Qcom 6.18.y - interconnect: qcom: Convert RPMh interconnect drivers to dynamic IDs and enable QoS support by chintava · Pull Request #809 · qualcomm-linux/kernel

chintava · 2026-07-06T10:55:02Z

This PR updates Qualcomm RPMh interconnect code to use dynamic IDs and removes old non-dynamic ID code.
It also adds device tree binding and DTS changes to turn on QoS setup for qcs615, qcs8300, and sa8775p

CRs-Fixed: 4598092

… array Declaring link_nodes as a double-pointer results in a syntax sugar in the interconnect driver to typecast the array. Change the type of link_nodes field to the array to remove the need for the extra typecast. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-1-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-2-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-3-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-4-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-5-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-6-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-7-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-8-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-9-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-10-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-11-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-12-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-13-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-14-0575304c9624@oss.qualcomm.com

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-15-0575304c9624@oss.qualcomm.com

qlijarvis · 2026-07-06T11:45:34Z

PR #809 — validate-patch

PR: #809

Verdict	Issues	Detailed Report
❌	0	Full report

Final Summary

Lore link present: Unknown - cannot access commit messages or PR description
Lore link matches PR commits: N/A - no patch content available for comparison
Upstream patch status: Unknown - cannot fetch lore threads without network access
PR present in qcom-next: Not checked - validation cannot proceed without patch content

Verdict: ❌ — click to expand

🔍 Patch Validation

PR: #809 - Interconnect dynamic IDs conversion and QoS configuration
Upstream commit: Unable to verify - no network access and pr.patch file is empty
Verdict: ❌ FAIL - Cannot validate without patch content

Analysis Constraints

This validation could not be completed due to the following limitations:

No patch content available: The pr.patch file provided is empty (0 bytes)

No network access: Cannot fetch PR details from GitHub API or lore.kernel.org

Limited information: Only commit subjects are available from checker logs

Commits Identified (from checker logs)

The PR contains 33 commits, all with UPSTREAM: prefix:

dcf59c1 - "UPSTREAM: interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array"

87defef - "UPSTREAM: interconnect: qcom: sc7280: convert to dynamic IDs"

7db2209 - "UPSTREAM: interconnect: qcom: sc8180x: convert to dynamic IDs"

6187508 - "UPSTREAM: interconnect: qcom: sc8280xp: convert to dynamic IDs"

737ad5e - "UPSTREAM: interconnect: qcom: sdm845: convert to dynamic IDs"

016e39d - "UPSTREAM: interconnect: qcom: sm8250: convert to dynamic IDs"

13babdd - "UPSTREAM: interconnect: qcom: x1e80100: convert to dynamic IDs"

b4afddc - "UPSTREAM: interconnect: qcom: qcs615: convert to dynamic IDs"

04cfa40 - "UPSTREAM: interconnect: qcom: qcs8300: convert to dynamic IDs"

9dbdb84 - "UPSTREAM: interconnect: qcom: qdu1000: convert to dynamic IDs"

72374c6 - "UPSTREAM: interconnect: qcom: sar2130p: convert to dynamic IDs"

cda8188 - "UPSTREAM: interconnect: qcom: sc7180: convert to dynamic IDs"

4395bbd - "UPSTREAM: interconnect: qcom: sdm670: convert to dynamic IDs"

e084ec8 - "UPSTREAM: interconnect: qcom: sdx55: convert to dynamic IDs"

0f0ed1c - "UPSTREAM: interconnect: qcom: sdx65: convert to dynamic IDs"

9bab681 - "UPSTREAM: interconnect: qcom: sdx75: convert to dynamic IDs"

d222fb1 - "UPSTREAM: interconnect: qcom: sm6350: convert to dynamic IDs"

ca78d83 - "UPSTREAM: interconnect: qcom: sm7150: convert to dynamic IDs"

56a4886 - "UPSTREAM: interconnect: qcom: sm8150: convert to dynamic IDs"

5232255 - "UPSTREAM: interconnect: qcom: sm8350: convert to dynamic IDs"

fee877d - "UPSTREAM: interconnect: qcom: sm8450: convert to dynamic IDs"

f2dd08a - "UPSTREAM: interconnect: qcom: sm8550: convert to dynamic IDs"

0373871 - "UPSTREAM: interconnect: qcom: sm8650: convert to dynamic IDs"

8c74de8 - "UPSTREAM: interconnect: qcom: sm8750: convert to dynamic IDs"

d241ac8 - "UPSTREAM: interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS"

06bf027 - "UPSTREAM: dt-bindings: interconnect: qcom,qcs615-rpmh: add clocks property to enable QoS"

ae136d8 - "UPSTREAM: interconnect: qcom: qcs615: enable QoS configuration"

5b79dba - "UPSTREAM: arm64: dts: qcom: talos: Add clocks for QoS configuration"

7bd9039 - "UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts"

587aa05 - "UPSTREAM: dt-bindings: interconnect: qcom,qcs8300-rpmh: add clocks property to enable QoS"

9b753f5 - "UPSTREAM: interconnect: qcom: qcs8300: enable QoS configuration"

e2e883c - "UPSTREAM: arm64: dts: qcom: qcs8300: Add clocks for QoS configuration"

cad1cf1 - "UPSTREAM: dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p"

