Repository navigation
Sync upstream quattro through 4d64235 - #136
Merged
Merged
Conversation
The kernel caps a GPU at half of RAM. An AMD APU like Strix Halo has next to no VRAM, so on 64 GB the GPU can't load a 38 GiB local model. Raise ttm.pages_limit to all of RAM but 8 GiB on machines with an AMD GPU and more than 16 GB, on install and through a migration that rebuilds the boot image for the next boot. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
vc4 scans out of the CMA pool, which must sit in the first GiB of RAM. The Pi firmware's device tree reserves 64 MiB, and a 2560x1440 desktop does not fit in it. Hyprland then logs "Couldn't allocate a gbm buffer" and falls back to a lower mode. 512 MiB, what Raspberry Pi OS reserves, failed under UEFI. The EFI stub places the kernel at a random physical address. On one boot it landed at 0x08c60000, which left 472 MiB free in the first GiB. The kernel logged "cma: Failed to reserve 512 MiB", vc4 could not set up its framebuffer, and the disk unlock prompt never reached the screen. 256 MiB reserved on all 10 boots tested. On one of them the kernel sat near the middle of the free span (0x15820000), and CMA still fit at 0x1a400000. A 1440p desktop uses 55.6 MiB of it. The board setup now writes cma=256M into a Limine drop-in on a Pi 4 Model B.
The Pi 4 Model B's CYW43455 needs Raspberry Pi's patch file, which linux-firmware lacks. Without it the Bluetooth controller runs its ROM firmware and reports the placeholder address AA:AA:AA:AA:AA:AA. The board setup now installs raspberry-pi-4-bluetooth-firmware, which puts the file under the name btbcm looks for first on this board. The package is listed in omarchy-other.packages, so the ISO carries it for offline installs.
* Move About into the System menu, above Screensaver The root menu loses its About row; System now opens with it. The old `about` route stays as an alias, and every translation moves with the key. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point the menu extension example at system.about Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
…omacom#19233) * Wake the HP ZBook Ultra G3a 16 from sleep without an 80 second freeze HP's Opal drive-unlock SMI, run when the SSD powers back on during resume, has the SSD DMA into an ACPI NVS buffer the IOMMU doesn't map. The command never completes and every core waits in SMM until the handler times out. Run the IOMMU in passthrough on this model until a BIOS fixes it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Give the ZBook sleep migration its own timestamp 1794503281 is already the Snapdragon power-profile migration, so users who ran it would have skipped this one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
…com#19138) * Give each local model a launcher of its own, with a loading show Setting up a local model adds a launcher with its name and its vendor's logo, as signing in to a subscription does, and removing the model takes it away. The launcher opens an agent on the model and starts it first when it isn't running, drawing the load in the terminal until it's up. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Show only the percentage while a local model loads Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Keep local-model launchers in step when syncs overlap or reads fail Lock the whole sync so the wrapper and the panel can't remove each other's launchers, keep launchers when the status can't be read, sync on the panel's first reading so a setup that finished while the shell was away gets its launcher, let the migration fail so it retries, and fold the launcher tests into the existing agent tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.2 <noreply@anthropic.com>
) * Turn off herdr's own update check, since pacman updates it Omarchy installs herdr as a pacman package in /usr/bin. herdr's background version check still fetches herdr.dev/latest.json and, for any install it doesn't recognize as Homebrew, mise or Nix, shows "update ready" with the advice to run `herdr update`. That command can't write /usr/bin and fails with "install directory not writable ... Try running with appropriate permissions", which points users at sudo and a binary pacman no longer owns. Set [update] version_check = false in the shipped config, and add a migration that appends the same table to existing configs. The migration reads the config with Python's tomllib, so quoted keys and strings can't fool it. It leaves alone symlink-managed configs, any config that already sets something under update, and any config that doesn't parse. It reloads a running herdr server, which applies the setting without restarting panes. manifest_check stays on, so agent detection rules keep updating between herdr releases. * Leave a herdr config that isn't UTF-8 alone in the migration tomllib raises UnicodeDecodeError for a config with bytes that aren't UTF-8, such as a comment saved in Latin-1. That error isn't a TOMLDecodeError, so the migration exited 1 under bash -e and stopped every later migration. Treat it like any other config herdr can't parse, and leave the file alone.
