Proven settings, art, and job files for an OMTech 50W fiber laser (Raycus Q-switched, F290 lens, 200x200mm field, EzCad2, LightBurn alongside). The goal: every material gets dialed in once, written down, and reused.
| Path | What |
|---|---|
machine.md |
Machine facts, focus test, safety. Start here. |
hatch.md |
Hatch recommendations by goal, every EzCad2 hatch field explained |
rotary.md |
Rotary attachment: hookup, EzCad2 parameters, calibration test |
materials/ |
The settings library, one file per material. Copy _template.md for a new one |
test-grids/ |
How to build a parameter test grid in EzCad2 to find a setting |
research/community-settings.md |
Settings other people report, with sources and confidence |
projects/<category>/<job>/ |
One folder per job: runbook.md, designs/, photos/ |
logos/ |
Reusable art, plus scripts that generate it |
jigs/ |
3D-printable fixtures (FreeCAD source + STL) |
windows-pc.md |
The laser PC's git clone: setup, update.bat / save.bat |
lightburn.md |
LightBurn galvo setup and EzCad2 to LightBurn term map |
machine-config/ |
Backups of the EzCad2 config (markcfg7) and lens correction |
GLOSSARY.md |
What the terms mean (Pen, Loop count, Coupon, ...) |
AGENTS.md |
Instructions for AI coding agents |
- Run the focus test in
machine.md(once per machine). - Get a coupon: scrap of the same material.
- Take starting values from
materials/orresearch/, build a test grid, mark it. - Pick the winning cell, try it on the coupon for real, photo it.
- Record it in
materials/<material>.mdasPROVEN.
Settings marked STARTING POINT have not been proven on this machine yet.
- Frequency stays 50 to 100 kHz (the Raycus source's range). Many online recipes say 20 to 30 kHz; those are for other lasers.
- Q-switched, not MOPA: no color marking on stainless, weak black marks.
- Fiber lasers are poor on wood and clear acrylic. Never laser PVC, vinyl, or PTFE (toxic gas).
projects/golf/p790-irons/: 2019 TaylorMade P790 irons, frosted into the chrome (surface mark,
no paint fill). Back panel: swamp scene with an alligator (image); alternates under
consideration: cropped $100 bill (image) and Damascus swirl (lines). Face: "FORE RIGHT" chalkboard
lines (vector). Steps: runbook.md; EzCad2 card: ezcad-setup.md.
cd logos/fore-right && python3 make_fore_right.py --width 55 --height 28 --rows 10 # SVG + DXF
cd logos/swamp && python3 make_swamp.py --width 60 --height 24 --dpi 600 --strip # PNGs
cd logos/hundred && python3 make_hundred.py --width 60 --height 24 --dpi 600 --strip # PNGs
cd logos/swirl && python3 make_swirl.py --width 60 --height 24 # PNGSizes are placeholders until the club is measured (see the P790 runbook). Needs Python 3;
make_fore_right.py also needs fontTools.
OD5+ glasses rated for 1064nm every time, fume extraction on (chrome and coatings), never leave a running job.