare Zone	0.5	0.1-2	Objects within this distance of the cover receive direct sunlight

Horizontal

Variables	Default	Range	Description
Awning Height	2	0.1-6	Height from work area to awning mounting point
Awning Length (horizontal)	2.1	0.3-6	Length of the awning when fully extended
Awning Angle	0	0-45	Angle of the awning from the wall
Glare Zone	0.5	0.1-2	Objects within this distance of the cover receive direct sunlight

Tilt

Variables	Default	Range	Description
Slat Depth	3	0.1-15	Width of each slat
Slat Distance	2	0.1-15	Vertical distance between two slats in horizontal position
Tilt Mode	Bi-directional		`mode1`: single direction 0°–90° / `mode2`: bi-directional 0°–180°

Automation

Variables	Default	Range	Description
Minimum Delta Position	1	1-90	Minimum position change required before another change can occur
Minimum Delta Time	2		Minimum time gap between position changes (minutes)
Start Time	`"00:00:00"`		Earliest time a cover can be adjusted after midnight
Start Time Entity	None		Overrides `start_time` if set
Manual Override Duration	`15 min`		Minimum duration for manual control status to remain active
Manual Override reset Timer	False		Resets duration timer each time the position changes while the manual control status is active
Manual Override Threshold	None	1-99	Minimal position change to be recognized as manual change
Manual Override ignore intermediate states	False		Ignore StateChangedEvents that have state `opening` or `closing`
End Time	`"00:00:00"`		Latest time a cover can be adjusted each day
End Time Entity	None		Overrides `end_time` if set
Adjust at end time	`False`		Make sure to always update the position to the default setting at the end time

Climate

Variables	Default	Range	Example	Description
Indoor Temperature Entity	`None`		`climate.living_room` \| `sensor.indoor_temp`	Used for WINTER check; fallback for SUMMER when `temp_switch=OFF`
Minimum Comfort Temperature	21	0-86		WINTER threshold — below this, open 100% for solar gain
Maximum Comfort Temperature	25	0-86		SUMMER threshold — above this, close 0% to block heat
Outdoor Temperature Entity	`None`		`sensor.outdoor_temp`	Used for SUMMER when `temp_switch=ON`; optional WINTER fallback
Outdoor Temperature Threshold	`None`			Extra SUMMER guard: activates only when outdoor temp also exceeds this. Inactive when not set.
Use Outside Temperature (`temp_switch`)	`False`			`ON` → outdoor temp primary for SUMMER check. WINTER always uses indoor.
Presence Entity	`None`			Used for both climate mode AND security mode
Weather Entity	`None`		`weather.home`	Temperature source when no sensor; also drives "not sunny" check
Weather Condition	`None`			States considered "sunny" — state not in list → contributes "not sunny" (OR with lux + irradiance)
Transparent Blind	`False`			Enable if blind is perforated/mesh — filters only, keeps adaptive positioning in summer
Lux Entity	`None`		`sensor.lux`	Measured lux
Lux Threshold	`1000`			Below threshold → "not sunny" (OR with irradiance + weather). Switch OFF = neutral.
Irradiance Entity	`None`		`sensor.irradiance`	Measured irradiance
Irradiance Threshold	`300`			Below threshold → "not sunny" (OR with lux + weather). Switch OFF = neutral.

Blindspot

Variables	Default	Range	Description
Blind Spot Left	None	0-max(fov_right, 180)	Start point of the blind spot on the predefined field of view
Blind Spot Right	None	1-max(fov_right, 180)	End point of the blind spot on the predefined field of view
Blind Spot Elevation	None	0-90	Minimal sun elevation for the blindspot to apply

Entities

Per-cover entry entities

The integration dynamically adds multiple entities based on the used features.

These entities are always available for each cover group:

Entity	Default	Description
`sensor.{type}_cover_position_{name}`		Reflects the current target position (%)
`sensor.{type}_control_method_{name}`	`intermediate`	Active strategy: `winter`, `summer`, `intermediate`
`sensor.{type}_start_sun_{name}`		Time when the sun enters the window's FOV (updated every 5 min)
`sensor.{type}_end_sun_{name}`		Time when the sun exits the window's FOV (updated every 5 min)
`binary_sensor.{type}_manual_override_{name}`	`off`	True when manual override is active for any blind in the group
`switch.{type}_toggle_control_{name}`	`on`	Activates adaptive control
`switch.{type}_manual_override_{name}`	`on`	Enables detection of manual overrides
`button.{type}_reset_manual_override_{name}`		Resets manual override tags for all covers in the group

When climate mode is configured:

