Correct en-GB-oxendict spellings in code symbols and prose

.config/nextest.toml

@@ -14,10 +14,11 @@ default-filter = "not (binary(behaviour_toolchain) | binary(behaviour_cli) | kin
 # cancels the run and discards the log that would have named the test.
 slow-timeout = { period = "300s", terminate-after = 1, grace-period = "5s" }
 # The whole run's budget. It sits above the largest per-test allowance below,
-# so a test may spend its budget in full. It also leaves fifteen minutes beyond
-# the prior whole-run timeout, which stopped a nearly complete suite.
+# so a test may spend its budget in full. The previous 75-minute run reached
+# 1,840 of 1,842 tests before the nested SARIF API contract was still compiling.
+# Ten more minutes give that remaining trybuild work room to finish.
 # See "Test timeouts: four tiers, outermost last" in the developers' guide.
-global-timeout = "60m"
+global-timeout = "85m"
 
 # CI profile — run the full suite including slow installer tests.
 [profile.ci]
@@ -31,7 +32,7 @@ default-filter = "not kind(example)"
 # budgets that govern CI belong where a reader of this profile finds
 # them.
 slow-timeout = { period = "300s", terminate-after = 1, grace-period = "5s" }
-global-timeout = "60m"
+global-timeout = "85m"
 
 [[profile.ci.overrides]]
 # The toolchain auto-install behavioural tests may download and install a
@@ -42,41 +43,48 @@ test-group = "serial-toolchain-installs"
 
 [[profile.ci.overrides]]
 # Dylint UI harnesses build lint libraries; the default profile gives them
-# the same allowance below. `trybuild` compile-contract binaries belong
-# here too: they invoke a nested cargo build, so they cost what a build
-# costs rather than what a test costs. `whitaker-installer`'s binary is
+# the same allowance below. Compile-contract tests use the dedicated
+# 45-minute override below.
+# `whitaker-installer`'s binary is
 # named `ui` but its test is not, so the `(binary(ui) & test(=ui))`
 # clause does not reach it; it measured 235 s and timed out at 300 s on
 # the Windows lane under the base allowance. A full workspace run also
-# reached 9m56 in the trybuild harness while compiler admission queued.
 # Keep that nested build bounded while leaving room to finish under contention.
-filter = "test(driver::ui::) | test(tests::ui::) | test(ui::ui) | test(sha2_0_11_pre_migration_patterns_fail_to_compile) | test(trybuild_fixtures_compile_without_diagnostics) | (binary(ui) & test(=ui))"
+filter = "test(driver::ui::) | test(tests::ui::) | test(ui::ui) | (binary(ui) & test(=ui))"
 slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
 test-group = "serial-dylint-ui"
 
 [[profile.ci.overrides]]
-# The macro crate's trybuild contract builds fixture crates too, so it needs a
-# build-sized timeout and the same serial target-directory protection.
-filter = "test(fixture_expansion_lint_attribute_contract)"
-slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
+# Every discovered trybuild test builds fixtures through nested Cargo. Keep
+# them under one build-sized allowance and avoid retries that repeat the work.
+filter = "test(dependency_check_result_contract_is_public) | test(fixture_expansion_lint_attribute_contract) | test(normalize_settings_is_public_and_the_legacy_name_stays_removed) | test(renamed_common_apis_are_public_and_legacy_names_stay_removed) | test(renamed_sarif_api_is_public_and_legacy_names_stay_removed) | test(sha2_0_11_pre_migration_patterns_fail_to_compile) | test(trybuild_fixtures_compile_without_diagnostics)"
+slow-timeout = { period = "45m", terminate-after = 1, grace-period = "5s" }
 test-group = "serial-dylint-ui"
+retries = 0
 
