This project presents the design and implementation of a secure and scalable campus network infrastructure using Cisco Packet Tracer. The network was developed for different departments including Programming Lab, Networking Lab, Faculty Office, and Accounts Department.
The project demonstrates practical implementation of VLANs, inter-VLAN routing, RIP routing protocol, DHCP, DNS, HTTP server configuration, and ACL-based network security.
- 🔹 VLAN Configuration
- 🔹 Inter-VLAN Routing
- 🔹 RIP Version 2 Routing
- 🔹 DHCP Server Configuration
- 🔹 DNS Server Configuration
- 🔹 HTTP Server Setup
- 🔹 ACL Security Implementation
- 🔹 Department-wise Network Segmentation
- 🔹 Router and Switch Configuration
- 💻 Programming Lab
- 🌐 Networking Lab
- 👨🏫 Faculty Office
- 💼 Accounts Department
- 🖥️ Server Room
| Department | VLAN | Network |
|---|---|---|
| Programming Lab | VLAN 10 | 192.168.10.0/24 |
| Networking Lab | VLAN 20 | 192.168.20.0/24 |
| Faculty Office | VLAN 30 | 192.168.30.0/24 |
| Accounts Department | VLAN 40 | 192.168.40.0/24 |
| Servers | VLAN 50 | 192.168.50.0/24 |
- Cisco Packet Tracer
- Cisco Routers
- Cisco Switches
- RIP Routing Protocol
- VLAN Technology
- DHCP, DNS, HTTP Servers
- Access Control Lists (ACLs)
- ✅ Design a scalable campus network
- ✅ Implement VLAN segmentation
- ✅ Configure inter-VLAN communication
- ✅ Enable dynamic routing using RIP
- ✅ Configure network services
- ✅ Improve network security using ACLs
The network was tested successfully using:
- 📶 Ping connectivity tests
- 🔍 VLAN verification
- 🌍 RIP routing verification
- ⚙️ DHCP testing
- 🔐 ACL restriction testing
- 📄 Packet Tracer (.pkt) File
- 📘 Project Report
- 🖼️ Topology Screenshots
🔗 GitHub: https://github.com/nihahawas
💼 LinkedIn: https://www.linkedin.com/in/nihahawas45