Entity	Default	Description
`switch.{type}_climate_mode_{name}`	`on`	Enables climate mode strategy
`switch.{type}_outside_temperature_{name}`	`off`	`temp_switch` — outdoor temp primary for SUMMER check
`switch.{type}_lux_{name}`	`on`	Enable lux threshold — OFF = lux ignored (neutral)
`switch.{type}_irradiance_{name}`	`on`	Enable irradiance threshold — OFF = irradiance ignored (neutral)
`sensor.{type}_climate_debug_{name}`		Diagnostic sensor with full climate decision snapshot

When a presence entity is configured:

Entity	Default	Description
`switch.{type}_security_mode_{name}`	`off`	Security mode — closes covers when no presence detected

All Blinds hub entities

The All Blinds device (auto-created on first setup) exposes:

Entity	Name	Description
`cover.*`	Les volets	Aggregate cover — open/close/set position acts on all covers
`switch.*`	Les volets	ON/OFF adaptive control across all entries
`switch.*`	Sécurité volets	ON/OFF security mode across all entries that have a presence entity
`select.*`	Control mode	4-state: Auto / Off / All open (100%) / All closed (0%)
`scene.*_all_open`	Blinds open	Sets all covers to 100%
`scene.*_all_closed`	Blinds closed	Sets all covers to 0%

All Blinds hub device

The All Blinds entry is a singleton aggregator automatically created when the integration first loads. It has its own device card in the HA UI and does not interfere with individual cover group settings.

It can also be added manually: Settings → Integrations → Adaptive Cover → Add entry → Add 'All Blinds' aggregator.

Voice control

The hub device is designed for native voice assistant integration — no custom routines needed:

Voice phrase	Entity triggered	Action
"Alexa, turn on the blinds"	switch Les volets ON	Adaptive control enabled, manual overrides cleared
"Alexa, turn off the blinds"	switch Les volets OFF	Adaptive control disabled
"Alexa, open the blinds"	cover Les volets open	All covers → 100%
"Alexa, close the blinds"	cover Les volets close	All covers → 0%
"Alexa, activate blind security"	switch Sécurité volets ON	Security mode enabled — covers close on absence
"Alexa, deactivate blind security"	switch Sécurité volets OFF	Security mode disabled

Alexa routes commands by verb type: turn on/off → switch, open/close → cover.
The same entity names work with Google Assistant and Assist.

To re-sync Alexa after upgrading: say "Alexa, discover my devices" or go to the Alexa app → Devices → More → Discover devices.

Features Planned

Manual override controls
- ~~Time to revert back to adaptive control~~
- ~~Reset button~~
- Wait until next manual/none adaptive change
~~Algorithm to control radiation and/or illumination~~

Contributors

	Contributor	Role
🧑‍💻	Kamahat	Fork maintainer, feature development, bug fixes
🤖	Claude Opus 4.7 (Anthropic)	Code review, bug fixes, EN/FR documentation, changelog
⭐	Bas Brussee (@basbruss)	Original author

See CONTRIBUTORS.md for the full list including community contributors.

Name		Name	Last commit message	Last commit date
Latest commit History 766 Commits
.devcontainer		.devcontainer
.github		.github
.vscode		.vscode
config		config
custom_components/adaptive_cover		custom_components/adaptive_cover
images		images
notebooks		notebooks
scripts		scripts
tests		tests
.gitattributes		.gitattributes
.gitignore		.gitignore
.pre-commit-config.yaml		.pre-commit-config.yaml
.ruff.toml		.ruff.toml
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
CONTRIBUTORS.md		CONTRIBUTORS.md
LICENSE		LICENSE
README.fr.md		README.fr.md
README.md		README.md
hacs.json		hacs.json
poetry.lock		poetry.lock
pyproject.toml		pyproject.toml
requirements-dev.txt		requirements-dev.txt
requirements.txt		requirements.txt

Branch	Condition	Temp reference
WINTER	`temp_winter < temp_low`	`inside` preferred, `outside` fallback — always
SUMMER	`temp_summer > temp_high` AND `outside_high`	`outside` if `temp_switch=ON`, else `inside`
INTERMEDIATE	neither WINTER nor SUMMER	—

Uh oh!

Folders and files

Latest commit

History

Repository files navigation

Adaptive Cover

Features

Installation

HACS (Recommended)

Manual

Setup

Cover Types

Modes

Basic mode

Climate mode

Climate strategies

Security mode

Variables

Common

Vertical

Horizontal

Tilt

Automation

Climate

Blindspot

Entities

Per-cover entry entities

All Blinds hub entities

All Blinds hub device

Voice control

Features Planned

Contributors

About

Topics

Resources

License

Contributing

Uh oh!

Stars

Watchers

Forks

Releases 38

Sponsor this project

Uh oh!

Packages 0

Uh oh!

Uh oh!

Contributors

Uh oh!

Languages

Packages