v0.1.0

.github/README.md

@@ -21,7 +21,7 @@ It supports both Station (STA) and Access Point (AP) modes, JSON-based configura
 - 🧩 Modular: add pins, WebSockets, and more via dashboard
 - 🔐 Configurable authentication (username/password)
 - 🔄 Over-the-air (OTA) firmware and filesystem updates
-- 🛠️ PlatformIO and Arduino IDE compatible
+- 🛠️ ESP-IDF / PlatformIO (ESP-IDF) compatible
 
 ---
 
@@ -34,10 +34,6 @@ lib_deps =
   https://github.com/vekjja/ESPWiFi.git
 ```
 
-### Arduino IDE
-1. Download or clone this repo
-2. Move the folder into your Arduino `libraries/` directory
-
 ---
 
 ## 📂 File Structure
@@ -74,23 +70,28 @@ ESPWiFi/
 
 ---
 
-## 🔧 Firmware Usage (C++/Arduino)
+## 🔧 Firmware Usage (ESP-IDF)
 
 ### Quick Start (Default Configuration)
 
-The simplest way to use ESPWiFi is with the default `start()` and `runSystem()` methods:
+The simplest way to run ESPWiFi is using the default `start()` and `runSystem()` methods from your ESP-IDF entrypoint.
+
 ###### ESPWiFi will generate a default `config.json` file if not present.
 ```cpp
-#include <ESPWiFi.h>
+#include "ESPWiFi.h"
+#include "esp_log.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "nvs_flash.h"
 
 ESPWiFi espwifi;
 
-void setup() {
+extern "C" void app_main(void) {
   espwifi.start();
-}
-
-void loop() {
-  espwifi.runSystem();
+  while (1) {
+    espwifi.runSystem();
+    espwifi.feedWatchDog();
+  }
 }
 ```
 
@@ -139,19 +140,19 @@ For more control, you can use `config.json` to configure the device and start se
 
 ### Example Custom Firmware Usage
 ```cpp
-#include <ESPWiFi.h>
+#include "ESPWiFi.h"
 
 ESPWiFi espwifi;
 
-void setup() {
+extern "C" void app_main(void) {
   espwifi.readConfig();      // Load config from LittleFS (Can be omitted, but will be called by other services if needed) 
   espwifi.startAP();         // Explicitly Start Access Point Only
   espwifi.srvGPIO();         // Register Only GPIO endpoints 
-}
 
-void loop() {
-  feedWatchDog();                 // Allow other tasks to run
-  // Custom main loop logic here
+  while (1) {
+    espwifi.feedWatchDog();       // Allow other tasks to run
+    // Custom main loop logic here
+  }
 }
 ```
 

.github/workflows/FirmwareBuild.yml

@@ -250,10 +250,10 @@ jobs:
           #   chip: esp32
           #   baud: 460800
           #   bootloader_offset: "0x1000"
-          # - environment: esp32-c3
-          #   chip: esp32c3
-          #   baud: 921600
-          #   bootloader_offset: "0x0"
+          - environment: esp32-c3
+            chip: esp32c3
+            baud: 921600
+            bootloader_offset: "0x0"
           - environment: esp32-s3
             chip: esp32s3
             baud: 921600

cloud/main.go

@@ -736,33 +736,39 @@ func (dc *deviceConn) closeWithReason(code int, reason string) {
 }
 
 func (s *server) publicBase(r *http.Request) string {
+	var base string
 	if strings.TrimSpace(s.publicBaseURL) != "" {
-		return strings.TrimRight(strings.TrimSpace(s.publicBaseURL), "/")
-	}
-
-	// Infer from reverse-proxy headers when available.
-	proto := r.Header.Get("X-Forwarded-Proto")
-	if proto == "" {
-		if r.TLS != nil {
-			proto = "https"
-		} else {
-			proto = "http"
+		base = strings.TrimRight(strings.TrimSpace(s.publicBaseURL), "/")
+	} else {
+		// Infer from reverse-proxy headers when available.
+		proto := r.Header.Get("X-Forwarded-Proto")
+		if proto == "" {
+			if r.TLS != nil {
+				proto = "https"
+			} else {
+				proto = "https" // Force HTTPS even if not detected
+			}
 		}
-	}
-	host := r.Header.Get("X-Forwarded-Host")
-	if host == "" {
-		host = r.Host
+		host := r.Header.Get("X-Forwarded-Host")
+		if host == "" {
+			host = r.Host
+		}
+		base = proto + "://" + host
 	}
 
-	// Convert http(s) -> ws(s) for convenience.
-	switch strings.ToLower(proto) {
-	case "https":
-		return "wss://" + host
-	case "http":
-		return "ws://" + host
-	default:
-		return "ws://" + host
+	// Convert https:// -> wss:// for WebSocket URLs (only support secure connections)
+	if strings.HasPrefix(base, "https://") {
+		return "wss://" + strings.TrimPrefix(base, "https://")
+	}
+
+	// If someone configured http://, reject it - we only support secure connections
+	if strings.HasPrefix(base, "http://") {
+		// Log a warning but still upgrade to wss for security
+		return "wss://" + strings.TrimPrefix(base, "http://")
 	}
+
+	// Already wss:// or unknown format
+	return base
 }
 
 func authOK(r *http.Request, token string) bool {

dashboard/.dockerignore

@@ -1,30 +1,39 @@
-# Dependencies
-node_modules
-npm-debug.log
-yarn-debug.log*
-yarn-error.log*
-pnpm-debug.log*
+# Local development files - should not be in Docker images
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
 
-# Build outputs
+# Development artifacts
+node_modules
 build
 dist
-
-# CRA/webpack caches
 .cache
 
-# Local env files (keep these out of images)
-.env*
-
-# Allow a single optional build-time env file if you choose to use it.
-# (Better practice is passing build args / CI secrets, but this enables local builds.)
-!.env.prod
+# IDE and editor files
+.vscode
+.idea
+*.swp
+*.swo
+*~
 
-# OS / editor noise
+# OS files
 .DS_Store
-.idea
-.vscode
+Thumbs.db
 
-# If you run dashboard builds that output to the firmware folder
-../data
+# Git
+.git
+.gitignore
 
+# Testing
+coverage
+.nyc_output
+
+# Logs
+npm-debug.log*
+yarn-debug.log*
+yarn-error.log*
+lerna-debug.log*
 
+# Misc
+*.log

dashboard/.env.local

@@ -1,3 +1,3 @@
 REACT_APP_API_HOST=espwifi.local
-REACT_APP_TEST_HOSTED_MODE=true
+REACT_APP_TEST_HOSTED_MODE=false
 REACT_APP_API_PORT=80