Repository navigation
Document T1 CS8409 speaker workaround on Mac support page - #15776
Alkarth2010 wants to merge 2 commits into
Conversation
Stock snd_hda_codec_cs8409 leaves 2016 Touch Bar Mac speakers silent. Record the davidjo DKMS install that restored sound on MacBookPro13,2.
[Low impact] The documentation changes appear safe to merge. SummaryDocuments an optional speaker workaround for MacBookPro13,2.
Reviews (2) · Last reviewed commit: "Keep the driver clone, and reboot rather..." · Reviewed by Greptile |
The installer links /usr/src/snd_hda_macbookpro-0.1 to the clone instead of copying it, so a user who deletes the clone after installing loses the DKMS rebuild on the next kernel update. The no-reboot reload named no codecs and left PipeWire holding the device, so it would fail with "in use"; reboot is the procedure the commands already end on. Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
Thanks for writing this up. I checked the new section against Omarchy at this head and against the upstream Codex Medium reviewed it as a second opinion and found two things, both confirmed against the upstream scripts, and I pushed one commit to your branch (f36927a) to fix them:
A second round from Codex Medium on the fix found nothing open. CI is green. Related: #8285, #11064, #12689 and #12968 propose installing a CS8409 driver automatically. If one of those lands, this section will need updating to match. Whether the manual should point users at an out-of-tree driver is the maintainer's call, so this now waits on them. |
|
Independent confirmation on MacBookPro13,2 (2016 13-inch, four Thunderbolt 3 ports):
One failure mode may be worth a line on the page. After a kernel update, the DKMS rebuild stopped while downloading kernel source (repeated IPv6 timeouts on my network). No module was built for the new kernel, so the in-tree module loaded and the speakers went silent, with nothing obviously wrong in PipeWire. Your success checks ( My setup notes, including the recovery and post-reboot checks, are in this gist. |
The Mac support page currently says T1 sound is not functioning. On MacBookPro13,2 (2016 13-inch with Touch Bar) running Omarchy 4.0.4 / kernel 7.2.5-3-omarchy, internal speakers work after installing davidjo/snd_hda_macbookpro via DKMS.
Stock
snd_hda_codec_cs8409loads and PipeWire shows Built-in Audio Analog Stereo, but the mainline codec never powers the speaker amps. This PR documents that workaround on the T1 known-issues list: packages viaomarchy pkg add,./install.cirrus.driver.sh -i, reboot (or unloadsnd_hda_intelfirst if reloading without reboot), and the success checks.This does not ship the module in the ISO. Same CS8409 stack exists on other 2016–2017 Intel Macs; the write-up only claims MacBookPro13,2.
Discussion with the full recipe: #15775