Daylight Clock MK7

Todo

• Set alarms to 1 hour intervals to make the trigger math more simple
• Remove alarms trigger on boot
• Add var for alarm set and return with JSON
• Add var for offset of timezone and note about daylight saving.
• Get Hardware working on pins
• Map pin assignments
• add brightness control to phases
• Send ip to the 7 seg display
• hh and mm need to updated for the clock to function (7seg)

Version

016

• No major revisions
• changed the SSID and password

017

• Change alarmset var to 0
• add to alarm set function to change to 1
• Add id's to alarms
• Uncomment TM1637 Code
• Remove test loop for light on
• Remove set Alarm from the setup.
• Added brightness to alarms
• Change delay from 10 to 5 seconds after the NTP server has been working

018

• Clean commented code up so its more readable.

019

• Hardware build

020

• Final Code

Known Issues

1. On "No Packet yet error" need to output to 7 seg "err"

Pin assignments

###C++ Arduino Code=Markings on Wemos

• D8 = D10 piezoPin
• D7 = D7 Clk
• D6 = D6 DIO
• D5 = D5 Input button
• D4 = D9 Not Used
• D3 = D8 Neo Pixel