T3 Gemstone O1 is a high-performance 64-bit quad-core single board computer designed for AI, vision, and embedded edge applications.
It integrates GPU, DSP, and dedicated AI accelerators for demanding workloads while maintaining low power consumption.
🔗 Learn more or purchase at t3gemstone.org
The T3 Gemstone O1 is an all-in-one embedded platform built for developers, researchers, and industrial applications requiring advanced multimedia, connectivity, and AI capabilities.
With a 64-bit ARM architecture and TI system-on-chip foundation, it offers rich interfaces for sensors, cameras, and displays — making it ideal for robotics, computer vision, and edge AI systems.
| Feature | Description |
|---|---|
| Processor | Quad-core ARM Cortex-A53 @1.4 GHz with integrated GPU DSP and AI accelerators |
| Memory | 4 GB LPDDR4 RAM |
| Wi-Fi | Wi-Fi 802.11n (WL1835MOD) |
| Bluetooth | Bluetooth 5.1 (BLE) |
| Onboard Storage | 32 GB onboard eMMC (High-speed onboard flash storage) , 512Kbit EEPROM (I2C-compatible serial EEPROM for configuration storage) |
| Storage | microSD slot (Supports high-speed SDR104 mode), M.2 2280 SSD Port (Supports high-capacity NVMe SSD) |
| USB Ports | 2 × USB 3.0 Type-A (5 Gbps), 1 × USB 2.0 Type-A, 1 × USB 2.0 Type-C (Device + PD support) |
| Ethernet | Gigabit Ethernet |
| Display / Camera | 1 x 4-lane MIPI camera/display transceivers (Supports wide range of touch displays such as Raspberry Pi 7” or Waveshare 7” and 10.1” displays) , 1 x 4-lane MIPI camera (Supports wide range of camera modules such as Raspberry Pi Camera V2) |
| Display Output | 1 x HDMI display |
| Expansion Connector | 40-pin GPIO Header (Default pinout is compatible with Raspberry Pi) |
| JTAG Connect | 1 x JTAG (ARM Cortex 10-pin JTAG connector for debugging Cortex-R5 MCU cores) |
| Real-time Clock (RTC) | Maxim DS1340 (I2C RTC module with external battery connector (2-pin JST SH)) |
| CAN Bus | CAN FD transceiver for automotive applications |
| Debug UART | 3-pin 2.54mm connector provides access to serial console for debugging and system management |
| Power | USB Type-C Power (5-9V / 3A), DC Power Connector (5-12V / 5A) |
| Power button | On/Off included |
| Programmable Button | User-configurable button |
| Fan connector | 4-pin JST SH connector for active cooling solutions with PWM fan control |
| Boot Mode Switch | Hardware switch for selecting different boot modes and configurations |
| Motion Sensing Sensor | InvenSense ICM-20948 (9-Axis MEMS MotionTracking sensor with accelerometer, gyroscope, and magnetometer) |
| Environmental Monitoring Sensors | Bosch BMP390 (24-bit barometric pressure sensor) , TI HDC2010 (Humidity and temperature sensor) |
We welcome contributions, community projects, and feedback!
Visit our Community or contact us via support@t3gemstone.org