 [[profile.ci.overrides]]
-# The parser-pin cases run nested Cargo checks in isolated workspaces and need
-# the longer allowance while compiler admission queues.
+# The parser-pin fixtures run nested Cargo builds with isolated targets. Their
+# longer allowance reflects a full interval spent queued for compiler slots.
 filter = "binary(build_script_integration)"
-slow-timeout = { period = "30m", terminate-after = 1, grace-period = "5s" }
-test-group = "serial-build-script-integration"
+slow-timeout = { period = "45m", terminate-after = 1, grace-period = "5s" }
+test-group = "serial-nested-cargo-builds"
+
+[[profile.ci.overrides]]
+# This feature-disabled build also uses a fresh target directory; allow it to
+# finish after nested Cargo waits for shared compiler admission.
+filter = "binary(no_default_features_build)"
+slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
+test-group = "serial-nested-cargo-builds"
 
-# Serialise dylint UI tests that build lint libraries and use
+# Serialize dylint UI tests that build lint libraries and use
 # `#[serial]`.  nextest runs each test in its own process, so the
 # `serial_test` crate's in-process mutex has no effect.  A test-group
 # with max-threads = 1 prevents concurrent lint-library builds from
 # racing on the shared target directory.
 [test-groups]
 serial-dylint-ui = { max-threads = 1 }
 serial-toolchain-installs = { max-threads = 1 }
-serial-build-script-integration = { max-threads = 1 }
+serial-nested-cargo-builds = { max-threads = 1 }
 
 [[profile.default.overrides]]
 # Include crate-local UI entrypoints that wrap dylint UI fixtures.
@@ -110,29 +118,35 @@ serial-build-script-integration = { max-threads = 1 }
 # dev-dependency proc-macro hangs during cargo's dev-dependency resolution on
 # Windows CI regardless of whether any example source uses rstest, so all
 # Dylint example compilation for that crate is compiled away on Windows.
-# The trybuild harness reached 9m56 in a full run while compiler admission
-# queued, so allow 20 minutes for the complete serial UI group.
-filter = "test(driver::ui::) | test(tests::ui::) | test(ui::ui) | test(sha2_0_11_pre_migration_patterns_fail_to_compile) | test(example_compiles_without_diagnostics) | test(example_harness_collects_call_site_evidence) | test(trybuild_fixtures_compile_without_diagnostics) | test(ui::example_compiles_under_test_harness) | test(ui::hand_written_test_companion_does_not_exempt_parent_function) | test(ui::rstest_unwrap_outside_tests_still_fails_in_non_harness_code) | test(ui::rstest_empty_companion_does_not_exempt_parent_function) | test(ui::aliased_test_crate_non_companion_does_not_exempt_parent_function) | (binary(ui) & test(=ui))"
+# The installer UI case measured 235 s and timed out at the 300 s base
+# allowance on Windows. Allow nested UI builds to finish while keeping a cap.
+filter = "test(driver::ui::) | test(tests::ui::) | test(ui::ui) | test(example_compiles_without_diagnostics) | test(example_harness_collects_call_site_evidence) | test(ui::example_compiles_under_test_harness) | test(ui::hand_written_test_companion_does_not_exempt_parent_function) | test(ui::rstest_unwrap_outside_tests_still_fails_in_non_harness_code) | test(ui::rstest_empty_companion_does_not_exempt_parent_function) | test(ui::aliased_test_crate_non_companion_does_not_exempt_parent_function) | (binary(ui) & test(=ui))"
 test-group = "serial-dylint-ui"
 retries = { backoff = "exponential", count = 2, delay = "5s" }
 slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
 
 [[profile.default.overrides]]
-# The macro crate's trybuild contract builds fixture crates too, so it needs a
-# build-sized timeout and the same serial target-directory protection.
-filter = "test(fixture_expansion_lint_attribute_contract)"
-slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
+# Every discovered trybuild test builds fixtures through nested Cargo. Keep
+# them under one build-sized allowance and avoid retries that repeat the work.
+filter = "test(dependency_check_result_contract_is_public) | test(fixture_expansion_lint_attribute_contract) | test(normalize_settings_is_public_and_the_legacy_name_stays_removed) | test(renamed_common_apis_are_public_and_legacy_names_stay_removed) | test(renamed_sarif_api_is_public_and_legacy_names_stay_removed) | test(sha2_0_11_pre_migration_patterns_fail_to_compile) | test(trybuild_fixtures_compile_without_diagnostics)"
+slow-timeout = { period = "45m", terminate-after = 1, grace-period = "5s" }
 test-group = "serial-dylint-ui"
+retries = 0
 
