Bosch Smart Home Controller API Python Library

Python client library for the Bosch Smart Home Controller (SHC) local REST API. Communicates directly with the controller over mutual-TLS on the local network — no cloud, no Bosch account required. The official API documentation is available at github.com/BoschSmartHome/bosch-shc-api-docs.

Beyond the documented OpenAPI surface, this library also models several endpoints that Bosch's own Android app uses but never published a spec for (firmware updates, the local automation-rule engine, hydraulic balancing, ...) — these were traced by decompiling the official app and/or capturing live traffic against a real controller. Anything not confirmed against real hardware is called out explicitly below and in the relevant docstrings.

Quick start

1 — Install

pip install boschshcpy

2 — Register a client certificate

Press and hold the SHC front button until the LED flashes (registration mode, ~10 s), then:

boschshc_registerclient -ip 192.168.x.x -pw YOUR_SHC_PASSWORD

This writes cert.pem and key.pem to the working directory.

3 — Use the session

import boschshcpy

session = boschshcpy.SHCSession("192.168.x.x", "cert.pem", "key.pem")
session.information.summary()
session.start_polling()          # starts long-poll thread; callbacks fire on state change
# ... your code ...
session.stop_polling()

For asyncio / Home Assistant usage see the async example below.

Architecture

graph TD
    APP("Your code / Home Assistant\nSHCSession or SHCSessionAsync")
    DH("SHCDeviceHelper\ntyped per-category device accessors")
    DOM("Domains\nSHCIntrusionSystem, SHCWaterAlarmSystem,\nSHCAutomationRule, SHCEmma")
    DS("SHCDeviceService\nservice state + event/callback dispatch")
    RA("SHCAPI / SHCAPIAsync\nHTTP + mTLS client, retry-on-drop")
    POLL("SHCPollingThread\n(sync client only)")
    SHC("Bosch Smart Home Controller")
    DEV("Zigbee / HomeMaticIP / Bluetooth\ndevices, LEDVANCE & Hue lights, cameras")

    APP --> DH
    APP --> DOM
    DH --> DS
    DOM --> RA
    DS --> RA
    APP -.->|start_polling / async context manager| POLL
    POLL -->|long-poll GET, port 8446| RA
    RA -->|"REST, port 8444/8446\nclient-cert mTLS"| SHC
    SHC <-->|Zigbee / HmIP / vendor bridges| DEV

Sync path (SHCSession + SHCAPI): blocking requests/urllib3 calls. A dedicated SHCPollingThread owns the long-poll subscription; state-change callbacks fire from that thread, so any UI/event-loop consumer must marshal back onto its own thread. Suitable for scripts and simple consumers.

Async path (SHCSessionAsync + SHCAPIAsync): fully asyncio-native, built on aiohttp. This is what the boschshc-hass Home Assistant integration uses in production. Every write method has an async def async_* coroutine counterpart; the long-poll loop runs as a plain asyncio task, no separate thread needed. Both clients retry once on a dropped connection (SHCConnectionError), and both tolerate partial/malformed long-poll messages without stalling the poll loop.

Domain model

graph LR
    S["SHCSession /\nSHCSessionAsync"]
    S --> D["devices\n(SHCDevice subclasses,\nvia device_helper buckets)"]
    S --> R["rooms\n(SHCRoom)"]
    S --> SC["scenarios\n(SHCScenario)"]
    S --> AR["automation_rules\n(SHCAutomationRule)"]
    S --> UDS["userdefinedstates\n(SHCUserDefinedState)"]
    S --> MSG["messages\n(SHCMessage)"]
    S --> INFO["information\n(SHCInformation)"]
    S --> IDS["intrusion_system\n(SHCIntrusionSystem)"]
    S --> WA["water_alarm_system\n(SHCWaterAlarmSystem, optional)"]
    S --> E["emma\n(SHCEmma, grid power)"]

    D --> SVC["device_service(name)\n(SHCDeviceService)"]
    SVC -->|state changes, events| CB["subscribe_callback()"]

Every device, room, domain and service tracks its own raw JSON state and refreshes itself either from a targeted short_poll()/refresh() call or from the long-poll callback dispatch — nothing here does a blind full re-enumeration on every update.