* Give every installed agent harness a launcher of its own Selecting a harness as the default agent installs it, and now also adds a launcher beside Agent that starts it in a terminal of its own, as signing in to a Claude, Codex or Grok subscription already did. Each launcher ships in default/applications with its icon drawn in the papercraft and arcade sets and a packaged PNG. Hermes and OpenClaw bring launchers of their own apps. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Draw Copilot's launcher icon from its real mark The agents panel's Copilot logo is a broken drawing, so the icons drawn from it came out as a mangled van. Use the goggled face from Simple Icons. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show Copilot's real mark in the agents panel The panel's Copilot logo was a broken drawing that rendered as a mangled van. Use the goggled face from Simple Icons, in white and in its dark version for light themes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add launchers for every agent harness already installed The migration gave only the default harness its launcher. It now asks omarchy-default-agent --installed about each harness that ships one, and adds those missing, leaving launchers already in place alone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fail a launcher that couldn't be written The launcher command ended on update-desktop-database || true, so a copy that failed still succeeded, and the migration adding launchers was marked done without them. It now fails, and the migration stays pending. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
…19243) * Switch to an added agent account and say it's ready for more Adding another subscription now makes it the account new sessions use, since that's the one you want tokens from next. Running sessions stay where they are. The notification reads "Claude Code is ready for more" with "Tokens now flowing from <label> account", and clicking it opens the agent like the first sign-in's does. Both stay up for 30 seconds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Leave the agent ready notifications at the default timeout Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Switch to recovered accounts too, and say when switching fails An interrupted sign-in finished on retry now becomes active and gets the same ready-for-more notification as a fresh one. If the choice can't be saved, the account is still added and the result says new sessions couldn't be switched to it, rather than claiming tokens flow from it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Move hardware controls into omarchy device omarchy-hw-* only detects hardware, so the controls get a namespace of their own: device gpu hybrid, device touchpad, device touchscreen and device keyboard toprow. The old names stay as hidden wrappers, so bindings, menus and scripts that call them keep working. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the unreleased keyboard toprow alias omarchy-keyboard-toprow never shipped in a release, so nothing calls it by that name. Its config header names the new command too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Compare only the top-row options, so an older comment forces no rebuild Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Leave translated manual chapters to the translation sync Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Let a hand-chosen agent account overrule autoswitch `omarchy agent account use main` with auto switching on and main over the threshold switched new sessions to main, then the usage refresh it starts ended in autoswitch, which switched straight back. Every caller of `use` is a person choosing, so it now holds that account: autoswitch leaves it alone, and says nothing about it, until a check sees it under the threshold again. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the hold through a rename, a stale reading, and a lone account Renaming the held account left `held` on the old id, so the next refresh switched away. A stale reading may predate the choice, so only a fresh one releases the hold. With fewer than two accounts autoswitch returned before it could release anything, so a hold outlived the account's reset and disabled switching once a second account was added. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Co-Authored-By: Codex Medium <noreply@openai.com> --------- Co-authored-by: David Heinemeier Hansson <david@hey.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Codex Medium <noreply@openai.com>
* Tell agents a theme is colors.toml and downloaded backgrounds Small models wrote every generated file by hand and drew backgrounds with ImageMagick. Say what Omarchy generates, list the palette keys and contrast to keep, and give a working wallpaper search. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Start Omarchy apps from a scaffold that passes its tests The scaffold writes the starter from templates.md, the LICENSE and git, then builds and tests it, so an agent edits a green project instead of spending its context retyping 1,400 lines of templates. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show agents how to make a bar plugin from scratch The plugin guide covered safety, motion and translations but not the manifest or the widget, so agents reverse-engineered both from the built-ins. Give a minimal plugin that validates and renders, and the commands that check it and put it on the bar. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Have agents pick theme backgrounds by eye from a contact sheet A local model picked an anime collage for a tea house theme by judging downloads from their brightness. Search general images only, show every candidate on one labelled sheet, and check the palette against the chosen background. Say why stock themes ship neovim.lua and vscode.json. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let agents look at the pages, apps, themes and plugins they build Local models shipped broken layouts, empty windows and unusable theme backgrounds because they never saw what they built, and the ones that tried left browsers running or blocked on a window that never closed. omarchy agent look renders each kind safely, without taking the focus or changing the user's theme or bar, and reports the errors it finds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point the theme, plugin and app skills at omarchy agent look Each tells the agent to look at what it built with the command for its kind, and to fix what it sees before calling the work done. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add a web-game skill for three.js games and toys Asked for a game, local models built the obvious version, and one crashed on a three.js method that doesn't exist. Give the shape of a single-file game with a loop that survives slow frames, the polish that makes it feel good, and how to check a run in a headless browser. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Have agents lint QML before building and test APIs in test cases A local model spent dozens of builds finding QML properties that don't exist, one per test run, and compiled scratch files by hand that could never find Qt's headers. qmllint names them all at once in a second. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let Omarchy apps draw themselves for omarchy agent look Capturing a window on screen hangs while the display sleeps and flashes a window on the user's desktop. The starter's main.cpp now saves its window offscreen when asked, pressing keys through its Shortcuts first, so agents can check every mode headless. A patterns guide gives a verified two-pane layout with the traps local models kept falling into. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Render plugin previews offscreen while the display is off Nothing on screen draws while the display sleeps, so a preview waited forever. A widget without a popup panel renders offscreen; one with a panel says why it can't. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kill an app that ignores the end of its offscreen look Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tell agents a new theme leaves out the published screenshots A local model spent turns working out what unlock.png and preview-unlock.png are for, then copied them into its theme. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the scaffold building when the display name has a space The display name also names the test class, so "Flash Cards" gave class Flash CardsTests and the untouched starter failed to build. Make it an identifier there, and show a failed build's errors rather than the warnings after them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Note the highlighted button label trap in the app layout patterns Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tell agents game time runs slowly in the headless check A local model took a low score after eight headless seconds for a bug in its game loop. The headless browser draws few frames and the loop caps each step, so only a score that doesn't rise at all is wrong. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Say when a web game is done Local models kept tuning their games until they ran out of time. Done is playable with most of the polish, each item checked once; then summarize. Keep the title screen's text on a panel the glow can't wash out. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Say QSaveFile handles permissions on its own The note about a QTemporaryFile arriving as 0600 read as a QSaveFile problem, and a local model spent an hour fixing permissions QSaveFile already keeps. Checked on Qt 6.12: a replaced file keeps its mode and a new one gets the umask's default. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show agents how to find a bar icon by name A local model spent its time drawing the Nerd Font's glyphs to find a tomato. Look icons up by name in Nerd Fonts' table instead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Warn plugin authors off property names every item already has A local model's pomodoro declared property State state, which collides with Item.state, so its session never changed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Name theme colors the preview can't read The theme check drew gray for a color it couldn't read and skipped its contrast check, so a palette with `blue = "#GGGGGG"` passed with `problems: none` while showing a color the theme never set. Values are now read as omarchy-theme-color reads them, whole and between either kind of quote, so a suffix typo is caught and a single-quoted color is not reported missing. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Muse Wonder High <noreply@meta.com> * Press a look page key once and hold it for a frame Each key was sent to the window, the document and the body, and the last two bubble, so a window listener heard one press three times. The release followed in the same tick, before any frame could read the key as held. A press now goes once to whatever has the focus and is released after the next frame, or just before the next key where none comes, since headless Chrome draws only a frame or two in a whole run. The release goes to whatever has the focus by then, since the press may have removed the element it landed on. The test stands Chromium in for Chrome on an image from before Chrome was the default. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Muse Wonder High <noreply@meta.com> * Refuse look page --keys for a URL The presses are added to a copy of a local file, so for a URL they were dropped without a word and a game stayed on its title screen. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Never report an earlier screenshot as a new look With --out naming an image from an earlier look, a browser that failed left it in place and the command reported it as this run's screenshot. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Keep Chrome's sandbox for look page wherever it can start Every page ran with --no-sandbox, an outside URL included. Chrome refuses to start where it can't set its sandbox up, as inside an agent's own sandbox, which is the one place the flag is needed, so it is now added only after a blank page in a profile of its own also fails to draw. That decision rests on a run that loaded nothing of the page's, so a page can't get itself run unsandboxed by failing. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> Co-Authored-By: Muse Wonder High <noreply@meta.com> * Size an app that draws itself with look app --size --size only reached the on-screen fallback, so a scaffolded app was always drawn at its QML size and an agent couldn't check a smaller window for clipping. The template's hook now resizes the window to OMARCHY_LOOK_SIZE. The value is checked first, since it is also written into the compositor dispatch. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Start a program without the look hook only as a floating window Every program was first run with QT_QPA_PLATFORM=offscreen in case it drew itself. One that isn't Qt ignores that and opened an ordinary window, tiled and holding the keyboard focus, for half a minute before being killed and started again floating. Only a program whose file carries the hook's name gets the offscreen run now, which means the built binary rather than a script that starts it. Withholding the display instead would also stop scaffolded apps, whose GTK platform theme needs one to start. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Capture and close only the window look app started The on-screen fallback took the first window to appear after the launch, so a window the user opened meanwhile was captured in its place and its program killed, while the launched program was left running. The launched shell now records its pid, and only a window owned by that process or one it started is captured and closed; the program is ended whether or not a window came. The capture is of the window alone: the fallback to its area of the screen is gone, since that shows whatever is there by then, another workspace included, and grim captures a still or hidden window directly. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Muse Wonder High <noreply@meta.com> * Say when look app --after isn't whole seconds The wait goes through an arithmetic expansion, so `--after 0.5` died on a syntax error and then waited fifteen seconds for a window, and `010` was read as octal. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Muse Wonder High <noreply@meta.com> * Refuse a display name that would break the starter The display name is written into a QML string as it is, so `My "Notes"` gave a starter that failed to load before the agent had changed anything. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com> * Find a window a wrapper started before exiting by its session Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Codex Medium <noreply@openai.com> Co-authored-by: Muse Wonder High <noreply@meta.com>
…s up (omacom#19259) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
…ld (omacom#17164) * Mark the T2 t2bce_vhci initramfs module optional so other kernels build * no-mistakes(review): Use a literal T2 drop-in fixture in the hooks test * Retry the T2 boot image rebuild until it succeeds The migration rewrote apple-t2.conf and then rebuilt the boot images. When the rebuild failed or was interrupted, the next run found t2bce_vhci? already in place, skipped the rebuild and was recorded as done. linux-t2's image then still had no t2bce_vhci. A pending marker now goes down before the edit and comes off only after a rebuild with no failed kernel, so the rebuild runs again until it succeeds. It uses limine-mkinitcpio and checks for a failed kernel the way migration 1791621765 does. The comment names the 4.5.0 installer filter as the reason the keyboard was gone on linux-t2. --------- Co-authored-by: Emir Beganovic <beganovic.emir@gmail.com>
…macom#19269) Migration 1793464570 ran limine-mkinitcpio with no presence check. Limine is not in the base package set, so on a T2 Mac without it the migration failed on every run and held up every migration after it. It now runs mkinitcpio -P where limine-mkinitcpio is missing, as omarchy-plymouth-set does. A failed mkinitcpio -P exits non-zero, so the rebuild marker stays and the migration runs again. A comment also says which apple-t2.conf lines the trailing-space match covers.
