3D-printable enclosure for an OpenFlight monitor. Print a shell, radar front, camera front, screen, and feet, then assemble.
Print STLs from each part’s v1/ folder. experimental/ is for in-progress parts.
| Page | What it covers |
|---|---|
| Choosing a variant | Decision tree and print list |
| Printing | Orientation, materials, settings |
| Required hardware | Heat-set inserts and screws per part |
| Shell and power | Ethernet, DC jack, and power button; X12 boards |
| Pi adapters | No-UPS (x1202) and x1209 (x12-a1 shell) |
| Feet | Solid vs adjustable |
| Screen bezel | Display size options |
| Camera front | Camera, sound-detector + retainer; UART / USB OPS |
| Radar front | No-fill (open in front of the radars); filled front is EOL |
| CAD drawings | Assembly and print-orientation stills |
CAD source: step/Open-Flight-Monitor-3.step. Component STEP files: reference-models/.
Minimum bed: 220 × 190 mm. The shell is the largest part.
Printers that meet that (and common larger beds):
| Printer | Bed |
|---|---|
| Creality Ender 3 / Ender 3 V2 / Ender 3 V3 SE / Ender 3 S1 | 220 × 220 mm |
| Creality K1 | 220 × 220 mm |
| Sovol SV06 | 220 × 220 mm |
| Anycubic Kobra 2 | 220 × 220 mm |
| Elegoo Neptune 3 / Neptune 4 | 225 × 225 mm |
| Prusa MK3S+ / MK4 | 250 × 210 mm |
| Bambu Lab A1, P1S, X1C | 256 × 256 mm |
The Bambu A1 mini (180 × 180 mm) is too small.
- Choose UPS/HAT, screen, front panel, and feet.
- Copy the STL paths from Choosing a variant.
- Print using Printing.
- Assemble using Assembly.