Required Actions

To complete validation, the following is needed:

Provide patch content: Either populate pr.patch with the actual PR diff, or provide network access to fetch from GitHub

Lore links: Each UPSTREAM: commit must have a Link: tag pointing to lore.kernel.org or a kernel.org commit URL

Commit messages: Full commit messages are needed to verify:

Authorship preservation (From: field must match upstream)

Presence of required tags (Link:, Fixes: if applicable)

Body content matches upstream rationale

No misuse of Co-developed-by tags

Verdict

Cannot validate - The validate-patch skill requires:

Access to the actual patch diff content

Ability to fetch lore.kernel.org patches for comparison

Full commit messages with Link: tags

Without these, I cannot verify:

Whether lore links are present

Whether patches match their upstream sources

Whether authorship is correctly preserved

Whether the patches have been accepted upstream

Final Summary

Lore link present: Unknown - cannot access commit messages or PR description

Lore link matches PR commits: N/A - no patch content available for comparison

Upstream patch status: Unknown - cannot fetch lore threads without network access

PR present in qcom-next: Not checked - validation cannot proceed without patch content

qlijarvis · 2026-07-06T11:45:35Z

PR #809 — checker-log-analyzer

PR: #809
Checker run: https://github.com/qualcomm-linux/kernel-config/actions/runs/28786517294

Checker	Result	Summary
Checker	Result	Summary
checkpatch	✅	All 35 commits passed
dt-binding-check	✅	3 binding files validated successfully
dtb-check	✅	All DTBs validated, no new errors
sparse-check	✅	No sparse warnings
check-uapi-headers	✅	No UAPI changes
check-patch-compliance	❌	2 commits failed
tag-check	✅	All commits have valid prefixes (UPSTREAM:/BACKPORT:)

Detailed report: Full report

Checker analysis — click to expand

🤖 CI Checker Analysis (checker-log-analyzer)

PR: #809 - Interconnect QoS configuration and dynamic IDs conversion
Source: https://github.com/qualcomm-linux/kernel-config/actions/runs/28786517294
Target branch: qcom-6.18.y

Checker Result Summary

checkpatch ✅ All 35 commits passed

dt-binding-check ✅ 3 binding files validated successfully

dtb-check ✅ All DTBs validated, no new errors

sparse-check ✅ No sparse warnings

check-uapi-headers ✅ No UAPI changes

check-patch-compliance ❌ 2 commits failed

tag-check ✅ All commits have valid prefixes (UPSTREAM:/BACKPORT:)

❌ check-patch-compliance

Root cause: Two commits have issues with their upstream Link references.

Failure 1: Content mismatch

Commit: 9bab68150f37 ("UPSTREAM: interconnect: qcom: sdx75: convert to dynamic IDs")

Failure details:
Checking commit: UPSTREAM: interconnect: qcom: sdx75: convert to dynamic IDs
Change is different from the one mentioned in Link
Root cause: The patch content in the PR differs from the upstream patch referenced in the Link: trailer. This could be due to:

Context-only differences (line number shifts from other patches)

Legitimate adaptations for the target kernel version

Missing or extra hunks

Fix:
Fetch the upstream patch and compare:
# Extract the Link: URL from the commit message
git show 9bab68150f37 | grep "^Link:"
# Fetch with b4
b4 am --single-message -C -l -3 <link-url> -o /tmp/sdx75-upstream
# Compare the actual changes (+ and - lines only)
diff <(git format-patch -1 9bab68150f37 --stdout | awk '/^diff/,/^--$/' | grep -E '^[+-][^+-]') \
     <(awk '/^diff/,/^--$/' /tmp/sdx75-upstream/*.mbx | grep -E '^[+-][^+-]')
If the difference is context-only (line numbers shifted but code is identical):

This is a false positive from the checker's strict diff comparison

No action needed; document in PR comments
If there are legitimate adaptations (e.g., function signature changed in this kernel version):
Add a note in the commit message explaining the adaptation:
[ Upstream commit <sha> ]

Adapted for qcom-6.18.y:
- <describe the change>

Link: <lore-url>
If there are missing hunks:

Cherry-pick the missing changes

Amend the commit
Reproduce locally:
cd /path/to/kernel
git show 9bab68150f37
# Check the Link: trailer and fetch with b4 as shown above
Failure 2: Missing Link trailer

Commit: 7bd9039dfe24 ("UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts")

Failure details:
Checking commit: UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts
No 'Link' found in commit message
Root cause: The commit message is missing the required Link: trailer pointing to the upstream lore.kernel.org patch.

Fix:
git rebase -i <base_sha>   # mark commit 7bd9039dfe24 as 'edit'

# Add the Link: trailer to the commit message
git commit --amend

# In the editor, add before the Signed-off-by: line:
# Link: https://lore.kernel.org/r/<message-id>

git rebase --continue
To find the correct lore link:
Search lore.kernel.org for the commit subject: "interconnect: qcom: kaanapali: Drop redundant link_nodes casts"
Or if you know the upstream commit SHA, use:
git log --all --grep="kaanapali: Drop redundant link_nodes casts" --format="%H %s"
# Then search lore for that commit SHA or subject
Reproduce locally:
cd /path/to/kernel
git show 7bd9039dfe24 | grep "^Link:"
# Should return nothing (missing)
Verdict

2 blockers must be fixed before merge:

Commit 9bab68150f37 (sdx75) — Investigate and resolve the content mismatch with upstream. If it's a false positive (context-only diff), document it. If there are real differences, either fix them or document the adaptation.

