Digipeater Configuration

Callsign: Your callsign with SSID

Symbol Code: Symbol code displayed on aprs.fi Default is digi "#".

Symbol Table: For alternatif symbols use. Default table is "L" for LoRa.

Use GPS if Possible: Enable this option if you want to use GPS location for your Digipeater (and if there is a GPS module connected to your device)

GPS Timeout: If GPS is enabled but can not acquire a GPS fix, following latitude and longitude values used after this timeout (seconds).

Latitude: Use Decimal Degrees (Google Maps format), for example: 33.816

Longitude: Use Decimal Degrees (Google Maps format), for example: -111.736

If you need a GPS Coordinate Converter, try this one: https://boulter.com/gps/

Send Digipeater Location: If enabled, Digipeater location is sent to RF regularly.