Install

Requires Python ≥ 3.10.

pip install boschshcpy

Current PyPI version: 0.6.1

Supported device services

TemperatureLevel, HumidityLevel, RoomClimateControl, ShutterContact,
ValveTappet, PowerSwitch, PowerMeter, Routing, PowerSwitchProgram,
PresenceSimulationConfiguration, BinarySwitch, SmokeDetectorCheck, Alarm,
ShutterControl, CameraLight, PrivacyMode, CameraNotification,
IntrusionDetectionControl, Keypad, LatestMotion, AirQualityLevel,
SurveillanceAlarm, BatteryLevel, Thermostat, WaterLeakageSensor,
WaterLeakageSensorTilt, HeatingCircuit, PirSensorConfiguration,
SmartSensitivityControl, DetectionTest, WalkTest, LatestTamper, PollControl,
PetImmunity, OccupancyDetection, MultiLevelSwitch, ChildProtection,
SwitchConfiguration, DimmerConfiguration, Bypass, OutdoorSiren,
CommunicationQuality, BoilerHeating, and more

Supported device models

Model key	Description
`SWD` / `SWD2` / `SWD2_PLUS` / `SWD2_DUAL`	Shutter Contact Gen 1 + Gen 2 (incl. 2 Plus, Dual)
`BBL`	Shutter Control
`MICROMODULE_SHUTTER` / `MICROMODULE_AWNING`	Micromodule Shutter / Awning
`MICROMODULE_BLINDS`	Micromodule Blinds (with tilt)
`PSM`	Smart Plug
`PLUG_COMPACT` / `PLUG_COMPACT_DUAL`	Smart Plug Compact
`BSM`	Light Switch BSM
`MICROMODULE_LIGHT_CONTROL` / `MICROMODULE_LIGHT_ATTACHED`	Micromodule Light Control / Attached
`MICROMODULE_RELAY`	Micromodule Relay (switch and impulse types)
`MICROMODULE_DIMMER`	Micromodule Dimmer
`SD` / `SMOKE_DETECTOR2`	Smoke Detector Gen 1 + Gen 2
`SMOKE_DETECTION_SYSTEM`	Smoke Detection System
`CAMERA_EYES`	Camera Eyes
`CAMERA_360`	Camera 360
`CAMERA_OUTDOOR_GEN2`	Camera Outdoor Gen 2
`ROOM_CLIMATE_CONTROL`	Room Climate Control (thermostat group)
`HEATING_CIRCUIT`	Heating Circuit
`BOILER`	Multiroom Boiler Control (room-linked heat-demand device — spec-only, not live-tested, no owned hardware)
`TRV` / `TRV_GEN2` / `TRV_GEN2_DUAL`	Thermostat (Radiator Valve) Gen 1 + Gen 2
`THB` / `BWTH` / `BWTH24`	Wall Thermostat
`RTH2_BAT` / `RTH2_230`	Room Thermostat 2
`WRC2` / `SWITCH2`	Universal Switch
`MD` / `MD2`	Motion Detector Gen 1 + Gen 2 [+M]
`PRESENCE_SIMULATION_SERVICE`	Presence Simulation System
`TWINGUARD`	Twinguard (smoke + air quality)
`WLS`	Water Leakage Sensor
`OUTDOOR_SIREN`	Outdoor Siren (test-alarm trigger, power-supply diagnostics)
`LEDVANCE_LIGHT` / `HUE_LIGHT`	LEDVANCE / Hue lights (via SHC)

Capabilities

Beyond straightforward device-service read/write, the library covers a number of controller-wide and cross-device features. Everything here is additive on top of the per-device services above.

Firmware updates

Two independent, device-agnostic surfaces (APK-traced, not in the official OpenAPI spec):

Controller firmware: SHCInformation.start_software_update() / async_start_software_update() triggers the SHC's own firmware install (POST rootdevices/startSoftwareUpdate). Controller-wide update status is available via SHCInformation fields such as available_version, last_update_result, update_activation_timeout, api_versions, and shc_generation.
Per-device firmware: SHCDevice.firmware_update_state() / async_firmware_update_state() probes a device's own firmware lifecycle (GET devicemanagement/firmware/{deviceId}) independent of which services that device advertises — returns one of Fetching, UpToDate, UpdateRunning, TransferringUpdate, AwaitingUserInteraction, AwaitingActivation, AwaitingActivationTimeout, UpdatePending, UpdateAvailable, UpToDateAwaitingUserInteraction, Failed, Unknown, or None if the device has no firmware capability at all (e.g. virtual devices, the controller's own root device). SHCDevice.activate_firmware_update() / async_activate_firmware_update() (PUT devicemanagement/firmware/{deviceId}/activate) then triggers the actual install.

