Isoflux lines have straight edges when plotting

[dutra1243]

I'm trying to use your library in order to generate some wallpapers in luminet's famous picture were it was handplotted on a blackboard, however when plotting the lines to visualize how the dots will be plotted some isoflux lines have straight edges on their far end instead of a nice curve. It could be an issue with how I'm approaching this implementation or maybe the latest version of your library that I used at the time, but i would love to hear your thoughts on this.
Here's my repo in which i have some pictures that I could possibly use that have that effect. (Bear in mind this is only a side project so I vibecoded it all during classes, maybe thats why 😁)

[bgmeulem]

hiya

thanks for reaching out.
the straight edges you are referring to can be due to a handful of things. if you share a picture i can say for sure

1. the straight edges refer to the "smoothness" of the lines. in that case, increase the angular resolution. can be done in the BlackHole initializer already
2. the straight edges refer to an abrupt cutoff, probably towards the left or right of the image. in that case, you should increase outer_edge, which is limited to $30$ by default (in units of mass). can also be done in the initializer
3. there are small jagged jumps. in that case, increase the radial resolution, also in the initializer ;p

let me know if that helps!

[bgmeulem]

Hi

Did this resolve your issue?
If not, feel free to reply. If it did, I would close this issue.

[dutra1243]

Hi,
Sorry for not responding, i've been quite caught on work lately and i haven't had any spare time to dedicate to my side project, will try to analyze your suggestions as soon as possible.

[bgmeulem]

No worries, no rush, just curious!