Repository navigation
PiInstall
pauls1024 edited this page Jan 18, 2015
·
4 revisions
references:
- http://www.raspberrypi.org/documentation/installation/noobs.md
- http://qdosmsq.dunbar-it.co.uk/blog/2013/06/noobs-for-raspberry-pi/
Usind a new sd card of 8GB or greater and preferrably Class 10 (ie fast) you need to format the card as a single FAT partition and then unzip NOOBS onto the card... in Linux I do it like this:
wget http://downloads.raspberrypi.org/NOOBS_latest
sudo umount /dev/mmcblk0p1 /media/gash
sudo fdisk /dev/mmcblk0
within the programme delete the current partitions (d),
then create a new primary partition using all available space, ie accept defaults (n),
and set the partition type (t) to FAT32 (option b)
finally save the new partition table (w)
sudo mkfs.vfat /dev/mmcblk0p1
cd /media/8D00-74C5/
unzip /home/pauls/Downloads/NOOBS_v1_3_11.zip
cd /
sudo umount /dev/mmcblk0p1
Make sure the power to the Raspberry Pi is unplugged or off. Insert the new SD card and then power on. Select Raspbian as the Operating System to Install. In configuration screens I set the timezone to Belfast, and CPU Overclock to moderate, I set it to boot into the X GUI environment, I turn on the ssh server.
When first boot is complete go to the TerminalLXC and then
apt-get update
apt-get upgrade
Disable desktop sleep: ref http://www.raspberry-projects.com/pi/pi-operating-systems/raspbian/gui/disable-screen-sleep
sudo nano /etc/lightdm/lightdm.conf
Add the following lines to the [SeatDefaults] section:
# don't sleep the screen
xserver-command=X -s 0 dpms