rpirrigation

raspberry pi scheduled irrigation with relays and electrovalve Controls GPIO pins 5,6,13,19 connected trough relays to 4 waterring electrovalves
Put the irrigation.py and irrigation_config.yml in /home/pi Modify yaml file as you needed

Run is as service at startup:

1. Create file to Define the service and add below content $sudo nano /lib/systemd/system/irrigation.service

   [Unit] Description=Test Sevice After=multi-user.target

    [Service]
    Type=simple
    ExecStart=/usr/bin/python /home/pi/irrigation.py
    Restart=on-abort
   
    [Install]
    WantedBy=multi-user.target
   

2. Activate the service $sudo chmod 644 /lib/systemd/system/irrigation.service $chmod +x /home/pi/irrigation.py $sudo systemctl daemon-reload $sudo systemctl enable irrigation.service

   Start service $sudo systemctl start irrigation.service

   Check service status $sudo systemctl status irrigation.service