Edgar Case 2.0

The 1.0 case is quite easy to assemble, but the 2.0 case has a few extra parts. You should have received:

• 1× Back Panel
• 1× Front Panel
• 1× Screen Holder
• 5× M2.2×12 screws
• 2× M2.2×10 screws
• 1× SD card extender

Assembly

Lay out the front panel like this:

1. Insert the screen such that the FFC cable is pointing to the right.

2. Attach the screen holder to the left and secure it with the 2× M2.2×10 screws (these are the shorter 2x screws.)

3. Plug in the FFC cable to the Flipper Blackhat like so

4. Insert the Flipper Blackhat into the case

5. Place the back panel on top, sandwiching the Flipper Blackhat between the front and back panels.

6. Secure everything with the remaining 5× M2.2×12 screws.

7. Use the SD card extender to access the SD card port of the Flipper Zero.