On a Rpi 1 B+ with a whoping 256MB of RAM, configured as 128/128 split between
GPU and CPU:
Bootable image with minimal system and some dev tools. The main purpose of this build is to serve as a base system for SoFIS. However it can be used for virtually anything.
Profile: default/linux/arm/17.0/armv6j
Kernel+modules: Raspbian 5.4.83+
This project provides bootable SD Card image, based on a 8GB card. This means that your SD Card must be at least (can be bigger) 8GB for this image be written as-is. The image provides the following partitions:
| Partition | Size | Content |
|---|---|---|
| 1 | 268 MB | Boot, from Raspbian |
| 2 | 6.9 GB | Gentoo system |
| 3 | 696 MB | Swap |
WARNING The following instructions can break your system if done improperly. Be sure of the device you are writting to: A mistake here means a wiped hard drive. You have been warned.
We are going to assume that your sd-card is /dev/mmcblkX. Note that we are not
using partitions, but the whole device.
$ wget https://github.com/sam-itt/gentoo-pie/releases/download/0.0.1/sdcard-gentoo.img.xz
$ wget https://github.com/sam-itt/gentoo-pie/releases/download/0.0.1/sdcard-gentoo.img.sha1
$ sha1sum -c sdcard-gentoo.img.xz.sha1
sdcard-gentoo.img.xz: OK
# xzcat sdcard-gentoo.img.xz > /dev/mmcblkX && syncYou can now put the card in your Pi and boot. Login/passwords are:
- pi/pi
- root/pi
Here is a list of installedpackages on top of the default @system set:
- app-misc/pfetch
- sys-devel/gdb
- app-editors/vim
- dev-libs/glib
- dev-vcs/git
- media-libs/libsdl2 (custom ebuild, Rpi OpenGL ES +udev for X-less OpenGL and keyboard)
- media-libs/sdl2-image
- media-libs/sdl2_gpu
- media-libs/raspberrypi-userland (native broadcom OpenGL ES etc.)
- sci-geosciences/gpsd
- sys-apps/i2c-tools
- sys-devel/distcc
- app-portage/eix
- app-portage/gentoolkit
- net-misc/dhcpcd
- net-misc/ntp
- net-misc/telnet-bsd
- sys-apps/rng-tools
- sys-power/cpupower