Murmur

Installation

Requirements

• Raspberry Pi 4 B
• Raspberry Pi OS Lite (64-bit)
• Mac mini with ethernet port

Wiring

See firmware/README.md.

Static IP setup

IMPORTANT: macos should have Internet Sharing enabled.

Then in macos network ethernet settings, set IPv4 Configured to Using DHCP with Manual Adress, with the IP address to <ROUTER_IP>.

$ sudo apt-get install dhcpcd5
$ sudo service dhcpcd start
$ sudo systemctl enable dhcpcd
$ sudo nano /etc/dhcpcd.conf

/etc/dhcpcd.conf

interface <INTERFACE>
static_routers=<ROUTER IP>
static domain_name_servers=<DNS IP>
static ip_address=<STATIC IP ADDRESS YOU WANT>/24

Software

See releases for the app binary, or clone this repo and compile the package (see Development below).

Development

$ git clone https://github.com/chevalvert/murmur
$ cd murmur
$ yarn install
$ yarn start
$ yarn version

$ yarn pkg

Credits

• At Aero by Arillatype.Studio®
• JSX and state utils heavily based on pqml’s work.

License

MIT.