Emulation of most of the Idun cart's functionality can be done with this modified version of Vice. This emulator can be run locally on the idun-cartridge, or remotely on another computer that can connect to the idun-cartridge across the network. When you run it, you have to pass an idunhost parameter, which is the network address/port where the emulator will find the cartridge. For the default setup, idunhost will need to be idunpi.local:25232.
Most of the features of the idun cart are available through the emulator, including developing apps that use Lua. This makes the emulator very handy for developers working on Idun tools & applications. You can run it on your desktop, use the monitor and other debugging aids the emulator offers, then immediately step over to your Commodore and run the exact same binary there. No shuttling files around required, and no need to setup a "development environment" since you can build your software right on the cartridge itself!
This emulator can also work for development even if you lack the actual idun cartidge hardware. You can download the image for idun, burn it to an SD card, and use it to boot any current model Raspberry Pi.
To use the emulator on the Raspberry Pi connected with your idun cart, install the latest release from the idun package repository.
sudo apk add idun-vice
Connect a keyboard to your RPi, and start the emulator using the included launch script vice. The emulator runs fullscreen using SDL3. Press F12 to access the Vice menu. The vice command is a sophisticated launcher. Run vice -h for a brief overview. The most important attributes of the launcher you need to know:
vicerespects the mode switch position of the cartridge, and starts the emulator program that matches the mode (x128 or x64sc).- You can switch to the OTHER mode by just running
vice -o. - You can disable integration with Idun by adding the
-dswitch. - You can run some other Vice program using the
-mswitch (e.g.vice -m xpet). - You can pass any additional emulator arguments for Vice by just appending them to the command.
In the likely event that you want to use idun-vice on a Windows desktop, you can just download the latest insaller release from the "Releases" section of the Github repository.
This GitHub repo is buildable on a RasPi, and most *nix systems. You will have to install all the generic autoconf and C language tooling first.
git clone https://github.com/idun-project/idun-vice.git
cd idun-vice/vice && ./autogen.sh
{Copy the ./configure ... from idun-vice/APKBUILD}
make
make install
To connect to the cartridge from a PC running the emulator, you must edit ~/.config/idunrc.toml and make sure io.socket is set as shown below. Otherwise, only local connection is allowed!
[io]
socket = "0.0.0.0:25232" # allow remote emulator connection