Skip to content
Ahmed Ghalab edited this page Oct 26, 2017 · 7 revisions

Apache Installation \

Ref: https://www.digitalocean.com/community/tutorials/how-to-install-the-apache-web-server-on-ubuntu-16-04 sudo apt-get update sudo apt-get install apache2

Enable Module of proxy

sudo a2enmod proxy sudo a2enmod proxy_http

#then restart Apache sudo systemctl restart apache2

The following specific Apache Config files are used:

/etc/apache2/sites-enabled/000-default.conf

THIS FILE IS NEVER CHANGED! IT HAS A SYMLINK TO THE NEXT FILE MENTIONED BELOW WHICH IS EDITED BY US

<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        ServerName www.hashtails.com
	ServerAlias hashtails.com
        ProxyPreserveHost On
        ProxyRequests Off
        #ServerAdmin webmaster@localhost
        #DocumentRoot /var/www/html
        <Proxy *>
        Order deny,allow
        Allow from all
    </Proxy>
        ProxyPass /api http://localhost:8080/api
        ProxyPassReverse /api http://localhost:8080/api

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	ProxyPass /hashtag-analyzer http://localhost:8080/hashtag-analyzer/
        ProxyPassReverse /hashtag-analyzer http://localhost:8080/hashtag-analyzer/
        ProxyPass / http://localhost:8080/hashtag-analyzer/
        ProxyPassReverse / http://localhost:8080/hashtag-analyzer/
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>
<VirtualHost *:80>
	# The ServerName directive sets the request scheme, hostname and port that
	# the server uses to identify itself. This is used when creating
	# redirection URLs. In the context of virtual hosts, the ServerName
	# specifies what hostname must appear in the request's Host: header to
	# match this virtual host. For the default virtual host (this file) this
	# value is not decisive as it is used as a last resort host regardless.
	# However, you must set it for any further virtual host explicitly.
	ServerName www.eventyzer.com
	ServerAlias eventyzer.com
	ProxyPreserveHost On
	ProxyRequests Off
	#ServerAdmin webmaster@localhost
	#DocumentRoot /var/www/html
	<Proxy *>
        	Order deny,allow
        	Allow from all
	</Proxy>
	ProxyPass /api http://localhost:8080/api
	ProxyPassReverse /api http://localhost:8080/api

	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	ProxyPass /event-monitoring http://localhost:8080/event-monitoring/
        ProxyPassReverse /event-monitoring http://localhost:8080/event-monitoring/
	ProxyPass / http://localhost:8080/event-monitoring/
        ProxyPassReverse / http://localhost:8080/event-monitoring/
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf
</VirtualHost>

/etc/apache2/sites-available/000-default.conf

<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        ServerName www.hashtails.com
	ServerAlias hashtails.com
        ProxyPreserveHost On
        ProxyRequests Off
        #ServerAdmin webmaster@localhost
        #DocumentRoot /var/www/html
        <Proxy *>
        Order deny,allow
        Allow from all
    </Proxy>
        ProxyPass /api http://localhost:8080/api
        ProxyPassReverse /api http://localhost:8080/api

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	ProxyPass /hashtag-analyzer http://localhost:8080/hashtag-analyzer/
        ProxyPassReverse /hashtag-analyzer http://localhost:8080/hashtag-analyzer/
        ProxyPass / http://localhost:8080/hashtag-analyzer/
        ProxyPassReverse / http://localhost:8080/hashtag-analyzer/
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>
<VirtualHost *:80>
	# The ServerName directive sets the request scheme, hostname and port that
	# the server uses to identify itself. This is used when creating
	# redirection URLs. In the context of virtual hosts, the ServerName
	# specifies what hostname must appear in the request's Host: header to
	# match this virtual host. For the default virtual host (this file) this
	# value is not decisive as it is used as a last resort host regardless.
	# However, you must set it for any further virtual host explicitly.
	ServerName www.eventyzer.com
	ServerAlias eventyzer.com
	ProxyPreserveHost On
	ProxyRequests Off
	#ServerAdmin webmaster@localhost
	#DocumentRoot /var/www/html
	<Proxy *>
        	Order deny,allow
        	Allow from all
	</Proxy>
	ProxyPass /api http://localhost:8080/api
	ProxyPassReverse /api http://localhost:8080/api

	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	ProxyPass /event-monitoring http://localhost:8080/event-monitoring/
        ProxyPassReverse /event-monitoring http://localhost:8080/event-monitoring/
	ProxyPass / http://localhost:8080/event-monitoring/
        ProxyPassReverse / http://localhost:8080/event-monitoring/
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf
</VirtualHost>

Clone this wiki locally