[QLI2.0] [qcs9100-ride] Aquantia AQR115C driver probe failed

[sgaud-quic]

Aquantia AQR115C driver probe failed
Board : qcs9100-ride
Kernel : qcom-6.18.y
LAVA : https://lava.infra.foundries.io/scheduler/job/413859

[   15.980388] Aquantia AQR115C stmmac-0:08: failed to read firmware-name: -22
[   16.001396] Aquantia AQR115C stmmac-0:08: probe with driver Aquantia AQR115C failed with error -22

[ayaan-anwar]

[ 15.980388] Aquantia AQR115C stmmac-0:08: failed to read firmware-name: -22
[ 16.001396] Aquantia AQR115C stmmac-0:08: probe with driver Aquantia AQR115C failed with error -22

This is because its a Ride Rev 2 board even though the build loads the Rev 3 DTB:

Machine model: Qualcomm Technologies, Inc. Lemans Ride Rev3

Rev 2 boards don't have the AQR115C PHY, which causes this failure. Can we switch to Rev3 boards for all ethernet testing?

[lumag]

cc Milosz Wasilewski (@mwasilew) Naresh Kamboju (@nareshkamboju)

[ayaan-anwar]

Hi, it would be really helpful if we can get the MCNs of the Lemans Ride devices in the current LAVA pool. As Rev 2 and Rev 3 boards are identical apart from the PHY, there has been a lot of mix-ups in the procurement process in the past.

[lumag]

As far as I understand:

• Cambridge, MCN 10-32722-0801, which means 'ADP RIDE 4.0 SX'
• Hyderabad, MCN 10-32722-9261 which is 'LEMANSAU QAM8775P V2'