 [[profile.default.overrides]]
-# These parser-pin integration cases run nested Cargo checks in isolated
-# workspaces; a cold build may queue behind other admitted compiler work.
+# These parser-pin and no-default-feature cases run nested Cargo builds in
+# isolated targets; a cold build may queue behind admitted compiler work.
 filter = "binary(build_script_integration)"
-slow-timeout = { period = "30m", terminate-after = 1, grace-period = "5s" }
-test-group = "serial-build-script-integration"
+slow-timeout = { period = "45m", terminate-after = 1, grace-period = "5s" }
+test-group = "serial-nested-cargo-builds"
+
+[[profile.default.overrides]]
+filter = "binary(no_default_features_build)"
+slow-timeout = { period = "20m", terminate-after = 1, grace-period = "5s" }
+test-group = "serial-nested-cargo-builds"
 
 [[profile.default.overrides]]
-# Serialise ignored exclusion integration tests when they are explicitly run.
+# Serialize ignored exclusion integration tests when they are explicitly run.
 # They build and stage the lint library before invoking `cargo dylint`, so they
 # share the same target-directory race risk as the UI harnesses above.
 filter = "binary(integration_exclusion)"

.github/workflows/ci.yml

@@ -69,11 +69,11 @@ jobs:
   coverage-check:
     if: github.event_name == 'pull_request'
     runs-on: ubicloud-standard-2-ubuntu-2404
-    # Above the 60 m nextest global timeout plus a cold build and the work
+    # Above the 85 m nextest global timeout plus a cold build and the work
     # either side of the suite. A ceiling merely above the suite's budget
     # cancels the job before nextest can report the overrun, and a
     # cancellation discards the log that would have explained it.
-    timeout-minutes: 100
+    timeout-minutes: 120
     defaults:
       run:
         shell: bash
@@ -505,7 +505,8 @@ jobs:
     # when the `ci` profile is selected, so the named toolchain and UI
     # tests were bounded; what nothing bounded was every other test, the
     # `ci` profile having declared no base `slow-timeout` of its own.
-    timeout-minutes: 100
+    # The 120 m job ceiling includes the 85 m suite budget and cold setup.
+    timeout-minutes: 120
     env:
       # `windows-latest` is a 4 vCPU GitHub-hosted shape, so it does not share
       # the Ubicloud constant used by the Linux lanes.

.github/workflows/coverage-main.yml

@@ -74,9 +74,9 @@ jobs:
     # admits `main` alone; the codescene environment contract holds it to
     # this job.
     environment: codescene
-    # Above the 60 m nextest global timeout plus a cold build and the work
+    # Above the 85 m nextest global timeout plus a cold build and the work
     # either side of the suite; kept in step with ci.yml's coverage lane.
-    timeout-minutes: 100
+    timeout-minutes: 120
     defaults:
       run:
         shell: bash

.gitignore

@@ -24,3 +24,6 @@ htmlcov/
 *.swp
 *.swo
 *~
+
+# Session scratch produced by local agent tooling.
+.memories/

.markdownlint-cli2.jsonc

@@ -18,6 +18,7 @@
     ".vtcode/**",
     ".terraform/**",
     ".uv-cache/**",
+    ".memories/**",
     "memories/**",
     "CRUSH.md"
   ]

Cargo.toml

@@ -39,6 +39,7 @@ toml = "1.1.2"
 metrics = "0.24.2"
 metrics-util = "0.20.1"
 tracing = { version = "0.1.44", default-features = false, features = ["attributes", "std"] }
+tracing-subscriber = "0.3.20"
 thiserror = "2"
 trybuild = "1.0.116"
 log = "0.4.28"
@@ -117,6 +118,7 @@ rstest = { workspace = true }
 rstest-bdd = { workspace = true }
 rstest-bdd-macros = { workspace = true }
 dylint_testing = { workspace = true }
+whitaker_test_macros = { workspace = true }
 
 [lints.clippy]
 pedantic = { level = "warn", priority = -1 }