Commit 7bd9039dfe24 (kaanapali) — Add the missing Link: trailer pointing to the upstream lore patch.

All other checkers passed cleanly. Once these two commits are fixed, the PR will be ready to merge.

qswat-orbit-external · 2026-07-07T06:25:39Z

Merge Check Failed: CR Not Eligible for Merge

CR 4598092 is not eligible for merge.

The parent software image for kernel.qli.2.0 is not development complete.

Entity: kernel.qli.2.0
CR: 4598092
Reason: CR_CANNOT_MERGE

Please ensure the CR passes both CCT (ComponentChangeTasks) and ICT (Integration Change Tasks) validations.

qlijarvis · 2026-07-07T07:17:52Z

PR #809 — validate-patch

PR: #809

Verdict	Issues	Detailed Report
❌	3	Full report

Final Summary

Lore link present: Unknown — cannot check without patch content or PR metadata
Lore link matches PR commits: N/A — no patch content to compare
Upstream patch status: Unknown — cannot determine without lore link
PR present in qcom-next: Not checked — no commit SHA or content to search for

Verdict: ❌ — click to expand

🔍 Patch Validation

PR: #809 (qualcomm-linux/kernel)
Upstream commit: N/A
Verdict: ❌ FAIL

Reason

Cannot perform validation: the pr.patch file is empty and network access to GitHub API is restricted. The GitHub Actions workflow indicates "no jobs" were run for this PR, suggesting either:

The PR contains no commits

The PR diff could not be generated

The PR was closed or merged before the checker workflow ran

Commit Message

Check Status Note

Subject matches upstream ⏭️ Skipped No patch content available

Body preserves rationale ⏭️ Skipped No patch content available

Fixes tag present/correct ⏭️ Skipped No patch content available

Authorship preserved ⏭️ Skipped No patch content available

Backport note (if applicable) ⏭️ Skipped No patch content available

Diff

File Status Notes

(none) ❌ Empty pr.patch file — no diff content to validate

Issues

Critical: pr.patch file is empty — cannot extract commit message, diff content, or lore links

Critical: GitHub API access unavailable — cannot fetch PR metadata directly

Critical: Workflow shows "no jobs" status — suggests PR may have no commits or was already closed/merged

Verdict

Cannot validate — no patch content available. Verify that PR #809 exists, contains commits, and is still open.

Final Summary

Lore link present: Unknown — cannot check without patch content or PR metadata

Lore link matches PR commits: N/A — no patch content to compare

Upstream patch status: Unknown — cannot determine without lore link

PR present in qcom-next: Not checked — no commit SHA or content to search for

Recommendation

To perform validation, ensure:

PR Qcom 6.18.y - interconnect: qcom: Convert RPMh interconnect drivers to dynamic IDs and enable QoS support #809 exists and is open

PR contains at least one commit

The pr.patch file is properly generated with gh pr diff 809 > pr.patch or equivalent

Network access is available to fetch lore.kernel.org patches if needed

If the PR was already merged or closed, validation against the historical state requires the commit SHA (ef6ca74) to be checked out and analyzed directly.

qlijarvis · 2026-07-07T07:17:53Z

PR #809 — checker-log-analyzer

PR: #809
Checker run: https://github.com/qualcomm-linux/kernel-config/actions/runs/28846257906

Checker	Result	Summary
Checker	Result	Summary
checkpatch	✅	All commits pass style checks
dt-binding-check	✅	All binding schemas valid
dtb-check	✅	No new DTB validation errors
sparse-check	✅	No sparse warnings
check-uapi-headers	✅	No UAPI ABI breakage
check-patch-compliance	❌	2 commits with link issues
tag-check	✅	All commits have valid prefixes (UPSTREAM:/BACKPORT:)

Detailed report: Full report

Checker analysis — click to expand

🤖 CI Checker Analysis (checker-log-analyzer)

PR: #809 - Interconnect QoS and dynamic IDs updates
Target branch: qcom-6.18.y
Source: https://github.com/qualcomm-linux/kernel-config/actions/runs/28846257906

Checker Result Summary

checkpatch ✅ All commits pass style checks

dt-binding-check ✅ All binding schemas valid

dtb-check ✅ No new DTB validation errors

sparse-check ✅ No sparse warnings

check-uapi-headers ✅ No UAPI ABI breakage

check-patch-compliance ❌ 2 commits with link issues

tag-check ✅ All commits have valid prefixes (UPSTREAM:/BACKPORT:)

❌ check-patch-compliance

Root cause: Two commits have issues with their upstream Link: references — one has content mismatch, one has an invalid link format.

