SigGen

Simple Waveform Generator

This is a waveform generator project that uses STM32F072RB nucleo development board.

The waveform generator supports Sine, Sawtooth, Triangular, and Square wavee.

Current specification supports 1Hz to 2000Hz and amplitude of 1.0v to 3.3v.

The waveform selection is using the serial UART port in the nucleo development board.

The output channel for the waveform on Pin PA_4 according to the pinout diagram of STM32F072RB nucleo development board.

System Default:

# The serial terminal menu is printed using 115200 baud rate.
# The Pin PA_4 will output 1kHz Sine Wave with 3.3V amplitude when the board startup.