Both the state probe and the install action have been confirmed end-to-end against real hardware: a TRV_GEN2 radiator thermostat correctly reported AwaitingActivation, matching the Bosch app at the same moment, and triggering the install walked the real device through AwaitingActivation → UpdatePending → Unknown → UpToDateAwaitingUserInteraction over roughly 90 seconds, staying fully functional throughout.

Local automation-rule engine

SHCAutomationRule models the native "if this then that" rules the Bosch app's own automation editor manages (arm/disarm state, keypad presses, astro time, shutter contacts, user-defined states, ... driving plug/light/climate/camera/notification actions) — an entirely separate system from Home Assistant's own automations, undocumented in the official spec, APK-traced and confirmed live against a real SHC with 23 real user-configured rules.

for rule in session.automation_rules:
    rule.summary()               # id, name, enabled, trigger/condition/action counts

rule = session.automation_rule("some-rule-id")
rule.set_enabled(False)          # or await rule.async_set_enabled(False)
rule.trigger()                   # or await rule.async_trigger() — fire it manually, right now
rule.refresh()                   # re-fetch just this rule

Deleting a rule is available at the API layer (session.api.delete_automation_rule(rule_id)); it isn't (yet) wrapped as an SHCAutomationRule instance method.

Whole-home water-leak alarm system

session.water_alarm_system (an SHCWaterAlarmSystem, documented in the official WaterDetectionSystem OpenAPI spec) mirrors the whole-installation alarm state the Bosch app shows, separate from the individual per-device WaterLeakageSensor/WaterLeakageSensorTilt services exposed on each SHCWaterLeakageSensor (session.device_helper.water_leakage_detectors) — the domain aggregates across all water sensors in the installation, while each device still reports its own local leak/tilt state independently.

if session.water_alarm_system is not None:      # None on installs with no water sensors at all
    wa = session.water_alarm_system
    print(wa.available, wa.alarm_state)          # AlarmState.ALARM_OFF / WATER_ALARM / ALARM_MUTED
    print(wa.first_incident_device_id, wa.first_incident_room_name, wa.first_incident_timestamp)
    wa.mute()                                    # or await wa.async_mute()

The domain degrades gracefully (simply absent, session.water_alarm_system is None) on installations without any water-leak sensors.

Intrusion detection (arm/disarm + read-only discovery)

session.intrusion_system (SHCIntrusionSystem) covers the interactive controls:

session.intrusion_system.arm()                       # default profile
session.intrusion_system.arm_full_protection()        # profile 0
session.intrusion_system.arm_partial_protection()     # profile 1
session.intrusion_system.arm_individual_protection()  # profile 2 (custom)
session.intrusion_system.disarm()
session.intrusion_system.mute()                       # silence an active alarm
print(session.intrusion_system.arming_state, session.intrusion_system.alarm_state)
print(session.intrusion_system.active_configuration_profile)   # Profile.UNKNOWN if unrecognized
print(session.intrusion_system.security_gaps)

On top of that, the API layer exposes read-only discovery endpoints for the intrusion system's own configuration surface — profiles, per-profile states, and endpoint actuator/trigger listings — laying the groundwork for exposing intrusion-system configuration (not just arm/disarm) to consumers in future:

session.api.get_intrusion_profiles()
session.api.get_intrusion_profile(profile_id)
session.api.get_intrusion_profile_states()
session.api.get_intrusion_endpoint_alarm_actuators()
session.api.get_intrusion_endpoint_alarm_triggers()
session.api.get_intrusion_endpoint_reminder_actuators()