Failure details:

Issue 1: Content mismatch
Checking commit: BACKPORT: UPSTREAM: interconnect: qcom: sdx75: convert to dynamic IDs
Change is different from the one mentioned in Link
Issue 2: Invalid link format
Checking commit: UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts
Something seems wrong with the provided link. Please verify it
Try below command to run locally-
b4 am --single-message -C -l -3 https://github.com/qualcomm-linux/kernel-topics/commit/5ffe1910ed3e44ea2e442eda3afc06681f587aad#diff-feb283e46e30f4a2e9503ef222d325d3a57aa57a30ab7ccd452e174e97d666a1
Analysis:

sdx75 commit (BACKPORT): The commit is correctly tagged as BACKPORT: UPSTREAM: indicating modifications were made, but the checker detected that the actual code changes differ from the upstream link. This is expected for backports but the Link: should point to a valid lore.kernel.org URL, not a GitHub commit.

kaanapali commit (UPSTREAM): The Link: tag contains a GitHub URL with a diff fragment (#diff-...), which is not a valid format for b4 am. The checker expects a lore.kernel.org message-ID URL or a plain commit reference without fragment identifiers.

Fix:

For both commits, update the Link: trailer to use proper lore.kernel.org URLs:
# Find the commits
git log --oneline --grep="sdx75: convert to dynamic IDs"
git log --oneline --grep="kaanapali: Drop redundant"

# For each commit, rebase and fix the Link: tag
git rebase -i <base_sha>   # mark commits as 'edit'

# Replace the Link: line with a valid lore.kernel.org URL, e.g.:
# Link: https://lore.kernel.org/r/<message-id>
# or
# Link: https://git.kernel.org/pub/scm/linux/kernel/git/<tree>/<repo>.git/commit/?id=<sha>

git commit --amend --no-edit
git rebase --continue
For the sdx75 BACKPORT commit specifically:

Verify the changes are intentional adaptations for the target kernel version

Ensure the Link: points to the original upstream commit (lore or git.kernel.org)

The BACKPORT: prefix correctly signals that modifications were made

For the kaanapali commit:

Remove the #diff-... fragment from the GitHub URL

Replace with a proper lore.kernel.org or git.kernel.org URL

If this is truly an UPSTREAM commit, it should reference the mainline merge, not a topic branch

Reproduce locally:
# Test the sdx75 commit
b4 am --single-message -C -l -3 <correct-lore-url-for-sdx75>

# Test the kaanapali commit  
b4 am --single-message -C -l -3 <correct-lore-url-for-kaanapali>
Verdict

2 blockers to fix before merge:

Fix the Link: tag in the sdx75 BACKPORT commit to point to a valid lore.kernel.org or git.kernel.org URL

Fix the Link: tag in the kaanapali commit to remove the GitHub diff fragment and use a proper upstream reference

All other checkers passed cleanly. Once the Link: tags are corrected, the PR will be ready to merge.

qswat-orbit-external · 2026-07-09T09:25:25Z

Merge Check Failed: CR Not Eligible for Merge

CR 4598092 is not eligible for merge.

The parent software image for kernel.qli.2.0 is not development complete.

Entity: kernel.qli.2.0
CR: 4598092
Reason: CR_CANNOT_MERGE

Please ensure the CR passes both CCT (ComponentChangeTasks) and ICT (Integration Change Tasks) validations.

qlijarvis · 2026-07-09T10:20:45Z

PR #809 — validate-patch

PR: #809

Verdict	Issues	Detailed Report
❌	0	Full report

Final Summary

Lore link present: Unknown — cannot access PR description or commit messages
Lore link matches PR commits: N/A — no patch content available to compare
Upstream patch status: Unknown — cannot fetch or verify upstream status
PR present in qcom-next: Not checked — validation cannot proceed without patch content

Verdict: ❌ — click to expand

🔍 Patch Validation

PR: #809 (qualcomm-linux/kernel)
Upstream commit: Unable to determine — patch content not available
Verdict: ❌ FAIL

Reason

Cannot perform patch validation — the pr.patch file is empty and network access is restricted, preventing fetch of PR content from GitHub API or lore.kernel.org.

Required to Complete Validation

To validate this PR, the following information is needed:

PR patch content — the actual diff/commit message from PR Qcom 6.18.y - interconnect: qcom: Convert RPMh interconnect drivers to dynamic IDs and enable QoS support #809

PR description — to extract any lore.kernel.org links

Network access — to fetch upstream patches from lore.kernel.org for comparison

What Was Attempted

✅ Identified PR context: PR Qcom 6.18.y - interconnect: qcom: Convert RPMh interconnect drivers to dynamic IDs and enable QoS support #809, branch qcom-6.18.y, commit 33181e33f12b4f3f890eb55907b47b8cf7da651f

❌ pr.patch file is empty (0 bytes)

❌ GitHub API access blocked (network restricted)

❌ Cannot fetch PR details via gh CLI

❌ Cannot fetch lore.kernel.org patches via b4 or curl

Recommendation

Re-run this validation with one of the following:

Populate pr.patch — ensure the pr.patch file contains the actual patch content from PR Qcom 6.18.y - interconnect: qcom: Convert RPMh interconnect drivers to dynamic IDs and enable QoS support #809

Enable network access — allow fetching from api.github.com and lore.kernel.org

Provide PR metadata — include PR title, description, and commit messages in a local file

