A measured mechanical model of an OV9281 camera module for enclosure design, cage mounting, and clearance checks in a four-camera motion-capture system. A printed model was compared with the real module before designing the housing.
| Format | File |
|---|---|
| Editable FreeCAD model | FCStd |
| Printable model | STL |
Both files use millimetres. The PCB center is the XY origin, the rear PCB surface is Z=0, and the lens points in +Z.
| Isometric | Front |
|---|---|
|
 |
| Rear | Side |
|---|---|
 |
 |
The printed model and actual camera are compared from the front, rear, and side.
| Front comparison | Rear comparison |
|---|---|
 |
 |
- Check dimensions against your own module before fabrication; lens and cable configurations may differ.
- Small non-mounting PCB holes are filled for printability. The ribbon-cable envelope is reinforced to 0.80 mm and does not represent the actual cable thickness.
- This model is for mechanical fit checks, not manufacturer-certified production CAD.