RXM

• Was originally just for having a digital SiriusXM tuner essentially but I decided to try to emulate most compatible devices

Features

• Emulate a ST2 smart tuner with SiriusXM only (No AM/FM tuner)
• Emulate an SMS3/iBridge device (Limited)
• Full preset support for UNO-TS2(d) units
• Favourites for SiriusXM (F1 and F2)
• Full channel/song/artist data on keypads (For SiriusXM, Roon, and SMS3/iBridge)
• Change saved Roon live radio and Sirius channels with the keypad and play/pause them (Only forward/backwards with SMS3)
• API to control volume, source, channel, and power of a zone

Source naming

• Go into RXM/Configuration/RNET.cs and scroll to the bottom
• Uncomment/comment the sources you don't use/you do use and rename them to your actual source names (they are zero-based ONLY in this config, so source 0 would be source 1)

SiriusXM setup

• Install the SXM python library
• Go into RXM/XMGen and make sure your stations.txt file is up to date (by running sxm -l)
• then run the py file and it should automatically generate your XM_STATIONS.json file
• After completion, place the generated json file where your build exe is

Roon setup

• Make sure RXM is closed, it bugs out while the extension is not enabled
• Go into RXM/Roon/RoonApi
• Install modules
• Run server.js
• Enable the extension in your Roon app
• Restart RXM

SMS3/iBridge setup

THERE IS NO UNO-S2 KEYPAD SUPPORT AT THE MOMENT, AND THERE IS LIMITED/UNSUPPORTED FUNCTIONALITY FOR SOME FEATURES

• Go into RXM/Configuration/Main.cs and look for PcConfig and change the BaseUrliBridge to your actual server ip/port
• In Program.cs, change the var iBridge = new RXM.Devices.SMS3.SMS3(SM, source: 3); line to var iBridge = new RXM.Devices.iBridge.iBridge(SM, source: 3); only if you want iBridge.
• Then change your source to your actual source number
• Make sure the server is running before starting RXM
• Start RXM, and it should say [SMS3] status now=null or [iBridge] status now=null if you have ibridge
• Then, set that source on your UNO-TS2(d) to the iBridge mode type and you should be able to navigate through the menus

Setting up RXM

• Go into RXM/Configuration/Main.cs, and change your COM port to your actual COM port that is connected to your CAV6.6
• Go into Program.cs, then look for Sirius = new Devices.ST2.SXM(SM, 1, PresetManager, Tune: async (i) => await StartChannel(i, null!));
• Change the source number, which is 1, to your actual Sirius source number
• Start sxm
• Run RXM, and everything should work correctly