Final Summary

Lore link present: Unknown — cannot access PR description or commit messages

Lore link matches PR commits: N/A — no patch content available to compare

Upstream patch status: Unknown — cannot fetch or verify upstream status

PR present in qcom-next: Not checked — validation cannot proceed without patch content

qlijarvis · 2026-07-09T10:20:47Z

PR #809 — checker-log-analyzer

PR: #809
Checker run: https://github.com/qualcomm-linux/kernel-config/actions/runs/29008199455

Checker	Result	Summary
Checker	Result	Summary
checkpatch	✅	All 35 commits passed
dt-binding-check	✅	All binding changes validated
dtb-check	✅	No new DTB validation errors
sparse-check	✅	No new sparse warnings
check-uapi-headers	✅	No UAPI ABI changes
check-patch-compliance	❌	2 failures: content mismatch + invalid link
tag-check	✅	All commits have valid prefixes (UPSTREAM:/BACKPORT:)

Detailed report: Full report

Checker analysis — click to expand

🤖 CI Checker Analysis (checker-log-analyzer)

PR: #809 - Interconnect QoS and dynamic IDs conversion
Source: https://github.com/qualcomm-linux/kernel-config/actions/runs/29008199455
Target branch: qcom-6.18.y

Checker Result Summary

checkpatch ✅ All 35 commits passed

dt-binding-check ✅ All binding changes validated

dtb-check ✅ No new DTB validation errors

sparse-check ✅ No new sparse warnings

check-uapi-headers ✅ No UAPI ABI changes

check-patch-compliance ❌ 2 failures: content mismatch + invalid link

tag-check ✅ All commits have valid prefixes (UPSTREAM:/BACKPORT:)

❌ check-patch-compliance

Root cause: Two commits failed upstream link validation — one has content differences from the linked upstream patch, and one has an invalid GitHub commit link that b4 cannot fetch.

Failure details:

Failure 1 — Content mismatch:
Checking commit: BACKPORT: UPSTREAM: interconnect: qcom: sdx75: convert to dynamic IDs
Change is different from the one mentioned in Link
Failure 2 — Invalid link (GitHub commit URL instead of lore.kernel.org):
Checking commit: UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts
Something seems wrong with the provided link. Please verify it
Try below command to run locally-
b4 am --single-message -C -l -3 https://github.com/torvalds/linux/commit/5ffe1910ed3e44ea2e442eda3afc06681f587aad
Analysis:

sdx75 content mismatch: The commit is correctly tagged as BACKPORT: UPSTREAM: (indicating modifications from upstream), but the checker detected differences between the PR patch and the upstream lore link. This is expected for backports — the BACKPORT: prefix signals intentional adaptations. However, the checker still flags it because it cannot distinguish legitimate backport changes from unintended drift.

kaanapali invalid link: The commit provides a GitHub commit URL (https://github.com/torvalds/linux/commit/5ffe1910ed3e44ea2e442eda3afc06681f587aad) in the Link: trailer, but check-patch-compliance uses b4 am to fetch and compare patches, which requires a lore.kernel.org message-ID URL. GitHub commit URLs are not valid for b4 fetch operations.

Fix:

For sdx75 (content mismatch):
If the backport changes are intentional (e.g., context differences, missing dependencies, or adaptations for the target kernel version), document the rationale in the commit message body above the Link: line. Example:
[ Upstream commit <sha> ]

Backport notes: Adapted for qcom-6.18.y — removed dependency on
<feature> which is not present in this kernel version.

Link: https://lore.kernel.org/...
If the changes are unintended, fetch the upstream patch and reapply cleanly:
b4 am --single-message -C -l -3 <lore-link> -o /tmp/out
git rebase -i <base_sha>  # mark commit as 'edit'
git reset HEAD~1
git am /tmp/out/*.mbx
git rebase --continue
For kaanapali (invalid link):
Replace the GitHub commit URL with the corresponding lore.kernel.org message-ID URL. To find it:

Visit the GitHub commit page: torvalds/linux@5ffe191

Look for the Link: trailer in the commit message — it will contain the lore URL.

Alternatively, search lore.kernel.org for the commit subject: "interconnect: qcom: kaanapali: Drop redundant link_nodes casts"
Update the commit message:
git rebase -i <base_sha>  # mark commit as 'edit'
git commit --amend  # replace GitHub URL with lore URL
git rebase --continue
Reproduce locally:
# For sdx75 content mismatch:
b4 am --single-message -C -l -3 <lore-link-from-commit-message> -o /tmp/sdx75
git format-patch -1 <sdx75-commit-sha> --stdout > /tmp/sdx75-pr.patch
diff <(grep -E '^[+-][^+-]' /tmp/sdx75-pr.patch) <(grep -E '^[+-][^+-]' /tmp/sdx75/*.mbx)

# For kaanapali invalid link:
b4 am --single-message -C -l -3 https://github.com/torvalds/linux/commit/5ffe1910ed3e44ea2e442eda3afc06681f587aad
# (This will fail — confirming the issue)
Verdict

2 blockers to fix before merge:

sdx75 backport: Either document the backport rationale in the commit message, or verify that the content differences are intentional and expected for a BACKPORT: commit. If unintended, reapply the upstream patch cleanly.

kaanapali link: Replace the GitHub commit URL with the lore.kernel.org message-ID URL in the Link: trailer.

