Note
We suffered a small disruption but the repo has been restored from local backups!
A lot of time, love, coffee & lack of sleep testing has been poured into these macros! They have all been written 100% by a human! Fully ai code Free! No ai has been used to create them!
Made to make your printing life easier & your printer SMARTER!
These macros will run on almost any COREXY or BED SLINGER (cartesian) Klipper printer with no changes needed to the macro files!
Small user setting changes will be required of course.
These macros have been developed for use on almost anything from Voron printers to an Ender 3, & anything else in between! They will check what sort of machine you have & try to adapt themselves to it automatically!
So for example if you hit MACHINE_LEVEL on a COREXY printer you'll get a QUAD_GANTRY_LEVEL, but if you do the same on a bed slinger you'll get a Z_TILT_ADJUST.
Checks & Error Handling. Clear & easy to read messages
Important
These macros rely on you setting the correct filament type in your slicer! BE SURE YOU DO THIS!
These macros are smart & have adaptive properties & will shape themselves to what you’re printing. For example the macros know if your printer is CoreXY or bed slinger, they know if it's already homed so wont home it again, & can not only automatically shape itself to simple things like your printer’s bed size & what temperatures you’re printing at! Plus it can automatically choose & load the correct mesh for the temperature of your print, as your bed will slightly change shape the hotter it gets.
A macro pack features list is here....
Macro pack version update history is here....
…Well its not that tricky because I got it all written down here for you to just copy/paste into your setup!
PLEASE CHECK ALL INSTRUCTIONS CAREFULLY!
Caution
Don’t just install & run the macros & wonder why they don’t work! They WILL need setting up once on your system. Damage to your machine may result if the macros are run without the prerequisites or without the correct setup before first use!
You will need to edit your slicer's Start G-code & End G-code boxes to get the PRINT_START macro to work correctly.
If you get the error in the photo below it means your version is not v2.2.0 (beta or beta2 or later) PLEASE UPDATE YOUR SLICER!
Do NOT use Orca Slicer from anywhere other than GitHub or Flathub. Orca Slicer Does NOT have a dedicated website associated with the project.
Use this link....
Whats that I hear you cry, you want more?! Ok I got you covered!
How about fully automated power on/off control with auto cool down & shutdown after a print finishes?! Plus have full control even after Klipper is in shutdown! What is this black magic?!!!
Find out here!
Or maybe you're using a printer with a bedside mounted Z endstop switch & sensorless homing & you want an AUTO E STOP system so that if your nozzle misses your endstop switch the printer knows there's a problem!
If thats not enough how about creating your very own online auto updating backup of all your config files here on Github in your own private repo?!