Skip to content
Devil edited this page Nov 15, 2026 · 5 revisions

Project Phoenix User Guide

Project Phoenix is a community-built app for Vitruvian V-Form Trainer and Trainer+ owners. You can train and keep your workout data locally without a Phoenix account. Cloud Sync and health integrations are optional.

Guide reviewed November 15, 2026. The latest numbered GitHub app release is v1.1.0. This guide was checked against that tag and current application source. Features found only in newer source are explicitly marked; your Play/TestFlight build may differ. Check your installed version in Settings → App Info. See What's New for the distinction between an app release and prototype evidence.

Supported Trainers and Requirements

Machine Typical Bluetooth name Maximum resistance per cable
Vitruvian V-Form Trainer Vee_* 100 kg
Vitruvian Trainer+ VIT* 110 kg

Use an Android phone/tablet with Android 8.0+, or an iPhone/iPad with iOS/iPadOS 15.0+, and Bluetooth Low Energy. Weight settings are per cable, not the combined two-cable machine total. Start with a conservative load, not the hardware limit.

Install

Your First Workout

  1. Install Phoenix, turn on Bluetooth, and allow the required Bluetooth/nearby-device permissions.
  2. Power on the trainer. Close other apps or devices that may already be connected to it.
  3. Open Phoenix, connect to your trainer, and select the correct lifter profile.
  4. Open Workout and choose Just Lift, Single Exercise, Routines, or Training Cycles.
  5. Review the mode, per-cable load, and reps or duration before starting. Follow the calibration/warm-up prompts.
  6. After training, review the summary, label Just Lift sets when appropriate, and use Analytics to review history and progress.

First-Workout walks through setup and completion. Training preferences belong to the active Profile; general appearance, backups, and integrations are in Settings.

User Guides

Safety and Data

Phoenix controls hardware capable of generating significant resistance. Keep the training area clear and stop if the machine behaves unexpectedly. A Bluetooth disconnect or on-screen stop is not proof that physical resistance has released. Follow any recovery/safety warning rather than immediately resuming.

Keep a file backup before switching devices, reinstalling, or making major changes. Portal sync is not a complete replacement for a backup: some data remains local. See Settings-and-Data and Integrations-and-Sync.

Clone this wiki locally