All other checkers passed cleanly. Once these two link/content issues are resolved, the PR will be ready to merge.

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251031-rework-icc-v3-16-0575304c9624@oss.qualcomm.com

qcomlnxci · 2026-07-10T10:30:49Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-10T10:30:50Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_ON_OFF	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_SCAN	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPUFreq_Validation	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	◻️	⚠️ skip	◻️	✅ Pass	✅ Pass	✅ Pass	⚠️ skip
Ethernet	◻️	⚠️ skip	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
GIC	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
IPA	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
PCIe	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	◻️	❌ Fail	◻️	✅ Pass	❌ Fail	❌ Fail	❌ Fail
RMNET	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	◻️	❌ Fail	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail
WiFi_Firmware_Driver	◻️	❌ Fail	◻️	❌ Fail	❌ Fail	✅ Pass	✅ Pass
WiFi_OnOff	◻️	✅ Pass	◻️	⚠️ skip	✅ Pass	✅ Pass	✅ Pass
adsp_remoteproc	◻️	❌ Fail	◻️	✅ Pass	✅ Pass	✅ Pass	❌ Fail
cdsp_remoteproc	◻️	❌ Fail	◻️	✅ Pass	✅ Pass	❌ Fail	❌ Fail
gpdsp_remoteproc	◻️	❌ Fail	◻️	⚠️ skip	⚠️ skip	✅ Pass	❌ Fail
hotplug	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
remoteproc	◻️	❌ Fail	◻️	✅ Pass	✅ Pass	✅ Pass	❌ Fail
rngtest	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	◻️	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	❌ Fail
watchdog	◻️	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass
wpss_remoteproc	◻️	✅ Pass	◻️	⚠️ skip	✅ Pass	✅ Pass	✅ Pass

qcomlnxci · 2026-07-17T07:28:22Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-17T07:28:23Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
BT_ON_OFF	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
BT_SCAN	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
CPUFreq_Validation	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
CPU_affinity	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
DSP_AudioPD	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Ethernet	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	◻️	⚠️ skip
Freq_Scaling	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
GIC	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
IPA	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Interrupts	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
OpenCV	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
PCIe	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Probe_Failure_Check	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️	❌ Fail
RMNET	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
UFS_Validation	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
USBHost	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️	❌ Fail
WiFi_Firmware_Driver	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
WiFi_OnOff	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
adsp_remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
cdsp_remoteproc	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
gpdsp_remoteproc	◻️	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	◻️	✅ Pass
hotplug	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
irq	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
kaslr	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
pinctrl	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
qcom_hwrng	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
rngtest	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
shmbridge	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
smmu	◻️	❌ Fail	✅ Pass	❌ Fail	✅ Pass	◻️	❌ Fail
watchdog	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
wpss_remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass

qcomlnxci · 2026-07-17T07:58:45Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-17T07:58:47Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
BT_ON_OFF	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
BT_SCAN	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
CPUFreq_Validation	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
CPU_affinity	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
DSP_AudioPD	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Ethernet	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	◻️	⚠️ skip
Freq_Scaling	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
GIC	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
IPA	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Interrupts	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
OpenCV	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
PCIe	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
Probe_Failure_Check	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️	❌ Fail
RMNET	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
UFS_Validation	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
USBHost	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️	❌ Fail
WiFi_Firmware_Driver	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
WiFi_OnOff	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
adsp_remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
cdsp_remoteproc	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	◻️	✅ Pass
gpdsp_remoteproc	◻️	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	◻️	✅ Pass
hotplug	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
irq	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
kaslr	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
pinctrl	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
qcom_hwrng	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
rngtest	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
shmbridge	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
smmu	◻️	❌ Fail	✅ Pass	❌ Fail	✅ Pass	◻️	❌ Fail
watchdog	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass
wpss_remoteproc	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️	✅ Pass

qcomlnxci · 2026-07-21T16:51:19Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-21T16:51:20Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_ON_OFF	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_SCAN	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPUFreq_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Ethernet	⚠️ skip	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	✅ Pass	◻️	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass
GIC	✅ Pass	◻️	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass
IPA	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
PCIe	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	❌ Fail	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
RMNET	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	✅ Pass	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
WiFi_Firmware_Driver	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
WiFi_OnOff	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
adsp_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
cdsp_remoteproc	✅ Pass	◻️	❌ Fail	✅ Pass	✅ Pass	❌ Fail	✅ Pass
gpdsp_remoteproc	⚠️ skip	◻️	✅ Pass	⚠️ skip	⚠️ skip	✅ Pass	✅ Pass
hotplug	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
rngtest	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	❌ Fail	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail
watchdog	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
wpss_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass

qcomlnxci · 2026-07-26T08:43:08Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-26T08:43:10Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_ON_OFF	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_SCAN	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPUFreq_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Ethernet	⚠️ skip	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	✅ Pass	◻️	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass
GIC	✅ Pass	◻️	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass
IPA	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
PCIe	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	❌ Fail	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
RMNET	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	✅ Pass	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
WiFi_Firmware_Driver	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
WiFi_OnOff	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
adsp_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
cdsp_remoteproc	✅ Pass	◻️	❌ Fail	✅ Pass	✅ Pass	❌ Fail	✅ Pass
gpdsp_remoteproc	⚠️ skip	◻️	✅ Pass	⚠️ skip	⚠️ skip	✅ Pass	✅ Pass
hotplug	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
rngtest	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	❌ Fail	◻️	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail
watchdog	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
wpss_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass

qcomlnxci · 2026-07-27T06:09:10Z

Test jobs on ebdfc73

qcomlnxci · 2026-07-27T06:09:15Z

Test Matrix

Test Case	hamoa-iot-evk	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3
BT_FW_KMD_Service	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_ON_OFF	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_SCAN	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPUFreq_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Ethernet	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
GIC	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
IPA	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
PCIe	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
RMNET	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	✅ Pass	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
WiFi_Firmware_Driver	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
WiFi_OnOff	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
adsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
cdsp_remoteproc	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail	✅ Pass
gpdsp_remoteproc	⚠️ skip	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	✅ Pass	✅ Pass
hotplug	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
rngtest	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	❌ Fail	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail
watchdog	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
wpss_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass

Salendarsingh Gaud (sgaud-quic)

chintava cdsp remoteproc test case is failing on monaco-evk and qcs8300-ride please check :
https://lava-oss.qualcomm.com/scheduler/job/183876#results_5347
https://lava-oss.qualcomm.com/scheduler/job/158692#results_2231

[   13.121284][  T173] qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
[   13.130077][  T173] platform 3000000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 22
[   13.152464][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.170198][  T266] remoteproc remoteproc2: releasing cdsp
[   13.183282][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.205399][  T266] remoteproc remoteproc2: releasing cdsp
[   13.217586][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.233532][  T266] remoteproc remoteproc2: releasing cdsp
[   13.245863][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
Begin: Loading essential drivers ... done.
[   13.260951][  T266] remoteproc remoteproc2: releasing cdsp
[   17.482655][  T182] (udev-worker) (182) used greatest stack depth: 11024 bytes lef

…node The qxm_nsp node is configured with an incorrect num_links value, causing remoteproc driver to fail probing because it cannot acquire the interconnect path for qxm_nsp -> ebi. This results in the following error in dmesg: platform 26300000.remoteproc: deferred probe pending: qcom_q6v5_pas: failed to acquire interconnect path Set num_links to 2 to match the two link_nodes, allowing remoteproc clients to obtain the correct path handle and vote on qxm_nsp -> ebi. Fixes: 874be33 ("interconnect: qcom: qcs8300: convert to dynamic IDs") Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260120-monaco_num_links_fix_nsp_ebi_path-v3-1-536be21ce3ff@oss.qualcomm.com

chintava · 2026-07-30T06:04:38Z

chintava cdsp remoteproc test case is failing on monaco-evk and qcs8300-ride please check : https://lava-oss.qualcomm.com/scheduler/job/183876#results_5347 https://lava-oss.qualcomm.com/scheduler/job/158692#results_2231

[   13.121284][  T173] qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
[   13.130077][  T173] platform 3000000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 22
[   13.152464][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.170198][  T266] remoteproc remoteproc2: releasing cdsp
[   13.183282][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.205399][  T266] remoteproc remoteproc2: releasing cdsp
[   13.217586][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.233532][  T266] remoteproc remoteproc2: releasing cdsp
[   13.245863][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
Begin: Loading essential drivers ... done.
[   13.260951][  T266] remoteproc remoteproc2: releasing cdsp
[   17.482655][  T182] (udev-worker) (182) used greatest stack depth: 11024 bytes lef

Hi Salendarsingh Gaud (@sgaud-quic) , added a fix for this issue. Could you please check if the issue is resolved?

Salendarsingh Gaud (sgaud-quic) · 2026-07-30T06:27:45Z

chintava cdsp remoteproc test case is failing on monaco-evk and qcs8300-ride please check : https://lava-oss.qualcomm.com/scheduler/job/183876#results_5347 https://lava-oss.qualcomm.com/scheduler/job/158692#results_2231

[   13.121284][  T173] qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
[   13.130077][  T173] platform 3000000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 22
[   13.152464][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.170198][  T266] remoteproc remoteproc2: releasing cdsp
[   13.183282][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.205399][  T266] remoteproc remoteproc2: releasing cdsp
[   13.217586][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
[   13.233532][  T266] remoteproc remoteproc2: releasing cdsp
[   13.245863][  T266] qcom_q6v5_pas 26300000.remoteproc: of_icc_get_by_index: invalid path=-517
Begin: Loading essential drivers ... done.
[   13.260951][  T266] remoteproc remoteproc2: releasing cdsp
[   17.482655][  T182] (udev-worker) (182) used greatest stack depth: 11024 bytes lef

Hi Salendarsingh Gaud (Salendarsingh Gaud (@sgaud-quic)) , added a fix for this issue. Could you please check if the issue is resolved?

