Repository navigation
Conversation
|
Additional J615 hardware observations (2026-11-08): the currently running combined kernel is 7.2.11-dcpexp-usb-recovery-20261108, with asahi.t8122_pstate_cap=5 and asahi.m3_thermal=on. All nine locally modified thermal-related source/docs files are byte-for-byte identical between the earlier thermal working tree and this USB-recovery build tree. The installed Image matches the build Image by SHA-256; installed asahi/macsmc-hwmon module build IDs match the build artifacts. This is provenance for the combined local build, not a claim that the rebased PR branch was built or booted unchanged. The current boot registered all 12 listed J615 die keys. Runtime logs show cap 2 -> 3 -> 4 -> 5 with cool readings, and 5 -> 4 -> 3 -> 2 with readings of 80.5–83.8 C; the firmware summary reports peak state 5. The user reports stable unplug/replug and lid-open/closed use on this combined kernel. No sensor-failure injection or sustained thermal qualification was performed in this audit. Please keep the sensor/fallback correctness work separate from raising default performance limits. Review coordination with overlapping #135 is still needed, particularly explicit thermal-Off semantics. The all-keys requirement concerns the selected sensor list; it does not establish calibrated coverage of the hottest physical location, nor does it prevent an explicit partial sensor-list override. These observations do not establish hardware safety or qualify #317. |
Signed-off-by: Eric Juta <ericjohnjuta@gmail.com>
Signed-off-by: Eric Juta <ericjohnjuta@gmail.com>
Signed-off-by: Eric Juta <ericjohnjuta@gmail.com>
|
Rebased onto One real fix came out of this: the branch edits a help line in Tested at this head on an arm64 Arch host (clang 23.1.5), not on the CI image:
Not tested: this exact head has not been booted. The J615 hardware results above are from a combined local kernel that carries these changes with others. |
da758c5 to
6fc5876
Compare
J615 finding next to this PR: the board has no CPU thermal zonesThis PR's governor limits the GPU only. Separately, the J615 device tree ( Without zones (combined local kernel,
With the J613 block from 30db282 ("t8122-j613: Add CPU thermal zones") carried to the J615 unchanged (six zones, 58/95 C passive, 110 C critical, 6 W
Limits: one machine, local overlay on the packaged DTB, combined local kernels ( This does not change anything in this PR. It is a reason not to read the GPU governor as full thermal protection on the J615. I can send the zones as a separate |
|
Claude Code wrote this up from my tests. J615 (15-inch M3 Air) results for this PR's code. My kernel has #410's changed lines exactly as in
The session summaries found no asahi errors, faults or timeouts in the kernel log. The throughput and tuning numbers belong to the state 6 to 8 series (#317). I'll post them with the PR for it. |
|
Claude Code wrote this up from my tests. I ported this PR and #491 to 7.3 in aurora-silicon/linux#2203, together with #500, since 7.3 ships from aurora-silicon. Your four commits keep you as author and keep your Signed-off-by. My Signed-off-by follows yours. On 7.3 the die keys already come from |
|
@freber keep them in aurora-silicon/linux#2203, thanks. Authorship and sign-off as you have them is fine, and I'd rather not split the 7.3 review across two PRs. Dropping the J615 key table in favour of |
Summary
Separate the opt-in T8122 GPU performance ceiling from its boot/sensor-failure cap, and expose the complete J615 SoC die sensor set.
Three commits:
asahi.t8122_pstate_cap=5is requested. Off/hold cannot boost above the safe cap; lower requested ceilings still win. Add regression coverage for missing, failed, stale, stuck and implausible readings, pacing, hot/critical temperatures and recovery.The default ceiling remains 2. Non-T8122 cap selection is unchanged. This also conservatively bounds T8122 boards without usable sensor feedback.
Validation
rustc --edition=2021 --test tools/asahi/m3-runtime-tests.rs -o /tmp/j615-thermal-runtime-testsand execution: 24 passed on the rebased branch.bash -n tools/aurora-sep/air-gpu/air-gpu-oneshot.sh: passed.7.2.11-dcpexp-thermal+, configured withasahi.t8122_pstate_cap=5 asahi.m3_thermal=on, logs runtime cap 5 -> 4 -> 3 -> 2 at 80.3–80.5 C, then recovery 2 -> 3 -> 4 -> 5 at 66.5–67.7 C. This is observed runtime behavior, not proof that the freshly rebased branch is the running binary.Scope
Based on current
integration/aurora(8eddf5a). Excludes existing display/brightness PRs #354, #356 and #357, local boot deployment scripts, and USB power workarounds. The intermittent USB-C -28/revalidation failure is unresolved and is not claimed fixed here.