Thermostat regulation, per-room temperature drop, and related climate surfaces

Regulation algorithm (per thermostat device): SHCDevice.thermostat_regulation_algorithm() / async_thermostat_regulation_algorithm() to read, set_thermostat_regulation_algorithm() / async_set_thermostat_regulation_algorithm() to write — returns None (rather than raising) on devices without this capability. Confirmed live.
Per-room temperature drop (SHCRoom, the anti-frost/window-open compensation setting from the app's room-detail screen): room.temperature_drop_service / async_temperature_drop_service, set_temperature_drop_enabled() / async_set_temperature_drop_enabled(), set_temperature_drop_value() / async_set_temperature_drop_value(). Confirmed live across 12 real rooms.
Hydraulic balancing configuration — SHCAPI/SHCAPIAsync get_hydraulic_balancing_configurations() / get_hydraulic_balancing_configuration(config_id) / put_hydraulic_balancing_configuration(config_id, config). Not in the official OpenAPI spec, APK ground-truth, and NOT live-confirmed — no hydraulic-balancing-capable device is available to test against; treat as provisional.
Comfort-zone templates — SHCAPI/SHCAPIAsync get_comfort_zone_templates(sensor_id) / put_comfort_zone_template(sensor_id, comfort_zone). Same caveat as hydraulic balancing: APK-derived, not live-confirmed.
Multiroom Boiler Control (SHCBoiler device, BoilerHeatingService) — a device family plus a room-linking API: SHCAPI/SHCAPIAsync get_boiler_capable_rooms(), get_boiler_linked_rooms(boiler_id) / put_boiler_linked_rooms(boiler_id, room_ids), put_boiler_add_room(boiler_id, room_id). Fully documented in the official spec but was never implemented until 0.6.0. Not live-tested — no owned Boiler hardware; implemented carefully and directly from the spec, flagged as such in every relevant docstring. SHCBoiler devices show up through normal enumeration (session.devices, session.device(device_id)) like any other device.

Whole-home open-doors/open-windows summary

SHCAPI.get_open_windows() / SHCAPIAsync.get_open_windows() — a single controller-wide summary of which doors/windows are currently open, live-confirmed against a real installation. The real response is a strict superset of the documented Windows schema — it also includes bypassedDoors, bypassedWindows, openOthers, bypassedOthers, and unknownOthers beyond what the official spec documents (reported upstream).

Zigbee routing diagnostics

SHCAPI/SHCAPIAsync/SHCSession/SHCSessionAsync get_zigbee_routing_info(device_id) — an APK-discovered endpoint (GET /smarthome/zigbee/routinginfo/{deviceId}, not in the official docs), confirmed working against real hardware. Returns an SHCZigbeeRoutingInfo (device_id, aggregated_quality, and an ordered route of ZigbeeRoutingHop(device_id, quality) entries) describing the mesh path back to the controller — useful for diagnosing a flaky Zigbee end device.

EMMA grid power

session.emma (SHCEmma) exposes the EMMA energy-management/grid-power domain, when present on the installation.

Usage

Register a new client

Press and hold the button on the SHC controller until the LED starts flashing (registration mode). Then run:

boschshc_registerclient -ip YOUR_SHC_IP -pw YOUR_SHC_PASSWORD

This writes a certificate/key pair (cert.pem / key.pem) to the working directory. The CLI prompts for the SHC password via a hidden getpass prompt if -pw is omitted, and writes the private key with 0600 permissions — neither the password nor the key material is ever printed to stdout or left in shell history.

More details: Bosch API docs — register a client

Python API (sync)

import boschshcpy

# Create session (lazy=False enumerates all devices on connect)
session = boschshcpy.SHCSession(
    controller_ip="192.168.25.51",
    certificate="cert.pem",
    key="key.pem",
)
session.information.summary()

# Access a device and service
device = session.device("roomClimateControl_hz_5")
service = device.device_service("TemperatureLevel")
print(service.temperature)

# Short-poll a single service
service.short_poll()

# Writing to a service — every writable service field has a setter.
# Sync property setter, or an async_set_* coroutine for the event loop:
device.multi_level_switch = 50              # sync write (PUT to the service)
await device.async_set_multi_level_switch(50)