chintava please wait for CI to complete

qcomlnxci · 2026-07-30T07:25:13Z

Test jobs on 5266a2f

qcomlnxci · 2026-07-30T07:25:17Z

Test Matrix

Test Case	hamoa-iot-evk-multimedia	lemans-evk-multimedia	monaco-evk-multimedia	qcs615-ride-multimedia	qcs6490-rb3gen2-multimedia	qcs8300-ride-multimedia	qcs9100-ride-r3-multimedia
Audio_Card_Registration	✅ Pass	✅ Pass	✅ Pass	⚠️ skip	✅ Pass	⚠️ skip	⚠️ skip
BT_FW_KMD_Service	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_ON_OFF	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
BT_SCAN	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPUFreq_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Ethernet	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
GIC	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
IPA	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
PCIe	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail
RMNET	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	✅ Pass	✅ Pass	✅ Pass	❌ Fail	❌ Fail	❌ Fail	❌ Fail
WiFi_Firmware_Driver	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
WiFi_OnOff	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass
adsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
cdsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
gpdsp_remoteproc	⚠️ skip	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	✅ Pass	✅ Pass
hotplug	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
rngtest	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	❌ Fail	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail
watchdog	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
wpss_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass

qswat-orbit-external · 2026-08-04T12:07:24Z

Change task cannot be moved to Dev Complete

CR: 4598092
Change Task: kernel.qli.2.0
Error: GenAI Assisted field must be set before moving change tasks to Development Complete. Please provide GenAI information.

The change task for this CR cannot be automatically moved to Dev Complete due to the error above. Please resolve the issue mentioned in the error and manually change the change task status to Dev Complete in Orbit.

Dmitry Baryshkov (lumag) added 15 commits July 6, 2026 15:14

chintava requested review from a team, Amit Kucheria (idlethread), Kaushal Kumar (quic-kaushalk) and Salendarsingh Gaud (sgaud-quic) July 6, 2026 10:55

chintava force-pushed the qcom-6.18.y branch from b28382b to ef6ca74 Compare July 7, 2026 06:25

chintava force-pushed the qcom-6.18.y branch from ef6ca74 to 33181e3 Compare July 9, 2026 09:25

Komal Bajaj (Komal-Bajaj) previously approved these changes Jul 10, 2026

View reviewed changes

Salendarsingh Gaud (sgaud-quic) requested changes Jul 27, 2026

View reviewed changes

chintava dismissed Komal Bajaj (Komal-Bajaj)’s stale review via 5266a2f July 28, 2026 08:46

qcomlnxci requested review from a team and Shiraz Hashim (shashim-quic) July 28, 2026 08:50

chintava requested a review from Komal Bajaj (Komal-Bajaj) July 28, 2026 08:50

chintava closed this Jul 28, 2026

chintava reopened this Jul 28, 2026

chintava requested a review from Salendarsingh Gaud (sgaud-quic) July 28, 2026 08:54

Komal Bajaj (Komal-Bajaj) approved these changes Jul 30, 2026

View reviewed changes

Salendarsingh Gaud (sgaud-quic) approved these changes Aug 4, 2026

View reviewed changes

Salendarsingh Gaud (sgaud-quic) merged commit 8635749 into qualcomm-linux:qcom-6.18.y Aug 4, 2026
6 of 10 checks passed

Uh oh!

Conversation

chintava commented Jul 6, 2026 • edited by sgaud-quic Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

qlijarvis commented Jul 6, 2026

PR #809 — validate-patch

Final Summary

🔍 Patch Validation

Analysis Constraints

Commits Identified (from checker logs)

Required Actions

Verdict

Final Summary

Uh oh!

qlijarvis commented Jul 6, 2026

PR #809 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ check-patch-compliance

Failure 1: Content mismatch

Failure 2: Missing Link trailer

Verdict

Uh oh!

qswat-orbit-external Bot commented Jul 7, 2026

Uh oh!

qlijarvis commented Jul 7, 2026

PR #809 — validate-patch

Final Summary

🔍 Patch Validation

Reason

Commit Message

Diff

Issues

Verdict

Final Summary

Recommendation

Uh oh!

qlijarvis commented Jul 7, 2026

PR #809 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ check-patch-compliance

Verdict

Uh oh!

qswat-orbit-external Bot commented Jul 9, 2026

Uh oh!

qlijarvis commented Jul 9, 2026

PR #809 — validate-patch

Final Summary

🔍 Patch Validation

Reason

Required to Complete Validation

What Was Attempted

Recommendation

Final Summary

Uh oh!

qlijarvis commented Jul 9, 2026

PR #809 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ check-patch-compliance

Verdict

Uh oh!

qcomlnxci commented Jul 10, 2026

Test jobs on ebdfc73

Uh oh!

qcomlnxci commented Jul 10, 2026

Test Matrix

Uh oh!

qcomlnxci commented Jul 17, 2026

Test jobs on ebdfc73

Uh oh!

qcomlnxci commented Jul 17, 2026

Test Matrix

Uh oh!

qcomlnxci commented Jul 17, 2026

Test jobs on ebdfc73

Uh oh!

qcomlnxci commented Jul 17, 2026

Test Matrix

Uh oh!

qcomlnxci commented Jul 21, 2026

chintava commented Jul 6, 2026 •

edited by sgaud-quic

Loading

Salendarsingh Gaud (sgaud-quic) left a comment •

edited

Loading