Repository navigation
Release 0.4.0: timeline manager, one-page Settings, Tern 0.9.0 - #3
Merged
Merged
Conversation
…ime format - Timeline is the default list: results since you last looked above a Now rule, each active job once below it at its next run; paused, manual-only and broken jobs at the bottom. Backlogs over eight results fold to one summary per job, failures stay listed individually. Classic job list remains as a setting. - Job details beside the list at 150+ columns; full-width below that. Latest result called out, settings block, one-line run history; chart removed. - Seen state: new results fade after three seconds (or stay until marked seen); mark all seen with s. Failure marker stays until the job's next success. - Restyle with Tern theme tokens only: UI font for names, mono for numbers, edge markers for new results, accent selection, Now pill, raised details card, grouped dock with inline keycaps. Motion respects reduced motion. - Time format setting (Automatic / 12-hour / 24-hour) with one shared formatter. - Fixes: missed runs no longer counted as failures, cron steps read as 'Every 2 hours', consistent start-time timestamps, ceil-minute countdowns, 'Invalid job id..' double period. - Settings palette command; PRODUCT.md and the design brief for future work.
- Only when: a condition that's off shows just its toggle row; its settings
appear when turned on (values kept). Replaces ~13 'Turn on X first' hints.
- Check now only when at least one condition is on.
- 'If your computer was asleep' value fits ('Run once if under 3h late').
- Search box hidden in the job form (prefs has no field search to wire up).
- Save & run now copy matches Run now behavior (asks when a condition says no);
shorter hints throughout.
- Prompt previews drop Markdown heading marks.
- Form typography matches the manager (UI font for labels, mono for times).
- Settings is one "Agent Scheduler Settings" sheet with Status, Display,
Where runs start, Limits and Setup sections. Status shows a verdict, one
line per problem with the next step, and "Checked HH:MM" after Check
again; the separate Check setup dialog is gone (its availability text
moved to Help).
- Settings rows: segmented Time format and Layout, typed values on number
rows, rejected input keeps the draft with the reason above the field,
Reset via the kit's changed dot, value-aware hints, pinned key legend.
Shift+Tab moves back; Left/Right only step numbers and segments.
- Settings sheet has an opaque, blurred backing; plugin button CSS no longer
restyles the kit's own buttons (off-centre close X, double outlines).
- Timeline: when nothing is new, one quiet line ("Nothing new since 08:00.",
or "Nothing has run yet. <job> runs first, …" on a first visit) replaces
the last-looked rule, empty bands and Now pill. The Now rule appears only
with results above it or runs at it; empty sections are never drawn.
- Now pill text is opaque and readable in dark and light; glow removed.
- Mark all seen (button and s) appears only when something is unseen.
- Empty state: readable "Start from an example" heading, example icon and
"⏎ use" hint, one-line availability note, and the list's dock.
- Narrow panes keep each job's next-run time and example names whole.
- Selected rows keep their outline on hover.
- Job and global dock actions are the same outlined buttons; the tray around the job group and the divider before the global group are gone. The 20px gap and the "<job> · selected job" caption show their scope. - The default (Enter) action is accent-tinted: Open, Resume run, Use example, Save, Run now. A blocked Save is dimmed; Stop run reads in red. - Delete and Pause all end their groups in muted text; Help moves before Pause all. - The job form's dock and the Stop, first-run, Run anyway and Conditions dialogs use the same button instead of the old pill badges (C.badge is gone); buttons without a key show no empty keycap. - Help is grouped into The selected job, Move and open, and All jobs, in two columns that fold to one in narrow panes. Keys are written as the dock writes them (lowercase as typed, a capital means shift), "When jobs run" has its own section, and a Close button sits in the footer.
…shots
- Tern 0.9.0 lists a run tab's shell argv as {"-c", cmd}; tern_state.marker
only matched {"-l", "-c", cmd}, so every run ended as "Closed by you."
about five seconds after it started. It now accepts both. The fake tern
reports Tern 0.9.0's argv, so the suite fails without the fix.
- Built and tested on Tern 0.9.0: README, the setup check and the fake
tern version (tern.d.luau regenerated, unchanged).
- plugin.toml 0.4.0 and the CHANGELOG 0.4.0 section.
- README: new light/dark screenshots (manager with a live run, job
details beside the list, New job form) via <picture>; manager section
rewritten for users; old screenshots removed.
bmanturner
marked this pull request as ready for review
October 16, 2026 17:27
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
What
Release 0.4.0: the manager is redesigned around one question, what happened since I last looked?, Settings becomes one page, and the plugin is built and tested on Tern 0.9.0.
s, shown only when something is unseen). A failure marker stays on its job until the next success.Fixes
{"-c", cmd}instead of{"-l", "-c", cmd}, sotern_state.markernever matched. It now accepts both; the fake tern reports Tern 0.9.0's shape, so the whole suite covers it (it fails without the fix).Release
plugin.toml0.4.0,CHANGELOG.md0.4.0 section, README refreshed with new light/dark screenshots (<picture>), Tern 0.9.0 in README, the setup check and the fake tern;tern.d.luauregenerated (no API change).Testing
bun run test: 33 suites pass, includingrunner_settingsand the new timeline/empty-state cases inrunner_manager.@smolomp run (finished, about $0.004) for the hero screenshot, which is how the 0.9.0 run bug was found.