This is an Arduino-powered LED mask inspired by BoyWithUke 🎶. It features animated LED eyes and a smile, activated using an ultrasonic sensor.
- Arduino Nano
- 5 LED Matrix Displays (8x8)
- Ultrasonic Sensor
- Jump Wires & Resistors
• Connect VCC of MAX7219 & Ultrasonic Sensor to 5V on Nano
• Connect GND of MAX7219 & Ultrasonic Sensor to GND on Nano
- Install Arduino IDE.
- Add MD_Parola and MD_MAX72XX libraries in Arduino IDE.
- Connect Arduino Nano to your PC.
- Open LED_Matrix_Eyes2.ino → Select Nano Board & Port → Click Upload.
- Open LED_Matrix_Smile1.ino → Upload it the same way.
- Power the setup → Enjoy your LED Mask!
✅ Dynamic LED eyes 👀
✅ Animated smile 😀
✅ Auto-activation with ultrasonic sensor 🛑
✅ USB-powered 🔌
![LED Mask] https://github.com/divyanshAgarwal123/LED-MASK-/blob/main/eyes_working.mp4
- The LED_Matrix_Eyes2.ino code controls the LED matrices for eye animations.
- The LED_Matrix_Smile1.ino handles the smile animation.
- The ultrasonic sensor detects when someone is near and turns on/off the mask.
LED_Matrix_Eyes2.ino→ Handles eye movementLED_Matrix_Smile1.ino→ Controls smile animations
Inspired by BoyWithUke, an artist known for wearing a unique LED mask. This project brings his signature look to life using Arduino and electronics.
- Clone the repo:
git clone https://github.com/divyanshAgarwal123/LED-Mask.git