rtl8832bu

This repo is base on rtl8852au and support kernel 5.19

The driver supports rtl8832bu/rtl8852au chipsets.

This driver currently handles the following devices:

• UGREAN RTL8832BU with USB WLAN Adapter

Installation instruction

Requirements

You will need to install "make", "gcc", "kernel headers", "kernel build essentials", and "git".

For Ubuntu: You can install them with the following command

sudo apt-get update
sudo apt-get install make gcc linux-headers-$(uname -r) build-essential git

If any of the packages above are not found check if your distro installs them like that.

Installation

When a USB device is plugged in, or detected at boot, this rule causes the utulity usb_modeswitch to unload any 0bda:1a2b devices that it finds. If you have a device with different ID, change the rule accordingly.

The build this driver, do the following:

For all distros:

git clone https://github.com/jian-yu/rtl8832bu.git
cd rtl8832bu
make
sudo make install

When you get a new kernel, you will need to rebuild the driver. Do the following:
cd rtl8832bu
git pull
make
sudo make install

When your kernel is updated, then do a 'git pull' and redo the make commands.