# Motion Detector II examples (services the SHC exposes for the MD2 [+M]):
from boschshcpy.services_impl import DetectionTestService, PollControlService
md2 = session.device_helper.motion_detectors2[0]
md2.set_detection_state_request(                 # start a walk/detection test
    DetectionTestService.DetectionStateRequest.DETECTION_STATE_START)
md2.tamper_protection_enabled = True             # toggle tamper protection
md2.reset_tampered_state()                       # POST resetTamperedState
md2.long_poll_interval = PollControlService.PollControlState.SHORT  # orientation-light response
print(md2.profile, md2.supported_profiles)       # installation profile (read-only unless writable, see below)
md2.set_profile("OUTDOOR")                       # write the installation profile (validated against supported_profiles)

# Start long-poll thread (non-blocking)
session.start_polling()

# ... do work, handle callbacks ...

# Stop polling
session.stop_polling()

# Arm the intrusion detection system
session.intrusion_system.arm()

# Trigger the controller's own firmware update
session.information.start_software_update()

# Fire a local automation rule manually
session.automation_rules[0].trigger()

# Raw API dump
scan_result = session.rawscan(command="devices")

Python API (async / aiohttp)

import asyncio
import boschshcpy

async def main():
    session = boschshcpy.SHCSessionAsync(
        controller_ip="192.168.25.51",
        certificate="cert.pem",
        key="key.pem",
    )
    async with session:
        for device in session.device_helper.smart_plugs:
            await device.async_set_state(True)  # turn on

        if session.water_alarm_system is not None:
            print(session.water_alarm_system.alarm_state)

asyncio.run(main())

Device helper accessors (`SHCSession.device_helper`)

SHCDeviceHelper exposes typed properties for each device category:

shutter_contacts, shutter_contacts2, shutter_controls,
micromodule_shutter_controls, micromodule_blinds, micromodule_relays,
micromodule_impulse_relays, micromodule_light_controls,
micromodule_light_attached, micromodule_dimmers, light_switches_bsm,
smart_plugs, smart_plugs_compact, smoke_detectors, smoke_detection_system,
climate_controls, heating_circuits, thermostats, wallthermostats,
roomthermostats, motion_detectors, motion_detectors2, twinguards,
universal_switches, camera_eyes, camera_360, camera_outdoor_gen2,
ledvance_lights, hue_lights, water_leakage_detectors,
presence_simulation_system, outdoor_sirens

SHCBoiler devices aren't (yet) exposed via a dedicated device_helper bucket — access them through normal device enumeration (session.devices, session.device(device_id)).

Other session attributes: session.scenarios, session.rooms, session.automation_rules, session.userdefinedstates, session.messages, session.intrusion_system, session.water_alarm_system (None if the installation has no water sensors), session.emma (EMMA grid power), session.information (SHCInformation — firmware/version/network details).

Rawscans (command-line)

Public information

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem public_information

All devices

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem devices

Single device

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem device YOUR_DEVICE_ID

Services of a device

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem device_services YOUR_DEVICE_ID

Single service of a device

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem device_service YOUR_DEVICE_ID YOUR_SERVICE_ID

All scenarios

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem scenarios

All rooms

boschshc_rawscan -ip YOUR_SHC_IP -cert cert.pem -key key.pem rooms

Example device output:

{
    "@type": "device",
    "rootDeviceId": "xx-xx-xx-xx-xx-xx",
    "id": "hdm:HomeMaticIP:30xxx",
    "deviceServiceIds": [
        "Thermostat", "BatteryLevel", "ValveTappet",
        "SilentMode", "TemperatureLevel", "Linking", "TemperatureOffset"
    ],
    "manufacturer": "BOSCH",
    "roomId": "hz_8",
    "deviceModel": "TRV",
    "serial": "30xxx",
    "name": "Test Thermostat",
    "status": "AVAILABLE"
}

Maintainers / support

Role
Original authors	Clemens-Alexander Brust (@cabrust), Thomas Schamm (@tschamm)
Co-maintainer	Thomas Mosandl (@mosandlt)

Bug reports and feature requests: github.com/tschamm/boschshcpy/issues

Name		Name	Last commit message	Last commit date
.github		.github
boschshcpy		boschshcpy
examples		examples
tests		tests
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
MANIFEST.in		MANIFEST.in
README.md		README.md
RELEASING.md		RELEASING.md
create_dist.sh		create_dist.sh
mypy.ini		mypy.ini
setup.py		setup.py

Latest commit

History

Folders and files

Repository files navigation

Bosch Smart Home Controller API Python Library

Contents