Skip to content

System Configuration

Jump to bottom
Ishraq Ibne Ashraf edited this page Oct 19, 2019 · 7 revisions

To switch the Wio Node into configuration mode (refer to this table).

In configuration mode the Wio Node starts a WiFi access point. Initially the name of the access point would be of the form, Thirst-XXX where each X is a 1-byte hexadecimal number and the password of the access point will be 1234567890.

⚠️ NOTE: In configuration mode, only one client at a time can connect to the access point to configure the device.

After connecting to this access point the configuration interface will be available on the IP address: 192.168.42.1 which can be used with a web browser. Refer to graphic System Configuration Web Interface.

System Configuration Web Interface

System Configuration Web Interface.

Clone this wiki locally