Save keyboard boot mode when sysfs is read-only
Selecting Hermes stays on its own installer. The new harness launcher check applies to the other agents; Hermes already has a desktop app, so the test expects no terminal launcher beside it. Co-authored-by: Mark Groves <mark-groves@users.noreply.github.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
What changes
Upstream
quattromoved from3b36b9e19(omacom#19168, already on this fork as #135) to4d64235cd. Seventeen first-parent commits, all replayed. One is a merge (omacom#19013), replayed as a single commit. Nothing skipped. No conflicts.Ten files both sides had changed auto-merged:
bin/omarchy-default-agent, the English menu and CLI catalogs,default/omarchy/omarchy-menu.jsonc,install/omarchy-other.packages,manual/17-ai.md,shell/plugins/agents/Main.qml, and the agents panel, default-agent, and unowned-path tests. A three-way merge of those matches this branch. The default-agent test needed one follow-up: Hermes stays on its own installer and does not get a second terminal launcher, because the desktop app already has one.Fork delta vs
4d64235cdis 253 paths, the same set as quattro vs3b36b9e19. On the paths upstream did not touch, nothing differs. Face, Grok Bot, and Cursor stay.shownProvidersstays.linuxandlinux-headersstay. The translation-sync workflow stays absent.cursor-agentstays out of the mise tool list. The new Cursor CLI launcher is the harness entry upstream ships; the editor still installs from the official tarball. Lazy counts stay 20auto_updateand 30lazy. Power profiles still write throughbusctl.1794855305(Let AMD GPUs map all of RAM but 8 GiB, not half omacom/omarchy#19164).raspberry-pi-4-bluetooth-firmwareso the CYW43455 stops reportingAA:AA:AA:AA:AA:AA(Reserve 256 MiB of CMA on the Raspberry Pi 4 omacom/omarchy#19237, Install the Raspberry Pi 4's Bluetooth firmware omacom/omarchy#19240).aboutroute stays as an alias, and every menu translation moves with the key. The Fastfetch manual entry points there too (Move About into the System menu, above Screensaver omacom/omarchy#19220, Point the Fastfetch manual entry at System > About omacom/omarchy#19254).1794929085(Wake the HP ZBook Ultra G3a 16 from sleep without an 80 second freeze omacom/omarchy#19233).1794839007(Give each local model a launcher of its own, with a loading show omacom/omarchy#19138).1794938310leaves symlink-managed configs, configs that already setupdate, and configs that do not parse alone (Turn off herdr's own update check, since pacman updates it omacom/omarchy#19255).1794931275adds the missing ones (Give every installed agent harness a launcher of its own omacom/omarchy#19245).omarchy device: gpu hybrid, touchpad, touchscreen, and keyboard toprow. The old names stay as hidden wrappers (Move hardware controls into omarchy device omacom/omarchy#19229). Keyboard setup still saves the boot mode when sysfs is read-only, as in the install chroot (Save keyboard boot mode when sysfs is read-only omacom/omarchy#19013).omarchy agent lookfor themes, apps, games, and plugins, with offscreen captures and a scaffold that survives a display name with a space (Help local models make themes, apps, games and plugins omacom/omarchy#19086).t2bce_vhciinitramfs module is optional, so other kernels build. Migration1793464570rebuilds until it succeeds, and usesmkinitcpio -Pwhere Limine is not installed (Make the T2 t2bce_vhci initramfs module optional so other kernels build omacom/omarchy#17164, Rebuild T2 boot images with mkinitcpio where Limine is missing omacom/omarchy#19269).Catalogs: About moved in every language. The new account strings are English only. No translation-sync commit in this window.
Verification
Passed:
amd-gpu-memory-test.sh(3),hardware-quirks-test.sh(7),apple-silicon-quirks-test.sh(6),keyboard-toprow-test.sh(7),hybrid-gpu-test.sh(3),mkinitcpio-hooks-test.sh(43),unowned-system-paths-test.sh(2),desktop-entry-launch-test.sh(21),agent-look-test.sh(11),omarchy-app-scaffold-test.sh(6),agent-account-autoswitch-test.sh(19),agent-account-recovery-test.sh(4),agent-account-test.sh(33),agents-panel-test.sh(126),default-agent-test.sh(61),i18n-test.sh(401, one skip),./test/cli(138).No compositor, so the System menu, the new launchers, and the account notification were not drawn.
Screenshots
No visible change captured: this run has no compositor, so the menu move, the harness and local-model launchers, and the ready-for-more notification were not drawn.