Repository navigation
Conversation
The Broadcom 1570 has no in-tree driver. Detect PCI 14e4:1570 and install facetimehd firmware, calibration data, and the DKMS module so new and existing Omarchy Macs get /dev/video0 after setup or omarchy update. The packaged facetimehd-dkms must be built from patjak/facetimehd after 54fb8f2; AUR 0.7.0.2 still calls strncpy and fails to compile on Linux 7.2.
|
Confirmed working on another supported Intel Mac, with one packaging update that may simplify this PR. Test system:
Installed and tested:
DKMS built successfully for The PR body's warning about stable AUR Strong support for the PCI-ID-gated install and migration. The exact package set proposed here works on MacBookAir6,2 and produces real 720p video, not just a loaded module. |
|
Hi, I was working on PR #13192 which partially fixed this, but was late. I have an A1466 with the Broadcom 14e4:1570 camera available for testing. The camera has already been verified manually on this machine: /dev/video0 appears and mpv captures 1280×720 at 30 fps. Once the package is available in [omarchy], I can validate it through a normal omarchy update. |
|
Tested on a MacBookPro12,1 (Early 2015 13"), On packaging: AUR On Small note: the migration doesn't Happy to validate through |
|
Follow-up to the recent camera reports: I ran
Fresh hardware retest on MacBookAir6,2, PCI
This validates current capture and the already-installed migration path. A fresh package installation through a normal The reboot observation matches the code at this revision: neither the install script nor migration calls One packaging detail for the remaining validation: this revision's |
|
Reviewed at 8bb9e8e against What was checked. On a disposable Omarchy VM (7.2.5-3-omarchy),
What that means if it merged today:
None of this is a defect in this branch's code. It is an ordering dependency on packaging in another repository, which is the maintainer's call. That includes redistributing Apple's camera firmware, and which Smaller points, not pushed:
Competing PRs. #11381 (older) targets the same camera. It installs from the AUR with Hardware. The camera itself could not be reproduced on a VM. The reports above from @drbree82 and @calebl were made with packages they built themselves, not from this head through Second opinion: Codex Medium reviewed the same head. It agreed on the package dependency and on #11381's root-install gap (independence not guaranteed). It found on its own the ISO build failure, which I then confirmed in the omarchy-iso builder, and the missing module load. It also suggested making Next: this waits on the maintainer to publish the facetimehd packages in |
|
Follow-up to the October 7 packaging review at unchanged head The dependency is still visible in the available metadata: The earlier AUR/DKMS and camera-capture reports demonstrate that the hardware can work, but do not validate this PR's fresh binary-repository installation path. I have not repeated a physical Mac capture in this follow-up or run the installer on unrelated hardware. Which package proposal should hardware testers follow for the coordinated install/update check? Once the binary packages are available, the remaining useful test is a normal install/update on |
|
The head is unchanged since the review above (8bb9e8e), so this only covers what is new: #12686, and whether #12686 is not a reason to close this one. It carries this PR's change and adds an Apple DMI vendor check before the PCI match ( Still blocked on packaging. Who checked it: Codex Medium compared all four PRs separately, without being told my answer. It reached the same conclusion and found the migration-retry test in #12686 without being pointed to it. Independence is not guaranteed. It also re-read this head against the current Next: this waits on the maintainer to publish the facetimehd packages, then on a hardware test of this head through |
What
Detect the Broadcom FaceTime HD PCIe webcam (
14e4:1570) and installfacetimehd-firmware,facetimehd-data, andfacetimehd-dkmsduring hardware setup. A migration covers existing installs.This is the 720p camera in 2013–2015 Intel Macs (this machine is a MacBookPro12,1). There is no in-tree driver.
Packaging
facetimehd-dkmsis not in[omarchy]yet. Please add it to the ISO/repo from current patjak/facetimehd master (after54fb8f2), not AUR0.7.0.2.Linux 7.2 removed
strncpyfrom the kernel API. AUR0.7.0.2still calls it infthd_v4l2.cand DKMS fails onlinux-omarchy7.2 with:Upstream already guards that call for kernels >= 4.2. I compiled
c5c7facagainst7.2.5-3-omarchyon this MacBook and it built cleanly.Also cache
facetimehd-firmwareandfacetimehd-data(already listed inomarchy-other.packages).Test plan
test/shell.d/facetimehd-test.sh./test/clifacetimehd-dkmsfrom current git is in[omarchy]14e4:1570,modinfo facetimehdand/dev/video0after install oromarchy update