Add KARAKSA-F PA-CNF DX preset for MAX4 0.4 mm (12 mm3/s)

resources/profiles/X 4 Series.json

@@ -204,6 +204,14 @@
             "name": "fdm_filament_common",
             "sub_path": "filament/fdm_filament_common.json"
         },
+        {
+            "name": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series",
+            "sub_path": "filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json"
+        },
+        {
+            "name": "AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle",
+            "sub_path": "filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json"
+        },
         {
             "name": "Generic ABS@X4",
             "sub_path": "filament/Generic ABS.json"

resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFNAKDX1",
+    "setting_id": "GFSNAKDX41",
+    "name": "AsahiKasei KARAKSA-F PA-CNF DX @Qidi X-Max 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series",
+    "compatible_printers": ["X-Max 4 0.4 nozzle"]
+}

resources/profiles/X 4 Series/filament/AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series.json

@@ -0,0 +1,60 @@
+{
+    "type": "filament",
+    "filament_id": "GFNAKDX1",
+    "setting_id": "GFSNAKDX40",
+    "name": "AsahiKasei KARAKSA-F PA-CNF DX @X-Max 4-Series",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "close_fan_the_first_x_layers": ["3"],
+    "complete_print_exhaust_fan_speed": ["70"],
+    "cool_plate_temp": ["0"],
+    "cool_plate_temp_initial_layer": ["0"],
+    "default_filament_colour": [""],
+    "during_print_exhaust_fan_speed": ["70"],
+    "enable_overhang_bridge_fan": ["1"],
+    "enable_pressure_advance": ["0"],
+    "eng_plate_temp": ["65"],
+    "eng_plate_temp_initial_layer": ["65"],
+    "fan_cooling_layer_time": ["5"],
+    "fan_max_speed": ["30"],
+    "fan_min_speed": ["10"],
+    "filament_adaptive_volumetric_speed": ["0"],
+    "filament_adhesiveness_category": ["400"],
+    "filament_change_length": ["10"],
+    "filament_cooling_before_tower": ["10"],
+    "filament_density": ["1.16"],
+    "filament_end_gcode": ["; No material-specific end commands."],
+    "filament_extruder_variant": ["Direct Drive Standard"],
+    "filament_flow_ratio": ["0.96"],
+    "filament_is_support": ["0"],
+    "filament_long_retractions_when_cut": ["nil"],
+    "filament_max_volumetric_speed": ["12"],
+    "filament_notes": "Asahi Kasei KARAKSA-F PA-CNF DX (DX205): cellulose nanofiber reinforced polyamide. PA6-CF is retained only as the QIDI printer/BOX compatibility category; this product contains CNF, not carbon fiber. MAX4 0.4 mm profile: nozzle 275 C, PEI/hot/engineering bed 65 C, flow ratio 0.96, conservative volumetric limit 12 mm3/s. Based on a user-supplied profile and a physical MAX4 flow test with QIDI BOX; 12 mm3/s is a conservative selected value, not a measured failure threshold or a manufacturer-certified flow rate. Nozzle range 260-280 C follows manufacturer guidance and bounds the HOTENDTEMP parameter in BOX_PRINT_START. Density 1.16 g/cm3 and diameter 1.75 mm follow the publicly downloadable DX205 TDS CNFF-TD002-1. No required nozzle hardness; active chamber/BOX heating and pressure advance override are off. Pre-dry the filament and use PA-compatible bed adhesive. Other nozzle sizes and printer models require separate calibration. Manufacturer information: https://www.asahi-kasei.co.jp/karaksa/products/pa-filament.html Public TDS: https://filament2print.com/en/index.php?controller=attachment&id_attachment=3734",
+    "filament_printable": ["3"],
+    "filament_retraction_distances_when_cut": ["nil"],
+    "filament_shrink": ["100%"],
+    "filament_start_gcode": ["; QIDI Studio: fan and chamber control are handled by the selected printer profile."],
+    "filament_type": ["PA6-CF"],
+    "filament_vendor": ["AsahiKasei"],
+    "first_x_layer_fan_speed": ["0"],
+    "full_fan_speed_layer": ["2"],
+    "hot_plate_temp": ["65"],
+    "hot_plate_temp_initial_layer": ["65"],
+    "ironing_fan_speed": ["-1"],
+    "long_retractions_when_ec": ["0"],
+    "nozzle_temperature": ["275"],
+    "nozzle_temperature_initial_layer": ["275"],
+    "nozzle_temperature_range_high": ["280"],
+    "nozzle_temperature_range_low": ["260"],
+    "overhang_fan_threshold": ["0%"],
+    "pressure_advance": ["0.02"],
+    "required_nozzle_HRC": ["0"],
+    "retraction_distances_when_ec": ["0"],
+    "slow_down_layer_time": ["2"],
+    "supertack_plate_temp": ["0"],
+    "supertack_plate_temp_initial_layer": ["0"],
+    "textured_plate_temp": ["65"],
+    "textured_plate_temp_initial_layer": ["65"],
+    "volumetric_speed_coefficients": ["0 0 0 0 0 0"]
+}