Custom PCB for handling DDR control panel, keypad, card reader, and LED controls.
A side project for DDRduino, but theoretically compatible with regular setups as well! This is a 12 button matrix numpad, and connects to the rest of the system with an 8 pin JST connector.
PN5180-cardio Navigation LPCD by CrazyRedMachine
WS2812B Addressable LED Arduino Code by Moldypie
| Component | Description |
|---|---|
| DDRduino Assembly | Integrated board combining microcontrollers, USB interfaces, JST connector headers for Buttons/LEDs/card reader/keypad, and lighting power supplies. |
| Keymani Assembly | A 12-key matrix numpad for entering your PIN. |
| 8x IST 406 White 2x IST 406 Green |
IST-406 White buttons for the direction buttons. 2x IST-406 Green buttons for the Start buttons. IST MALL link |
| 2x PN5180 | NFC card readers to read your IC cards. AliExpress link |
| Control Panel | Up to you! I designed a very janky panel that I've been printing in pieces, you can do better! |
| Component ID | Component | Description | Quantity |
|---|---|---|---|
| U1 | 703W-00/54 | AC Power Entry Module | 1 |
| U101, U201 | TBD62003APG | Transistor Array | 2 |
| U301 | Arduino ProMicro | microcontroller for cab LEDs | 1 |
| <> | Arduino Leonardo | microcontroller for controls/button LEDs/card reader/keypad | 2 |
| <> | BOB-12009 | SparkFun Logic Level Converter - Bi-Directional | 2 |
| PS1 | IRM-60-5 PSU | power supply for cab LEDs | 1 |
| PS2 | IRM-20-12 PSU | power supply for button LEDs | 1 |
| C301-C308 | 1000 uF D10.0mm | Radial electrolytic capacitors (I used 25V) | 8 |
| R1-R4, R13-R14 | 1 MOhm 0805 | SMD resistors | 6 |
| R5-R12 | 5.11 kOhm 0805 | SMD resistors | 8 |
| R101-R105, R201-R205 | 10 kOhm 0805 | SMD resistors | 10 |
| R301-R308 | 330 Ohm 0805 | SMD resistors | 8 |
| J5-J6 | USB1035-GF-P-0-B-B | USB-A ports | 2 |
| J1-J4 | USB4085-GF-A | USB-C ports | 4 |
| CN101, CN201 | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | 6 pin connector header for buttons | 2 |
| CN102, CN202 | JST_EH_B7B-EH-A_1x07_P2.50mm_Vertical | 7 pin connector header for button LEDs | 2 |
| CN104, CN204 | JST_EH_B11B-EH-A_1x11_P2.50mm_Vertical | 11 pin connector header for PN5180 card reader | 2 |
| CN105, CN205 | JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | 8 pin connector header for keypad | 2 |
| CN301-CN308 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | 3 pin connector header for cab LEDs | 8 |
| CN111-CN112, CN211-CN212, J101, J201 | PinHeader_1x06_P2.54mm_Vertical | 6 pin header for logic level converter, Leonardo | 6 |
| J102-J103, J202-J203 | PinHeader_1x08_P2.54mm_Vertical | 8 pin header for Leonardo | 4 |
| J104, J204 | PinHeader_1x10_P2.54mm_Vertical | 10 pin header for Leonardo | 2 |
| J105, J205 | PinSocket_2x03_P2.54mm_Vertical | 3 pin socket for Leonardo | 2 |
| Component ID | Component | Description | Quantity |
|---|---|---|---|
| SW1-SW12 | PG1353 | Kailh Choc V2 keyboard switch | 12 |
| D1-D12 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal diodes for matrix keypad | 12 |
| CN1 | JST_EH_S8B-EH_1x08_P2.50mm_Horizontal | 8 pin connector header for external connection (DDRduino) | 1 |
| <> | Keycaps! | I used 2x "DSA PBT Blue and White Keycaps Set 145 Keys" keycap sets I found on sale at KBDfans, but it seems to be out of stock/discontinued. The main thing for me was finding a set with a 00 key. | 2 |
There are also provisions for LEDs, but I don't use them since they interfere with my switches and are blocked by my keycaps:
| Component ID | Component | Description | Quantity |
|---|---|---|---|
| C1-C12 | 100 nF 0805 | SMD capacitors | 12 |
| D13-D24 | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | SK6812MINI LEDs | 12 |
| CN2 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | 3 pin connector header for LED control | 1 |
- Download the Navigation LPCD branch of CrazyRedMachine's PN5180-cardio code.
- Replace the
Config.hwith the customConfig.h.PN5180-cardio-navigation-lpcd (1P)orConfig.h.PN5180-cardio-navigation-lpcd (2P)versions, depending on which player control Arduino you are flashing. - Upload the sketches to the Arduino Leonardos.
- If using the LED controller, upload the
LED_promicro_version.inosketch to your ProMicro.
#define PN5180_PIN_NSS 0
#define PN5180_PIN_BUSY 2
#define PN5180_PIN_RST 1
#define PIN_ROW1 3
#define PIN_ROW2 A0
#define PIN_ROW3 A1
#define PIN_ROW4 A2
#define PIN_COL1 A3
#define PIN_COL2 A4
#define PIN_COL3 A5
#define PIN_BUT_UP 12
#define PIN_BUT_DOWN 11
#define PIN_BUT_LEFT 10
#define PIN_BUT_RIGHT 9
#define PIN_BUT_START 13
#define PIN_LED_UP 7
#define PIN_LED_DOWN 6
#define PIN_LED_LEFT 5
#define PIN_LED_RIGHT 4
#define PIN_LED_START 8
In additon, player 2 changes:
#define CARDIO_ID 2
#define CUSTOM_VIDPID 2
#define LED_PIN_1 10
#define LED_PIN_2 16
#define LED_PIN_3 14
#define LED_PIN_4 15
#define LED_PIN_5 18
#define LED_PIN_6 19
#define LED_PIN_7 20
#define LED_PIN_8 21
#define NUM_STRIPS 8